Geometry and Procedure for Benchmarking SFF and Hybrid Fabrication Process Resolution

Since the advent of SFF and RP a number of SFF benchmarking geometries and methodologies have been developed and employed with some similarities but limited standardization. Minimal information has been published in regard to a standard method of measuring the resolution limits or capabilities of SFF and SFF-based hybrid processes. In an effort to benchmark resolution limits of SFF and Hybrid Fabrication processes, several benchmarking geometries were developed to capture the resolution capabilities, specifically hole size and rod size range, of multiple hybrid fabrication path steps and a hybrid path as a whole. These useful geometries are shared with the SFF community and procedures for their use are described in this paper.Mechanical Engineerin

Geometry and procedure for benchmarking SFF and hybrid fabrication process resolution

ABSTRACT Since the advent of SFF and RP a number of SFF benchmarking geometries and methodologies have been developed and employed with some similarities but limited standardization. Minimal information has been published in regard to a standard method of measuring the resolution limits or capabilities of SFF and SFF-based hybrid processes. In an effort to benchmark resolution limits of SFF and Hybrid Fabrication processes, several benchmarking geometries were developed to capture the resolution capabilities, specifically hole size and rod size range, of multiple hybrid fabrication path steps and a hybrid path as a whole. These useful geometries are shared with the SFF community and procedures for their use are described in this paper

Citizens United vs. FEC and Corporate Political Activism

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordThis paper analyzes the effect that the U.S. Supreme Court’s landmark decision on Citizens United vs. FEC had on corporate political activism. The decision opened the door for corporate treasuries to engage in independent political spending. Politically connected firms have lower announcement returns at the ruling than non-connected firms. The estimates suggest that the value of a political connection decreases by $6.9 million. To evaluate the effect of Citizens United on corporate political activism, we explore the fact that Citizens United also lifts bans on independent political spending in states where such bans existed. After the ruling, firms headquartered in states where bans are lifted have fewer state-level connections relative to firms in other states. Overall, our evidence supports the hypothesis that independent political spending crowds out political connections. We do not find any significant crowding-out effects of independent political expenditures on lobbying activity, executive contributions, and political action committees (PAC) contributions.Portuguese Foundation for Science and Technology-FC

A geoneutrino experiment at Homestake

A significant fraction of the 44TW of heat dissipation from the Earth's interior is believed to originate from the decays of terrestrial uranium and thorium. The only estimates of this radiogenic heat, which is the driving force for mantle convection, come from Earth models based on meteorites, and have large systematic errors. The detection of electron antineutrinos produced by these uranium and thorium decays would allow a more direct measure of the total uranium and thorium content, and hence radiogenic heat production in the Earth. We discuss the prospect of building an electron antineutrino detector approximately 700m^3 in size in the Homestake mine at the 4850' level. This would allow us to make a measurement of the total uranium and thorium content with a statistical error less than the systematic error from our current knowledge of neutrino oscillation parameters. It would also allow us to test the hypothesis of a naturally occurring nuclear reactor at the center of the Earth.Comment: proceedings for Neutrino Sciences 2005, submitted to Earth, Moon, and Planet

The provenance of Borneo's enigmatic alluvial diamonds:A case study from Cempaka, SE Kalimantan

Gem-quality diamonds have been found in several alluvial deposits across central and southern Borneo. Borneo has been a known source of diamonds for centuries, but the location of their primary igneous source remains enigmatic. Many geological models have been proposed to explain their distribution, including: the diamonds were derived from a local diatreme; they were brought to the surface through ophiolite obduction or exhumation of UHP metamorphic rocks; they were transported long distances southward via major Asian river systems; or, they were transported from the Australian continent before Borneo was rifted from its northwestern margin in the Late Jurassic. To assess these models, we conducted a study of the provenance of heavy minerals from Kalimantan's Cempaka alluvial diamond deposit. This involved collecting U–Pb isotopic data, fission track and trace element geochemistry of zircon as well as major element geochemical data of spinels and morphological descriptions of zircon and diamond. The results indicate that the Cempaka diamonds were likely derived from at least two sources, one which was relatively local and/or involved little reworking, and the other more distal which records several periods of reworking. The distal diamond source is interpreted to be diamond-bearing pipes that intruded the basement of a block that: (1) rifted from northwest Australia (East Java or SW Borneo) and the diamonds were recycled into its sedimentary cover, or: (2) were emplaced elsewhere (e.g. NW Australia) and transported to a block (e.g. East Java or SW Borneo). Both of these scenarios require the diamonds to be transported with the block when it rifted from NW Australia in the Late Jurassic. The local source could be diamondiferous diatremes associated with eroded Miocene high-K alkaline intrusions north of the Barito Basin, which would indicate that the lithosphere beneath SW Borneo is thick (~ 150 km or greater). The ‘local’ diamonds could also be associated with ophiolitic rocks that are exposed in the nearby Meratus Mountains

Seamounts off the West Antarctic margin: A case for non-hotspot driven intraplate volcanism

Highlights: • Marie Byrd Seamounts (MBS) formed off Antarctica at 65-56 Ma in an extensional regime • MBS originate from HIMU-type mantle attached at the base of the Antarctic lithosphere • Continental insulation flow transferred HIMU mantle into the oceanic mantle New radiometric age and geochemical data of volcanic rocks from the guyot-type Marie Byrd Seamounts (MBS) and the De Gerlache Seamounts and Peter I Island (Amundsen Sea) are presented. 40Ar/39Ar ages of the shield phase of three MBS are Early Cenozoic (65 to 56 Ma) and indicate formation well after creation of the Pacific-Antarctic Ridge. A Pliocene age (3.0 Ma) documents a younger phase of volcanism at one MBS and a Pleistocene age (1.8 Ma) for the submarine base of Peter I Island. Together with published data, the new age data imply that Cenozoic intraplate magmatism occurred at distinct time intervals in spatially confined areas of the Amundsen Sea, excluding an origin through a fixed mantle plume. Peter I Island appears strongly influenced by an EMII type mantle component that may reflect shallow mantle recycling of a continental raft during the final breakup of Gondwana. By contrast the Sr-Nd-Pb-Hf isotopic compositions of the MBS display a strong affinity to a HIMU type mantle source. On a regional scale the isotopic signatures overlap with those from volcanics related to the West Antarctic Rift System, and Cretaceous intraplate volcanics in and off New Zealand. We propose reactivation of the HIMU material, initially accreted to the base of continental lithosphere during the pre-rifting stage of Marie Byrd Land/Zealandia to explain intraplate volcanism in the Amundsen Sea in the absence of a long-lived hotspot. We propose continental insulation flow as the most plausible mechanism to transfer the sub-continental accreted plume material into the shallow oceanic mantle. Crustal extension at the southern boundary of the Bellingshausen Plate from about 74 to 62 Ma may have triggered adiabatic rise of the HIMU material from the base of Marie Byrd Land to form the MBS. The De Gerlache Seamounts are most likely related to a preserved zone of lithospheric weakness underneath the De Gerlache Gravity Anomaly

Composition and evolution of the melts erupted in 1996 at Karymskoe Lake, Eastern Kamchatka: Evidence from inclusions in minerals

The powerful eruption in the Akademii Nauk caldera on January 2, 1996, marked a new activity phase of Karymsky volcano and became a noticeable event in the history of modern volcanism in Kamchatka. The paper reports data obtained by studying more than 200 glassy melt inclusions in phenocrysts of olivine (Fo82–72), plagioclase (An92–73), and clinopyroxene (Mg# 83–70) in basalts of the 1996 eruption. The data were utilized to estimate the composition of the parental melt and the physicochemical parameters of the magma evolution. According to our data, the parental melt corresponded to low magnesian, highly aluminous basalt (SiO2 = 50.2 wt %, MgO = 5.6 wt %, Al2O3 = 17 wt %) of the mildly potassic type (K2O = 0.56 wt %) and contained much dissolved volatile components (H2O = 2.8 wt %, S = 0.17 wt %, and Cl = 0.11 wt %). Melt inclusions in the minerals are similar in chemical composition, a fact testifying that the minerals crystallized simultaneously with one another. Their crystallization started at a pressure of approximately 1.5 kbar, pro ceeded within a narrow temperature range of 1040 ± 20°C, and continued until a nearsurface pressure of approximately 100 bar was reached. The degree of crystallization of the parental melt during its eruption was close to 55%. Massive crystallization was triggered by H2O degassing under a pressure of less than 1 kbar. Magma degassing in an open system resulted in the escape of 82% H2O, 93% S, and 24% Cl (of their initial contents in the parental melt) to the fluid phase. The release of volatile compounds to the atmosphere during the eruption that lasted for 18 h was estimated at 1.7 × 106 t H2O, 1.4 × 105 t S, and 1.5 × 104 t Cl. The concen trations of most incompatible trace elements in the melt inclusions are close to those in the rocks and to the expected fractional differentiation trend. Melt inclusions in the plagioclase were found to be selectively enriched in Li. The Lienriched plagioclase with melt inclusions thought to originate from cumulate layers in the feeding system beneath Karymsky volcano, in which plagioclase interacted with Lirich melts/brines and was subsequently entrapped and entrained by the magma during the 1996 eruption

MPI-Ding reference glasses for in situ microanalysis: New reference values for element concentrations and isotope ratios

We present new analytical data of major and trace elements for the geological MPI-DING glasses KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, BM90/21-G, T1-G, and ATHO-G. Different analytical methods were used to obtain a large spectrum of major and trace element data, in particular, EPMA, SIMS, LA-ICPMS, and isotope dilution by TIMS and ICPMS. Altogether, more than 60 qualified geochemical laboratories worldwide contributed to the analyses, allowing us to present new reference and information values and their uncertainties (at 95% confidence level) for up to 74 elements. We complied with the recommendations for the certification of geological reference materials by the International Association of Geoanalysts (IAG). The reference values were derived from the results of 16 independent techniques, including definitive (isotope dilution) and comparative bulk (e.g., INAA, ICPMS, SSMS) and microanalytical (e.g., LA-ICPMS, SIMS, EPMA) methods. Agreement between two or more independent methods and the use of definitive methods provided traceability to the fullest extent possible. We also present new and recently published data for the isotopic compositions of H, B, Li, O, Ca, Sr, Nd, Hf, and Pb. The results were mainly obtained by high-precision bulk techniques, such as TIMS and MC-ICPMS. In addition, LA-ICPMS and SIMS isotope data of B, Li, and Pb are presented