Model based adaptive direct power control for three-level NPC converters

In this work, a Model Based Adaptive Direct Power Control (MB-ADPC) with constant switching frequency for Three-Phase Three-Level Neutral Point Clamped (3L-NPC) converters is proposed. The rectifier and inverter operation mode are used to illustrate the flexibility of the proposed MB-ADPC controller. The control design process is based on the continuous averaged model of the system. Depending on the operation mode different control objectives have to be guaranteed. The proposed controller ensures the voltage regulation of the dc-link capacitors for the rectifier operation mode and to achieve voltage balance in the dc-link capacitors and the active and reactive power tracking for the rectifier and inverter operation modes. In addition, adaptive techniques are used to avoid system parameters uncertainties as smoothing inductors and grid frequency values. This work shows that the application of advanced control strategies based on the system model allows enhancing the performance of the overall system. The details of the controllers design process and the experimental results using a 50 kVA Three-Phase Three-Level NPC prototype are presented in this paper validating the proposed controllers

Propuesta metodológica para la evaluación de proyectos en cinco pasos

Objective: To carry out a methodological proposal for the evaluation of projects in five steps, which allows the procedure to be developed in a practical, easy, fast and orderly manner, generating understanding, effectiveness and efficiency in the analysis and confidence in the results obtained. Design / methodology / approach: It is based on the analytical-deductive cost-benefit ratio and the extrapolation method. The problem was identified and the five steps for project evaluation were structured. Results: The methodology for the evaluation of projects in five steps is proposed. Limitations / implications: There is limited knowledge of the analysis process translated into a disarticulation of the development of the procedure and distrust of the results obtained. It is because the designer is not a financial specialist and lacks theoretical support and methodological focus on the subject. Findings / Conclusions: This methodological proposal allows the development of the procedure in a practical, easy, fast and orderly manner, generating understanding, effectiveness and efficiency in the analysis and confidence in the results obtained for the decision making in the instrumentation of the Projects. It does have theoretical-practical utility and strengthens the theory of project evaluation.Objetivo: Realizar una propuesta metodológica para la evaluación de proyectos en cinco pasos, que permita desarrollar el procedimiento de forma práctica, fácil, rápida y ordenada, generando comprensión, eficacia y eficiencia en el análisis y confianza en los resultados obtenidos. Diseño/metodología/aproximación: Se basa en el método analítico-deductivo relación beneficio-costo y el método de extrapolación. Se identificó el problema y se estructuró los cinco pasos para la evaluación de proyectos. Resultados: Se propone la metodología para la evaluación de proyectos en cinco pasos. Limitaciones / implicaciones: Existe un limitado conocimiento del proceso de análisis traducido en una desarticulación del desarrollo del procedimiento y desconfianza en los resultados obtenidos. Se debe a que el proyectista no es especialista financiero y carece de sustento teórico y enfoque metodológico en el tema. Hallazgos / conclusiones: La propuesta metodológica permite llevar a cabo el desarrollo del procedimiento de forma práctica, fácil, rápida y ordenada, generando comprensión, eficacia y eficiencia en el análisis y confianza en los resultados obtenidos para la toma de decisiones en la instrumentación de los proyectos. Sí tiene utilidad teórica–práctica y fortalece la teoría de evaluación de proyectos

Optimal Nitrogen Fertilization to Reach the Maximum Grain and Stover Yields of Maize (Zea mays L.): Tendency Modeling

Utilization of maize stover to the production of meat and milk and saving the grains for human consumption would be one strategy for the optimal usage of resources. Variance and tendency analyses were applied to find the optimal nitrogen (N) fertilization dose (0, 100, 145, 190, 240, and 290 kg/ha) for forage (F), stover (S), cob (C), and grain (G) yields, as well as the optimal grain-to-forage, cob-to-forage, and cob-to-stover ratios (G:F, C:F, and C:S, respectively). The study was performed in central Mexico (20.691389° N and −101.259722° W, 1740 m a.m.s.l.; Cwa (Köppen), 699 mm annual precipitation; alluvial soils). N-190 and N-240 improved the individual yields and ratios the most. Linear and quadratic models for CDM, GDM, and G:F ratio had coefficients of determination (R2) of 0.20–0.46 (p < 0.03). Cubic showed R2 = 0.30–0.72 (p < 0.02), and the best models were for CDM, GDM, and the G:F, C:F, and C:S DM ratios (R2 = 0.60–0.72; p < 0.0002). Neither SHB nor SDM negatively correlated with CDM or GDM (r = 0.23–0.48; p < 0.0001). Excess of N had negative effects on forage, stover, cobs, and grains yields, but optimal N fertilization increased the proportion of the G:F, C:F, and C:S ratios, as well as the SHB and SDM yields, without negative effects on grain production

Synergy between magneto-rheological fluids and aluminum foams. Prospective alternative for seismic damping

This is the accepted manuscript. Access to the published article can be gained at: http://jim.sagepub.com/cgi/reprint/1045389X15596624v1.pdf?ijkey=SyFHNQwE4XMQqBF&keytype=finiteThis article presents the experimental study of a preliminary investigation of a seismic damper device aimed at improving the behavior of structures when subjected to earthquakes. The damper is the result of a binomial material formed by aluminum foam with pores 1 mm in diameter, wetted by a magnetorheological fluid (MRF). The objective of the present work is to explore the synergy between the two components in a magnetorheological test, and to evaluate the effect of the Al foam pores in the structure buildup of the fluid. The analysis is completed with a compressive test carried out on the MRF-filled foam in the presence of a magnetic field. This kind of test demonstrates that the deformation of the foam for very small loads is limited by the hardening of the fluid because of its MR response. The results of this research suggest that there is a mutual benefit between the components of the device, presumably leading to an enhanced dissipation of vibration energy.Proyectos PE2012-FQM694 (Junta de Andalucía, Spain), FIS2013-47666-C3-1-R (MINECO, Spain), SENER-CONACYT "151496" (UNAM Mexico), CONACYT National Quality Graduate Progra

Respuesta productiva y económica del reemplazo parcial de mazorca de maíz quebrado con maíz molido o melaza para vacas de doble propósito

The aim of the study was to assess the effect of partial replacement of cracked maize ears with ground maize (GM) or sugar cane molasses (SCM) in supplements for dual purpose cows. Eighteen (18) multiparous cows (414 ± 13 kg of body weight and 106 ± 32 d in milk) were randomly assigned to the treatments. Treatments were as follows: 1) Control supplement (CS) which consisted of 87% of cracked maize ears (CME), 11% soybean meal, and 2% urea; 2) Ground maize replacing 20% of CME in CS (GMS); 3) Sugar cane molasses replacing 18% of CME in the CS (MOS). Each cow received 5 kg/d of supplement DM, whereas their calves received 1.8 kg/d DM of the CS. The experiment lasted eleven weeks, and data were recorded once at the end of every week. Data were analysed using a linear mixed model as a completely randomized design. Net profit from milk and beef due to supplements were estimated using the partial budget approach. There were no differences (P>0.05) between treatments on milk composition, body conditions score, nor daily weight gain of cows and calves. However, compared to GM, CS shown greater (9.0 %, P0.05) entre los tratamientos sobre la composición de la leche, la condición corporal ni el aumento de peso diario de las vacas y terneros. Sin embargo, en comparación con el MM, el ST mostró mayor (9.0 %, P0.05) en las demás variables de respuesta. Los márgenes combinados de ganancias netas (ventas de leche y terneros), fueron 9 % mayores para el tratamiento con MCA en comparación con el resto de los suplementos

Morbid liver manifestations are intrinsically bound to metabolic syndrome and nutrient intake based on a machine-learning cluster analysis

Metabolic syndrome (MetS) is one of the most important medical problems around the world. Identification of patient ' s singular characteristic could help to reduce the clinical impact and facilitate individualized management. This study aimed to categorize MetS patients using phenotypical and clinical variables habitually collected during health check-ups of individuals considered to have high cardiovascular risk. The selected markers to categorize MetS participants included anthropometric variables as well as clinical data, biochemical parameters and prescribed pharmacological treatment. An exploratory factor analysis was carried out with a subsequent hierarchical cluster analysis using the z-scores from factor analysis. The first step identified three different factors. The first was determined by hypercholesterolemia and associated treatments, the second factor exhibited glycemic disorders and accompanying treatments and the third factor was characterized by hepatic enzymes. Subsequently four clusters of patients were identified, where cluster 1 was characterized by glucose disorders and treatments, cluster 2 presented mild MetS, cluster 3 presented exacerbated levels of hepatic enzymes and cluster 4 highlighted cholesterol and its associated treatments Interestingly, the liver status related cluster was characterized by higher protein consumption and cluster 4 with low polyunsaturated fatty acid intake. This research emphasized the potential clinical relevance of hepatic impairments in addition to MetS traditional characterization for precision and personalized management of MetS patients

Seropositivity rates for agents of canine vector-borne diseases in Spain : a multicentre study

Background: Controlling canine vector-borne diseases (CVBD) is a major concern, since some of these diseases are serious zoonoses. This study was designed to determine seropositivity rates in Spain for agents causing the following five CVBD: leishmaniosis (Leishmania infantum: Li), heartworm (Dirofilaria immitis: Di), ehrlichiosis (Ehrlichia canis: Ec), anaplasmosis (Anaplasma phagocytophilum/Anaplasma platys: An) and Lyme disease (Borrelia burgdorferi: Bb). Methods: Anti-An, -Bb, and -Ec antibodies and the Di antigen were determined using the 4DX SNAP® Test (IDEXX Laboratories) and anti-L. infantum (Li) antibodies using the Leishmania SNAP® Test (IDEXX Laboratories) in blood and/or serum samples. Results: Among 1100 dogs examined, overall seropositivity rates were: Li (15.7%), Ec (5%), An (3.1%), Di (1.25%) and Bb (0.4%). While seropositivity towards Bb and Di was similar in all geographic regions, rates were significantly higher in the east of Spain (8.3%) for An, significantly higher in the north (20%) for Ec, and significantly higher in the Southeast (46.6%) and South (27.4%), and significantly lower in the north (0%) for Li. No statistical associations were observed between sex and the CVBD analyzed (p ≥ 0.05) while the following associations with other variables were detected: a higher seropositivity to Ec (40%) and Bb (6.7%) in dogs under one year of age compared with adults (p < 0.05); and a higher seropositivity to An and Li in dogs that lived outdoors versus indoors (p = 0.01; p < 0.001, respectively). Seropositivity rates of 2.1%, 0%, 1.7%, 0.5% and 4.2% were recorded respectively for An, Bb, Ec, Di and Li in dogs with no clinical signs (n = 556) versus 3.8%, 0.6%, 7.5%, 1.8% and 25.9% for those with signs (n = 507) suggestive of a CVBD. Conclusion: The data obtained indicate a risk for dogs in Spain of acquiring any of the five CVBD examined. Veterinarians in the different regions should include these diseases in their differential diagnoses and recommend the use of repellents and other prophylactic measures to prevent disease transmission by arthropod vectors. Public health authorities also need to become more involved in the problem, since some of the CVBD examined here also affect humans

Immunity and vaccine development efforts against Trypanosoma cruzi

Artículo de revisión especializadoTrypanosoma cruzi (T. cruzi) is the causative agent for Chagas disease (CD). There is a critical lack of methods for prevention of infection or treatment of acute infection and chronic disease. Studies in experimental models have suggested that the protective immunity against T. cruzi infection requires the elicitation of Th1 cytokines, lytic antibodies and the concerted activities of macrophages, T helper cells, and cytotoxic T lymphocytes (CTLs). In this review, we summarize the research efforts in vaccine development to date and the challenges faced in achieving an efficient prophylactic or therapeutic vaccine against human CD.UTM

A922 Sequential measurement of 1 hour creatinine clearance (1-CRCL) in critically ill patients at risk of acute kidney injury (AKI)

Meeting abstrac

Collaborative Database to Track Mass Mortality Events in the Mediterranean Sea

Anthropogenic climate change, and global warming in particular, has strong and increasing impacts on marine ecosystems (Poloczanska et al., 2013; Halpern et al., 2015; Smale et al., 2019). The Mediterranean Sea is considered a marine biodiversity hot-spot contributing to more than 7% of world's marine biodiversity including a high percentage of endemic species (Coll et al., 2010). The Mediterranean region is a climate change hotspot, where the respective impacts of warming are very pronounced and relatively well documented (Cramer et al., 2018). One of the major impacts of sea surface temperature rise in the marine coastal ecosystems is the occurrence of mass mortality events (MMEs). The first evidences of this phenomenon dated from the first half of'80 years affecting the Western Mediterranean and the Aegean Sea (Harmelin, 1984; Bavestrello and Boero, 1986; Gaino and Pronzato, 1989; Voultsiadou et al., 2011). The most impressive phenomenon happened in 1999 when an unprecedented large scale MME impacted populations of more than 30 species from different phyla along the French and Italian coasts (Cerrano et al., 2000; Perez et al., 2000). Following this event, several other large scale MMEs have been reported, along with numerous other minor ones, which are usually more restricted in geographic extend and/or number of affected species (Garrabou et al., 2009; Rivetti et al., 2014; Marbà et al., 2015; Rubio-Portillo et al., 2016, authors' personal observations). These events have generally been associated with strong and recurrent marine heat waves (Crisci et al., 2011; Kersting et al., 2013; Turicchia et al., 2018; Bensoussan et al., 2019) which are becoming more frequent globally (Smale et al., 2019). Both field observations and future projections using Regional Coupled Models (Adloff et al., 2015; Darmaraki et al., 2019) show the increase in Mediterranean sea surface temperature, with more frequent occurrence of extreme ocean warming events. As a result, new MMEs are expected during the coming years. To date, despite the efforts, neither updated nor comprehensive information can support scientific analysis of mortality events at a Mediterranean regional scale. Such information is vital to guide management and conservation strategies that can then inform adaptive management schemes that aim to face the impacts of climate change.MV-L was supported by a postdoctoral contract Juan de la Cierva-Incorporación (IJCI-2016-29329) of Ministerio de Ciencia, Innovación y Universidades. AI was supported by a Technical staff contract (PTA2015-10829-I) Ayudas Personal Técnico de Apoyo of Ministerio de Economía y Competitividad (2015). Interreg Med Programme (grant number Project MPA-Adapt 1MED15_3.2_M2_337) 85% cofunded by the European Regional Development Fund, the MIMOSA project funded by the Foundation Prince Albert II Monaco and the European Union's Horizon 2020 research and innovation programme under grant agreement no 689518 (MERCES). DG-G was supported by an FPU grant (FPU15/05457) from the Spanish Ministry of Education. J-BL was partially supported by the Strategic Funding UID/Multi/04423/2013 through national funds provided by FCT - Foundation for Science and Technology and European Regional Development Fund (ERDF), in the framework of the programme PT2020