Employing wavelength diversity to improve SOA gain uniformity

In this paper, we propose a wavelength diversity technique for the semiconductor optical amplifier (SOA) to improve the gain uniformity for ultra-high speed optical routers. In such routers, fast SOA gain recovery is required to ensure the minimum gain standard deviation and thus leading to reduction in the system power penalty. The SOA is modeled using a segmentation technique and the detailed theoretical analysis for the model is presented. A direct temporal analysis of the impact of the signal wavelength on the SOA gain is investigated. The SOA gain profile when injected with a burst of input Gaussian pulses for a single wavelength and the proposed wavelength diversity technique are investigated. The operation principle is simulated and the results show a reduction in the gain standard deviation (at 1 mW input power) of 13.1, 11, 8.1, 6.2 and 4.8 dB for the data rates of 10, 20, 40, 80 and 160 Gb/s, respectively

Optimisation of the key SOA parameters for amplification and switching

Wireless Sensor Networks (WSN) are composed of small, low cost, resource-constrained computing nodes equipped with low power wireless transceivers. Generally, they are embedded in their environment to perform some specific monitoring and/or control function. Unlike wired networks that have dedicated routers for network connectivity and message forwarding, every node in a WSN can act as a router in a multi-hop network. A WSN can offer a cheap, applicationspecific solution in a variety of situations including military and disaster response scenarios, where other approaches are not viable. Due to their unattended nature and deployment in possibly hostile environmental conditions, there are many challenges in ensuring that a WSN is formed effectively and survives long enough to fulfil its function. Securing a WSN against attack is a particular challenge. Traditional encryption mechanisms are resource hungry and are not sufficient alone to provide a complete solution. This project is concerned with secure routing protocols. Formal methods are used to model and analyse the design of existing protocols and to demonstrate some previously unreported weaknesses

An ultrafast 1 x M all-optical WDM packet-switched router based on the PPM header address

This paper presents an all-optical 1 x M WDM router architecture for packet routing at multiple wavelengths simultaneously, with no wavelength conversion modules. The packet header address adopted is based on the pulse position modulation (PPM) format, thus enabling the use of only a singlebitwise optical AND gate for fast header address correlation. It offers multicast as well as broadcast capabilities. It is shown that a high speed packet routing at 160 Gb/s can be achieved with a low channel crosstalk (CXT) of ~ -27 dB at a channel spacing of greater than 0.4 THz and a demultiplexer bandwidth of 500 GHz

1 x M packet-switched router based on the PPM header address for all-optical WDM networks

This paper presents an all-optical 1xM router architecture for simultaneous multiple-wavelength packet routing, without the need for wavelength conversion. The packet header address is based on the pulse position modulation (PPM) format, which allows the use of only a single-bitwise optical AND gate for fast packet header address correlation. The proposed scheme offers both multicast and broadcast capabilities. We’ve demonstrated a high speed packet routing at 160 Gb/s in simulation, with a low channel crosstalk (CXT) of ~ -27 dB with a channel spacing of > 0.4 THz and a demultiplexer bandwidth of 500 GHz. The output transfer function of the PPM header processing (PPM-HP) module is also investigated in this paper

Impact of signal wavelength on the semiconductor opticalamplifier gain uniformity for high speed optical routers employing the segmentation model

This paper investigates the impact of a train of input Gaussian pulses wavelength on semiconductor optical amplifier (SOA) gain uniformity for high speed applications. In high speed applications, the linear output gain of the input pulses is necessary in order to minimize the gain standard deviation and power penalties. A segmentation model of the SOA is demonstrated to utilize the complete rate equations. The SOA gain profile when injected with a burst of input signal is presented. A direct temporal analysis of the effect of the burst wavelength on the SOA gain and the output gain standard deviation is investigated. The output gain uniformity dependence on the input burst power and wavelength within the C-band spectrum range is analyzed. Results obtained show the proportionality of the peak-gain conditions for the SOA on the nonlinearity of the output gain achieved by the input pulses

Characterization of RGB LEDs as Emitter and Photodetector for LED-to-LED Communication

Visible Light Communication (VLC) has rapidly grown over the last decade. However, unlike RF technologies, VLC has a simplex channel since two different devices are used for transmitting and receiving. This increases the cost and complexity of the transceiver circuit when a bidirectional link is required. LED-to-LED communication is a potential solution for a half-duplex channel. It utilizes the LED as photodetector for detection. This paper practically examines the RGB LED characteristics with emphasis on responsivity, wavelength sensitivity and angular response. The LED photodetector has a bandwidth of 6 MHz, responsivity of 256 nA/mW and FWHM of 18°

Experimental Characterization of RGB LED Transceiver in Low-Complexity LED-to-LED Link

This paper proposes a low-complexity and energy-efficient light emitting diode (LED)-to-LED communication system for Internet of Things (IoT) devices with data rates up to 200 kbps over an error-free transmission distance up to 7 cm. The system is based on off-the-shelf red-green-blue (RGB) LEDs, of which the red sub-LED is employed as photodetector in photovoltaic mode while the green sub-LED is the transmitter. The LED photodetector is characterized in the terms of its noise characteristics and its response to the light intensity. The system performance is then analysed in terms of bandwidth, bit error rate (BER) and the signal to noise ratio (SNR). A matched filter is proposed, which optimises the performance and increases the error-free distance

The SCIDOTS Project: Evidence of benefits of an integrated tobacco cessation intervention in tuberculosis care on treatment outcomes

<p>Abstract</p> <p>Background</p> <p>There is substantial evidence to support the association between tuberculosis (TB) and tobacco smoking and that the smoking-related immunological abnormalities in TB are reversible within six weeks of cessation. Therefore, connecting TB and tobacco cessation interventions may produce significant benefits and positively impact TB treatment outcomes. However, no study has extensively documented the evidence of benefits of such integration. SCIDOTS Project is a study from the context of a developing nation aimed to determine this.</p> <p>Methods</p> <p>An integrated TB-tobacco intervention was provided by trained TB directly observed therapy short-course (DOTS) providers at five chest clinics in Malaysia. The study was a prospective non-randomized controlled intervention using quasi-experimental design. Using Transtheoretical Model approach, 120 eligible participants who were current smokers at the time of TB diagnosis were assigned to either of two treatment groups: conventional TB DOTS plus smoking cessation intervention (integrated intervention or SCIDOTS group) or conventional TB DOTS alone (comparison or DOTS group). At baseline, newly diagnosed TB patients considering quitting smoking within the next 30 days were placed in the integrated intervention group, while those who were contemplating quitting were assigned to the comparison group. Eleven sessions of individualized cognitive behavioral therapy with or without nicotine replacement therapy were provided to each participant in the integrated intervention group. The impacts of the novel approach on biochemically validated smoking cessation and TB treatment outcomes were measured periodically as appropriate.</p> <p>Results</p> <p>A linear effect on both 7-day point prevalence abstinence and continuous abstinence was observed over time in the intervention group. At the end of 6 months, patients who received the integrated intervention had significantly higher rate of success in quitting smoking when compared with those who received the conventional TB treatment alone (77.5% vs. 8.7%; p < 0.001). Furthermore, at the end of TB treatment (6 months or later), there were significantly higher rates of treatment default (15.2% vs. 2.5%; p = 0.019) and treatment failure (6.5% vs. 0%; p = 0.019) in the DOTS group than in the SCIDOTS group.</p> <p>Conclusion</p> <p>This study provides evidence that connecting TB-tobacco treatment strategy is significant among TB patients who are smokers. The findings suggest that the integrated approach may be beneficial and confer advantages on short-term outcomes and possibly on future lung health of TB patients who quit smoking. This study may have important implications on health policy and clinical practice related to TB management among tobacco users.</p

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London