331 research outputs found

    Broadband classification and statistics of echoes from aggregations of fish measured by long-range, mid-frequency sonar

    Get PDF
    Author Posting. © Acoustical Society of America, 2017. This article is posted here by permission of Acoustical Society of America for personal use, not for redistribution. The definitive version was published in Journal of the Acoustical Society of America 141 (2017): 4354, doi:10.1121/1.4983446.For horizontal-looking sonar systems operating at mid-frequencies (1–10 kHz), scattering by fish with resonant gas-filled swimbladders can dominate seafloor and surface reverberation at long-ranges (i.e., distances much greater than the water depth). This source of scattering, which can be difficult to distinguish from other sources of scattering in the water column or at the boundaries, can add spatio-temporal variability to an already complex acoustic record. Sparsely distributed, spatially compact fish aggregations were measured in the Gulf of Maine using a long-range broadband sonar with continuous spectral coverage from 1.5 to 5 kHz. Observed echoes, that are at least 15 decibels above background levels in the horizontal-looking sonar data, are classified spectrally by the resonance features as due to swimbladder-bearing fish. Contemporaneous multi-frequency echosounder measurements (18, 38, and 120 kHz) and net samples are used in conjunction with physics-based acoustic models to validate this approach. Furthermore, the fish aggregations are statistically characterized in the long-range data by highly non-Rayleigh distributions of the echo magnitudes. These distributions are accurately predicted by a computationally efficient, physics-based model. The model accounts for beam-pattern and waveguide effects as well as the scattering response of aggregations of fish.This research was supported by the U.S. Office of Naval Research, the National Oceanographic Partnership Program, NOAA, WHOI, and the Oceanographer of the U.S. Navy

    WFPC2 Observations of the Hubble Deep Field-South

    Get PDF
    The Hubble Deep Field-South observations targeted a high-galactic-latitude field near QSO J2233-606. We present WFPC2 observations of the field in four wide bandpasses centered at roughly 300, 450, 606, and 814 nm. Observations, data reduction procedures, and noise properties of the final images are discussed in detail. A catalog of sources is presented, and the number counts and color distributions of the galaxies are compared to a new catalog of the HDF-N that has been constructed in an identical manner. The two fields are qualitatively similar, with the galaxy number counts for the two fields agreeing to within 20%. The HDF-S has more candidate Lyman-break galaxies at z > 2 than the HDF-N. The star-formation rate per unit volume computed from the HDF-S, based on the UV luminosity of high-redshift candidates, is a factor of 1.9 higher than from the HDF-N at z ~ 2.7, and a factor of 1.3 higher at z ~ 4.Comment: 93 pages, 25 figures; contains very long table

    Fresh air in the 21st century?

    Get PDF
    Ozone is an air quality problem today for much of the world's population. Regions can exceed the ozone air quality standards (AQS) through a combination of local emissions, meteorology favoring pollution episodes, and the clean-air baseline levels of ozone upon which pollution builds. The IPCC 2001 assessment studied a range of global emission scenarios and found that all but one projects increases in global tropospheric ozone during the 21st century. By 2030, near-surface increases over much of the northern hemisphere are estimated to be about 5 ppb (+2 to +7 ppb over the range of scenarios). By 2100 the two more extreme scenarios project baseline ozone increases of >20 ppb, while the other four scenarios give changes of -4 to +10 ppb. Even modest increases in the background abundance of tropospheric ozone might defeat current AQS strategies. The larger increases, however, would gravely threaten both urban and rural air quality over most of the northern hemisphere

    Transport impacts on atmosphere and climate: Land transport

    Get PDF
    Emissions from land transport, and from road transport in particular, have significant impacts on the atmosphere and on climate change. This assessment gives an overview of past, present and future emissions from land transport, of their impacts on the atmospheric composition and air quality, on human health and climate change and on options for mitigation. In the past vehicle exhaust emission control has successfully reduced emissions of nitrogen oxides, carbon monoxide, volatile organic compounds and particulate matter. This contributed to improved air quality and reduced health impacts in industrialised countries. In developing countries however, pollutant emissions have been growing strongly, adversely affecting many populations. In addition, ozone and particulate matter change the radiative balance and hence contribute to global warming on shorter time scales. Latest knowledge on the magnitude of land transport's impact on global warming is reviewed here. In the future, road transport's emissions of these pollutants are expected to stagnate and then decrease globally. This will then help to improve the air quality notably in developing countries. On the contrary, emissions of carbon dioxide and of halocarbons from mobile air conditioners have been globally increasing and are further expected to grow. Consequently, road transport's impact on climate is gaining in importance. The expected efficiency improvements of vehicles and the introduction of biofuels will not be sufficient to offset the expected strong growth in both, passenger and freight transportation. Technical measures could offer a significant reduction potential, but strong interventions would be needed as markets do not initiate the necessary changes. Further reductions would need a resolute expansion of low-carbon fuels, a tripling of vehicle fuel efficiency and a stagnation in absolute transport volumes. Land transport will remain a key sector in climate change mitigation during the next decades

    Impact of forest fires, biogenic emissions and high temperatures on the elevated Eastern Meditteranean ozone levels during the hot summer of 2007

    Get PDF
    The hot summer of 2007 in southeast Europe has been studied using two regional atmospheric chemistry models; WRF-Chem and EMEP MSC-W. The region was struck by three heat waves and a number of forest fire episodes, greatly affecting air pollution levels. We have focused on ozone and its precursors using state-of-the-art inventories for anthropogenic, biogenic and forest fire emissions. The models have been evaluated against measurement data, and processes leading to ozone formation have been quantified. Heat wave episodes are projected to occur more frequently in a future climate, and therefore this study also makes a contribution to climate change impact research. The plume from the Greek forest fires in August 2007 is clearly seen in satellite observations of CO and NO2 columns, showing extreme levels of CO in and downwind of the fires. Model simulations reflect the location and influence of the fires relatively well, but the modelled magnitude of CO in the plume core is too low. Most likely, this is caused by underestimation of CO in the emission inventories, suggesting that the CO/NOx ratios of fire emissions should be re-assessed. Moreover, higher maximum values are seen in WRF-Chem than in EMEP MSC-W, presumably due to differences in plume rise altitudes as the first model emits a larger fraction of the fire emissions in the lowermost model layer. The model results are also in fairly good agreement with surface ozone measurements. Biogenic VOC emissions reacting with anthropogenic NOx emissions are calculated to contribute significantly to the levels of ozone in the region, but the magnitude and geographical distribution depend strongly on the model and biogenic emission module used. During the July and August heat waves, ozone levels increased substantially due to a combination of forest fire emissions and the effect of high temperatures. We found that the largest temperature impact on ozone was through the temperature dependence of the biogenic emissions, closely followed by the effect of reduced dry deposition caused by closing of the plants’ stomata at very high temperatures. The impact of high temperatures on the ozone chemistry was much lower. The results suggest that forest fire emissions, and the temperature effect on biogenic emissions and dry deposition, will potentially lead to substantial ozone increases in a warmer climate

    Analysis of meteorology-chemistry interactions during air pollution episodes using online coupled models within AQMEII Phase-2

    Get PDF
    This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).This study reviews the top ranked meteorology and chemistry interactions in online coupled models recommended by an experts’ survey conducted in COST Action EuMetChem and examines the sensitivity of those interactions during two pollution episodes: the Russian forest fires 25 Jul -15 Aug 2010 and a Saharan dust transport event from 1 Oct -31 Oct 2010 as a part of the AQMEII phase-2 exercise. Three WRF-Chem model simulations were performed for the forest fire case for a baseline without any aerosol feedback on meteorology, a simulation with aerosol direct effects only and a simulation including both direct and indirect effects. For the dust case study, eight WRF-Chem and one WRF-CMAQ simulations were selected from the set of simulations conducted in the framework of AQMEII. Of these two simulations considered no feedbacks, two included direct effects only and five simulations included both direct and indirect effects. The results from both episodes demonstrate that it is important to include the meteorology and chemistry interactions in online-coupled models. Model evaluations using routine observations collected in AQMEII phase-2 and observations from a station in Moscow show that for the fire case the simulation including only aerosol direct effects has better performance than the simulations with no aerosol feedbacks or including both direct and indirect effects. The normalized mean biases are significantly reduced by 10-20% for PM10 when including aerosol direct effects. The analysis for the dust case confirms that models perform better when including aerosol direct effects, but worse when including both aerosol direct and indirect effects, which suggests that the representation of aerosol indirect effects needs to be improved in the model.Peer reviewedFinal Published versio

    Trend analysis of greenhouse gases over Europe measured by a network of ground-based remote FTIR instruments

    Get PDF
    This paper describes the statistical analysis of annual trends in long term datasets of greenhouse gas measurements taken over ten or more years. The analysis technique employs a bootstrap resampling method to determine both the long-term and intra-annual variability of the datasets, together with the uncertainties on the trend values. The method has been applied to data from a European network of ground-based solar FTIR instruments to determine the trends in the tropospheric, stratospheric and total columns of ozone, nitrous oxide, carbon monoxide, methane, ethane and HCFC-22. The suitability of the method has been demonstrated through statistical validation of the technique, and comparison with ground-based in-situ measurements and 3-D atmospheric models.Peer reviewe

    Monthly resolved modelled oceanic emissions of carbonyl sulfide and carbon disulfide for the period 2000–2019

    Get PDF
    Carbonyl sulfide (OCS) is the most abundant, long-lived sulphur gas in the atmosphere and a major supplier of sulfur to the stratospheric sulfate aerosol layer. The short-lived gas carbon disulfide (CS2) is oxidized to OCS and constitutes a major indirect source to the atmospheric OCS budget. The atmospheric budget of OCS is not well constrained due to a large missing source needed to compensate for substantial evidence that was provided for significantly higher sinks. Oceanic emissions are associated with major uncertainties. Here we provide a first, monthly resolved ocean emission inventory of both gases for the period 2000–2019 (available at https://doi.org/10.5281/zenodo.4297010) (Lennartz et al., 2020a). Emissions are calculated with a numerical box model (resolution 2.8° × 2.8° at equator, T42 grid) for the surface mixed layer. We find that interannual variability in OCS emissions is smaller than seasonal variability, and is mainly driven by variations in chromophoric dissolved organic matter (CDOM), which influences both photochemical and light-independent production. A comparison with a global database of more than 2500 measurements reveals overall good agreement. Emissions of CS2 constitute a larger sulfur source to the atmosphere than OCS, and equally show interannual variability connected to variability of CDOM. The emission estimate of CS2 is associated with higher uncertainties, as process understanding of the marine cycling of CS2 is incomplete. We encourage the use of the data provided here as input for atmospheric modelling studies to further assess the atmospheric OCS budget and the role of OCS in climate
    corecore