1,166 research outputs found

    Functionalization of PLLA with Polymer Brushes to Trigger the Assembly of Fibronectin into Nanonetworks

    Get PDF
    [EN] Poly-l-lactic acid (PLLA) has been used as a biodegradable polymer for many years; the key characteristics of this polymer make it a versatile and useful resource for regenerative medicine. However, it is not inherently bioactive. Thus, here, a novel process is presented to functionalize PLLA surfaces with poly(ethyl acrylate) (PEA) brushes to provide biological functionality through PEA's ability to induce spontaneous organization of the extracellular matrix component fibronectin (FN) into physiological-like nanofibrils. This process allows control of surface biofunctionality while maintaining PLLA bulk properties (i.e., degradation profile, mechanical strength). The new approach is based on surface-initiated atomic transfer radical polymerization, which achieves a molecularly thin coating of PEA on top of the underlying PLLA. Beside surface characterization via atomic force microscopy, X-ray photoelectron spectroscopy and water contact angle to measure PEA grafting, the biological activity of this surface modification is investigated. PEA brushes trigger FN organization into nanofibrils, which retain their ability to enhance adhesion and differentiation of C2C12 cells. The results demonstrate the potential of this technology to engineer controlled microenvironments to tune cell fate via biologically active surface modification of an otherwise bioinert biodegradable polymer, gaining wide use in tissue engineering applications.The authors acknowledge the EPSRC (EP/P001114/1) and MRC (MR/S005412/1) funding. The authors also acknowledge the EPSRC funding as part of the Doctoral Training Centre EP/F500424/1. This work was also funded by a grant from the UK Regenerative Medicine Platform. X-ray photoelectron spectroscopy was conducted by the National EPSRC XPS Users' Service (NEXUS), Newcastle.Sprott, MR.; Ferrer, G.; Dalby, MJ.; Salmerón Sánchez, M.; Cantini, M. (2019). Functionalization of PLLA with Polymer Brushes to Trigger the Assembly of Fibronectin into Nanonetworks. Advanced Healthcare Materials (Online). 8(3):1-12. https://doi.org/10.1002/adhm.201801469S11283A. J. Rincon Lasprilla G. A. Rueda Martinez B. H. Lunelli J. E. Jaimes Figueroa A. L. Jardini R. Maciel Filho Chem. Eng. Trans 2011 985Khan, F., Tanaka, M., & Ahmad, S. R. (2015). Fabrication of polymeric biomaterials: a strategy for tissue engineering and medical devices. Journal of Materials Chemistry B, 3(42), 8224-8249. doi:10.1039/c5tb01370dXu, F. J., Yang, X. C., Li, C. Y., & Yang, W. T. (2011). Functionalized Polylactide Film Surfaces via Surface-Initiated ATRP. Macromolecules, 44(7), 2371-2377. doi:10.1021/ma200160hKhan, F., & Tanaka, M. (2017). Designing Smart Biomaterials for Tissue Engineering. International Journal of Molecular Sciences, 19(1), 17. doi:10.3390/ijms19010017Zhao, P., Gu, H., Mi, H., Rao, C., Fu, J., & Turng, L. (2017). Fabrication of scaffolds in tissue engineering: A review. Frontiers of Mechanical Engineering, 13(1), 107-119. doi:10.1007/s11465-018-0496-8Zou, Y., Zhang, L., Yang, L., Zhu, F., Ding, M., Lin, F., … Li, Y. (2018). «Click» chemistry in polymeric scaffolds: Bioactive materials for tissue engineering. Journal of Controlled Release, 273, 160-179. doi:10.1016/j.jconrel.2018.01.023Pyun, J., Kowalewski, T., & Matyjaszewski, K. (2005). Polymer Brushes by Atom Transfer Radical Polymerization. Polymer Brushes, 51-68. doi:10.1002/3527603824.ch2Matyjaszewski, K., Dong, H., Jakubowski, W., Pietrasik, J., & Kusumo, A. (2007). Grafting from Surfaces for «Everyone»:  ARGET ATRP in the Presence of Air. Langmuir, 23(8), 4528-4531. doi:10.1021/la063402eDatta, H., Bhowmick, A. K., & Singha, N. K. (2008). Tailor-made hybrid nanostructure of poly(ethyl acrylate)/clay by surface-initiated atom transfer radical polymerization. Journal of Polymer Science Part A: Polymer Chemistry, 46(15), 5014-5027. doi:10.1002/pola.22829Simakova, A., Averick, S. E., Konkolewicz, D., & Matyjaszewski, K. (2012). Aqueous ARGET ATRP. Macromolecules, 45(16), 6371-6379. doi:10.1021/ma301303bSiegwart, D. J., Oh, J. K., & Matyjaszewski, K. (2012). ATRP in the design of functional materials for biomedical applications. Progress in Polymer Science, 37(1), 18-37. doi:10.1016/j.progpolymsci.2011.08.001Liu, P., & Su, Z. (2005). Surface-initiated atom transfer radical polymerization (SI-ATRP) of n-butyl acrylate from starch granules. Carbohydrate Polymers, 62(2), 159-163. doi:10.1016/j.carbpol.2005.07.018Yu, Q., Johnson, L. M., & López, G. P. (2014). Nanopatterned Polymer Brushes for Triggered Detachment of Anchorage-Dependent Cells. Advanced Functional Materials, 24(24), 3751-3759. doi:10.1002/adfm.201304274Zhu, A., Zhang, M., Wu, J., & Shen, J. (2002). Covalent immobilization of chitosan/heparin complex with a photosensitive hetero-bifunctional crosslinking reagent on PLA surface. Biomaterials, 23(23), 4657-4665. doi:10.1016/s0142-9612(02)00215-6Matyjaszewski, K. (2012). Atom Transfer Radical Polymerization (ATRP): Current Status and Future Perspectives. Macromolecules, 45(10), 4015-4039. doi:10.1021/ma3001719Zhu, Y., Gao, C., Liu, X., He, T., & Shen, J. (2004). Immobilization of Biomacromolecules onto Aminolyzed Poly(L-lactic acid) toward Acceleration of Endothelium Regeneration. Tissue Engineering, 10(1-2), 53-61. doi:10.1089/107632704322791691Tsuji, H., Ogiwara, M., Saha, S. K., & Sakaki, T. (2006). Enzymatic, Alkaline, and Autocatalytic Degradation of Poly(l-lactic acid):  Effects of Biaxial Orientation. Biomacromolecules, 7(1), 380-387. doi:10.1021/bm0507453He, Y., Wang, W., & Ding, J. (2013). Effects of L-lactic acid and D,L-lactic acid on viability and osteogenic differentiation of mesenchymal stem cells. Chinese Science Bulletin, 58(20), 2404-2411. doi:10.1007/s11434-013-5798-yM. Cantini C. González‐García V. Llopis‐Hernández M. Salmerón‐Sánchez T. Horbett J. L. Brash W. Norde Proteins at Interfaces III State of the Art ACS Symposium Series 2012 American Chemical Society Washington DC USA 471 496Llopis-Hernández, V., Rico, P., Moratal, D., Altankov, G., & Salmerón-Sánchez, M. (2013). Role of Material-Driven Fibronectin Fibrillogenesis in Protein Remodeling. BioResearch Open Access, 2(5), 364-373. doi:10.1089/biores.2013.0017Salmerón-Sánchez, M., Rico, P., Moratal, D., Lee, T. T., Schwarzbauer, J. E., & García, A. J. (2011). Role of material-driven fibronectin fibrillogenesis in cell differentiation. Biomaterials, 32(8), 2099-2105. doi:10.1016/j.biomaterials.2010.11.057Vanterpool, F. A., Cantini, M., Seib, F. P., & Salmerón-Sánchez, M. (2014). A Material-Based Platform to Modulate Fibronectin Activity and Focal Adhesion Assembly. BioResearch Open Access, 3(6), 286-296. doi:10.1089/biores.2014.0033Bathawab, F., Bennett, M., Cantini, M., Reboud, J., Dalby, M. J., & Salmerón-Sánchez, M. (2016). Lateral Chain Length in Polyalkyl Acrylates Determines the Mobility of Fibronectin at the Cell/Material Interface. Langmuir, 32(3), 800-809. doi:10.1021/acs.langmuir.5b03259Lozano Picazo, P., Pérez Garnes, M., Martínez Ramos, C., Vallés-Lluch, A., & Monleón Pradas, M. (2014). New Semi-Biodegradable Materials from Semi-Interpenetrated Networks of Poly(ϵ-caprolactone) and Poly(ethyl acrylate). Macromolecular Bioscience, 15(2), 229-240. doi:10.1002/mabi.201400331Schulz, A. S., Gojzewski, H., Huskens, J., Vos, W. L., & Julius Vancso, G. (2017). Controlled sub-10-nanometer poly(N -isopropyl-acrylamide) layers grafted from silicon by atom transfer radical polymerization. Polymers for Advanced Technologies, 29(2), 806-813. doi:10.1002/pat.4187Müllner, M., Dodds, S. J., Nguyen, T.-H., Senyschyn, D., Porter, C. J. H., Boyd, B. J., & Caruso, F. (2015). Size and Rigidity of Cylindrical Polymer Brushes Dictate Long Circulating Properties In Vivo. ACS Nano, 9(2), 1294-1304. doi:10.1021/nn505125fKreyling, W. G., Abdelmonem, A. M., Ali, Z., Alves, F., Geiser, M., Haberl, N., … Parak, W. J. (2015). In vivo integrity of polymer-coated gold nanoparticles. Nature Nanotechnology, 10(7), 619-623. doi:10.1038/nnano.2015.111Pankov, R. (2002). Fibronectin at a glance. Journal of Cell Science, 115(20), 3861-3863. doi:10.1242/jcs.00059Garcı́a, A. J., Vega, M. D., & Boettiger, D. (1999). Modulation of Cell Proliferation and Differentiation through Substrate-dependent Changes in Fibronectin Conformation. Molecular Biology of the Cell, 10(3), 785-798. doi:10.1091/mbc.10.3.785Gattazzo, F., Urciuolo, A., & Bonaldo, P. (2014). Extracellular matrix: A dynamic microenvironment for stem cell niche. Biochimica et Biophysica Acta (BBA) - General Subjects, 1840(8), 2506-2519. doi:10.1016/j.bbagen.2014.01.010Hay, J. J., Rodrigo-Navarro, A., Hassi, K., Moulisova, V., Dalby, M. J., & Salmeron-Sanchez, M. (2016). Living biointerfaces based on non-pathogenic bacteria support stem cell differentiation. Scientific Reports, 6(1). doi:10.1038/srep21809Zhu, Y., Gao, C., Liu, X., & Shen, J. (2002). Surface Modification of Polycaprolactone Membrane via Aminolysis and Biomacromolecule Immobilization for Promoting Cytocompatibility of Human Endothelial Cells. Biomacromolecules, 3(6), 1312-1319. doi:10.1021/bm020074yMacDonald, R. T., McCarthy, S. P., & Gross, R. A. (1996). Enzymatic Degradability of Poly(lactide):  Effects of Chain Stereochemistry and Material Crystallinity. Macromolecules, 29(23), 7356-7361. doi:10.1021/ma960513jTokiwa, Y., & Calabia, B. P. (2006). Biodegradability and biodegradation of poly(lactide). Applied Microbiology and Biotechnology, 72(2), 244-251. doi:10.1007/s00253-006-0488-1Hu, X., Su, T., Li, P., & Wang, Z. (2017). Blending modification of PBS/PLA and its enzymatic degradation. Polymer Bulletin, 75(2), 533-546. doi:10.1007/s00289-017-2054-7Gee, E. P. S., Yüksel, D., Stultz, C. M., & Ingber, D. E. (2013). SLLISWD Sequence in the 10FNIII Domain Initiates Fibronectin Fibrillogenesis. Journal of Biological Chemistry, 288(29), 21329-21340. doi:10.1074/jbc.m113.462077Roach, P., Eglin, D., Rohde, K., & Perry, C. C. (2007). Modern biomaterials: a review—bulk properties and implications of surface modifications. Journal of Materials Science: Materials in Medicine, 18(7), 1263-1277. doi:10.1007/s10856-006-0064-3Dalby, M. J., Gadegaard, N., & Oreffo, R. O. C. (2014). Harnessing nanotopography and integrin–matrix interactions to influence stem cell fate. Nature Materials, 13(6), 558-569. doi:10.1038/nmat3980Neděla, O., Slepička, P., & Švorčík, V. (2017). Surface Modification of Polymer Substrates for Biomedical Applications. Materials, 10(10), 1115. doi:10.3390/ma10101115Ngandu Mpoyi, E., Cantini, M., Reynolds, P. M., Gadegaard, N., Dalby, M. J., & Salmerón-Sánchez, M. (2016). Protein Adsorption as a Key Mediator in the Nanotopographical Control of Cell Behavior. ACS Nano, 10(7), 6638-6647. doi:10.1021/acsnano.6b01649Cantini, M., Rico, P., Moratal, D., & Salmerón-Sánchez, M. (2012). Controlled wettability, same chemistry: biological activity of plasma-polymerized coatings. Soft Matter, 8(20), 5575. doi:10.1039/c2sm25413aChu, P. (2002). Plasma-surface modification of biomaterials. Materials Science and Engineering: R: Reports, 36(5-6), 143-206. doi:10.1016/s0927-796x(02)00004-9Zoppe, J. O., Ataman, N. C., Mocny, P., Wang, J., Moraes, J., & Klok, H.-A. (2017). Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes. Chemical Reviews, 117(3), 1105-1318. doi:10.1021/acs.chemrev.6b00314Yasuda, H., & Yasuda, T. (2000). The competitive ablation and polymerization (CAP) principle and the plasma sensitivity of elements in plasma polymerization and treatment. Journal of Polymer Science Part A: Polymer Chemistry, 38(6), 943-953. doi:10.1002/(sici)1099-0518(20000315)38:63.0.co;2-3Ma, H., Textor, M., Clark, R. L., & Chilkoti, A. (2006). Monitoring kinetics of surface initiated atom transfer radical polymerization by quartz crystal microbalance with dissipation. Biointerphases, 1(1), 35-39. doi:10.1116/1.2190697Ohno, S., & Matyjaszewski, K. (2006). Controlling grafting density and side chain length in poly(n-butyl acrylate) by ATRP copolymerization of macromonomers. Journal of Polymer Science Part A: Polymer Chemistry, 44(19), 5454-5467. doi:10.1002/pola.21669Kang, C., Crockett, R. M., & Spencer, N. D. (2013). Molecular-Weight Determination of Polymer Brushes Generated by SI-ATRP on Flat Surfaces. Macromolecules, 47(1), 269-275. doi:10.1021/ma401951wXiao, D., & Wirth, M. J. (2002). Kinetics of Surface-Initiated Atom Transfer Radical Polymerization of Acrylamide on Silica. Macromolecules, 35(8), 2919-2925. doi:10.1021/ma011313xShinoda, H., & Matyjaszewski, K. (2001). Structural Control of Poly(Methyl Methacrylate)-g-poly(Lactic Acid) Graft Copolymers by Atom Transfer Radical Polymerization (ATRP). Macromolecules, 34(18), 6243-6248. doi:10.1021/ma0105791Xu, F. J., Zhao, J. P., Kang, E. T., & Neoh, K. G. (2007). Surface Functionalization of Polyimide Films via Chloromethylation and Surface-Initiated Atom Transfer Radical Polymerization. Industrial & Engineering Chemistry Research, 46(14), 4866-4873. doi:10.1021/ie0701367Zhou, T., Qi, H., Han, L., Barbash, D., & Li, C. Y. (2016). Towards controlled polymer brushes via a self-assembly-assisted-grafting-to approach. Nature Communications, 7(1). doi:10.1038/ncomms11119Guo, W., Zhu, J., Cheng, Z., Zhang, Z., & Zhu, X. (2011). Anticoagulant Surface of 316 L Stainless Steel Modified by Surface-Initiated Atom Transfer Radical Polymerization. ACS Applied Materials & Interfaces, 3(5), 1675-1680. doi:10.1021/am200215xIgnatova, M., Voccia, S., Gilbert, B., Markova, N., Mercuri, P. S., Galleni, M., … Jérôme, C. (2004). Synthesis of Copolymer Brushes Endowed with Adhesion to Stainless Steel Surfaces and Antibacterial Properties by Controlled Nitroxide-Mediated Radical Polymerization. Langmuir, 20(24), 10718-10726. doi:10.1021/la048347tTaran, E., Donose, B., Higashitani, K., Asandei, A. D., Scutaru, D., & Hurduc, N. (2006). ATRP grafting of styrene from benzyl chloride functionalized polysiloxanes: An AFM and TGA study of the Cu(0)/bpy catalyst. European Polymer Journal, 42(1), 119-125. doi:10.1016/j.eurpolymj.2005.06.030Liu, F., Du, C.-H., Zhu, B.-K., & Xu, Y.-Y. (2007). Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance. Polymer, 48(10), 2910-2918. doi:10.1016/j.polymer.2007.03.033Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011). Biomedical applications of biodegradable polymers. Journal of Polymer Science Part B: Polymer Physics, 49(12), 832-864. doi:10.1002/polb.22259Saito, E., Liao, E. E., Hu, W., Krebsbach, P. H., & Hollister, S. J. (2011). Effects of designed PLLA and 50:50 PLGA scaffold architectures on bone formation in vivo. Journal of Tissue Engineering and Regenerative Medicine, 7(2), 99-111. doi:10.1002/term.497Wang, Z., Wang, Y., Ito, Y., Zhang, P., & Chen, X. (2016). A comparative study on the in vivo degradation of poly(L-lactide) based composite implants for bone fracture fixation. Scientific Reports, 6(1). doi:10.1038/srep20770Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010). Biodegradable polymer matrix nanocomposites for tissue engineering: A review. Polymer Degradation and Stability, 95(11), 2126-2146. doi:10.1016/j.polymdegradstab.2010.06.007Cantini, M., Gomide, K., Moulisova, V., González-García, C., & Salmerón-Sánchez, M. (2017). Vitronectin as a Micromanager of Cell Response in Material-Driven Fibronectin Nanonetworks. Advanced Biosystems, 1(9), 1700047. doi:10.1002/adbi.201700047Pelta, J., Berry, H., Fadda, G. C., Pauthe, E., & Lairez, D. (2000). Statistical Conformation of Human Plasma Fibronectin. Biochemistry, 39(17), 5146-5154. doi:10.1021/bi992770xGugutkov, D., González-García, C., Rodríguez Hernández, J. C., Altankov, G., & Salmerón-Sánchez, M. (2009). Biological Activity of the Substrate-Induced Fibronectin Network: Insight into the Third Dimension through Electrospun Fibers. Langmuir, 25(18), 10893-10900. doi:10.1021/la9012203P. Rico Tortosa M. Cantini G. Altankov M. Salmeron‐Sanchez M. Monleón Pradas M. J. Vicent Polymers in Regenerative Medicine: Biomedical Applications from Nano‐ to Macro‐Structures 2014 John Wiley & Sons Inc Hoboken New Jersey 91 146Schwarzbauer, J. E., & DeSimone, D. W. (2011). Fibronectins, Their Fibrillogenesis, and In Vivo Functions. Cold Spring Harbor Perspectives in Biology, 3(7), a005041-a005041. doi:10.1101/cshperspect.a005041Martino, M. M., Tortelli, F., Mochizuki, M., Traub, S., Ben-David, D., Kuhn, G. A., … Hubbell, J. A. (2011). Engineering the Growth Factor Microenvironment with Fibronectin Domains to Promote Wound and Bone Tissue Healing. Science Translational Medicine, 3(100), 100ra89-100ra89. doi:10.1126/scitranslmed.3002614Keselowsky, B. G., Collard, D. M., & García, A. J. (2003). Surface chemistry modulates fibronectin conformation and directs integrin binding and specificity to control cell adhesion. Journal of Biomedical Materials Research Part A, 66A(2), 247-259. doi:10.1002/jbm.a.10537Keselowsky, B. G., Collard, D. M., & Garcı́a, A. J. (2004). Surface chemistry modulates focal adhesion composition and signaling through changes in integrin binding. Biomaterials, 25(28), 5947-5954. doi:10.1016/j.biomaterials.2004.01.062Keselowsky, B. G., Collard, D. M., & Garcia, A. J. (2005). Integrin binding specificity regulates biomaterial surface chemistry effects on cell differentiation. Proceedings of the National Academy of Sciences, 102(17), 5953-5957. doi:10.1073/pnas.0407356102Llopis-Hernández, V., Cantini, M., González-García, C., Cheng, Z. A., Yang, J., Tsimbouri, P. M., … Salmerón-Sánchez, M. (2016). Material-driven fibronectin assembly for high-efficiency presentation of growth factors. Science Advances, 2(8), e1600188. doi:10.1126/sciadv.1600188Ballester-Beltrán, J., Moratal, D., Lebourg, M., & Salmerón-Sánchez, M. (2014). Fibronectin-matrix sandwich-like microenvironments to manipulate cell fate. Biomater. Sci., 2(3), 381-389. doi:10.1039/c3bm60248fRedick, S. D., Settles, D. L., Briscoe, G., & Erickson, H. P. (2000). Defining Fibronectin’s Cell Adhesion Synergy Site by Site-Directed Mutagenesis. Journal of Cell Biology, 149(2), 521-527. doi:10.1083/jcb.149.2.521Tanaka, K., Sato, K., Yoshida, T., Fukuda, T., Hanamura, K., Kojima, N., … Watanabe, H. (2011). Evidence for cell density affecting C2C12 myogenesis: possible regulation of myogenesis by cell-cell communication. Muscle & Nerve, 44(6), 968-977. doi:10.1002/mus.22224Allingham, J. S., Smith, R., & Rayment, I. (2005). The structural basis of blebbistatin inhibition and specificity for myosin II. Nature Structural & Molecular Biology, 12(4), 378-379. doi:10.1038/nsmb908Kovács, M., Tóth, J., Hetényi, C., Málnási-Csizmadia, A., & Sellers, J. R. (2004). Mechanism of Blebbistatin Inhibition of Myosin II. Journal of Biological Chemistry, 279(34), 35557-35563. doi:10.1074/jbc.m405319200Cai, Y., Rossier, O., Gauthier, N. C., Biais, N., Fardin, M.-A., Zhang, X., … Sheetz, M. P. (2010). Cytoskeletal coherence requires myosin-IIA contractility. Journal of Cell Science, 123(3), 413-423. doi:10.1242/jcs.058297González-García, C., Moratal, D., Oreffo, R. O. C., Dalby, M. J., & Salmerón-Sánchez, M. (2012). Surface mobility regulates skeletal stem cell differentiation. Integrative Biology, 4(5), 531. doi:10.1039/c2ib00139jHorzum, U., Ozdil, B., & Pesen-Okvur, D. (2014). Step-by-step quantitative analysis of focal adhesions. MethodsX, 1, 56-59. doi:10.1016/j.mex.2014.06.004Selinummi, J., Seppälä, J., Yli-Harja, O., & Puhakka, J. A. (2005). Software for quantification of labeled bacteria from digital microscope images by automated image analysis. BioTechniques, 39(6), 859-863. doi:10.2144/000112018Leahy, D. J., Aukhil, I., & Erickson, H. P. (1996). 2.0 Å Crystal Structure of a Four-Domain Segment of Human Fibronectin Encompassing the RGD Loop and Synergy Region. Cell, 84(1), 155-164. doi:10.1016/s0092-8674(00)81002-

    Cross-protection against European swine influenza viruses in the context of infection immunity against the 2009 pandemic H1N1 virus : studies in the pig model of influenza

    Get PDF
    Pigs are natural hosts for the same influenza virus subtypes as humans and are a valuable model for cross-protection studies with influenza. In this study, we have used the pig model to examine the extent of virological protection between a) the 2009 pandemic H1N1 (pH1N1) virus and three different European H1 swine influenza virus (SIV) lineages, and b) these H1 viruses and a European H3N2 SIV. Pigs were inoculated intranasally with representative strains of each virus lineage with 6- and 17-week intervals between H1 inoculations and between H1 and H3 inoculations, respectively. Virus titers in nasal swabs and/or tissues of the respiratory tract were determined after each inoculation. There was substantial though differing cross-protection between pH1N1 and other H1 viruses, which was directly correlated with the relatedness in the viral hemagglutinin (HA) and neuraminidase (NA) proteins. Cross-protection against H3N2 was almost complete in pigs with immunity against H1N2, but was weak in H1N1/pH1N1-immune pigs. In conclusion, infection with a live, wild type influenza virus may offer substantial cross-lineage protection against viruses of the same HA and/or NA subtype. True heterosubtypic protection, in contrast, appears to be minimal in natural influenza virus hosts. We discuss our findings in the light of the zoonotic and pandemic risks of SIVs

    Uninvited Guests: Traditional Insect Repellents in Estonia used Against the Clothes Moth Tineola bisselliella, Human Flea Pulex irritons and Bedbug Cimex lectularius

    Get PDF
    Extensive folklore records from pre-modern Estonia give us an excellent opportunity to study a variety of local plant knowledge and plant use among the peasantry in various parts of the country. One important biocultural domain where plant knowledge has been crucial was in the various methods of combating different ectoparasites that cohabited and coexisted with humans and their domestic animals. Some of these methods were widely known (world-wide, Eurasia, Europe, Baltic Rim), while others were more local. Here we discuss ways of reducing clothes moths Tineola bisselliella (Hummel) (Lepidoptera: Tineidae), human fleas Pulex irritons L. (Siphonaptera: Pulicidae) and bedbugs Cimex lectularius L. (Hemiptera: Cimicidae) with the help of plants. Various taxa used as traditional repellents have been identified. The use of plants as repellents and their toxic principles are also discussed from a comparative perspective

    Revealing the last 13,500 years of environmental history from the multiproxy record of a mountain lake (Lago Enol, northern Iberian Peninsula)

    Get PDF
    This is the author's accepted manuscript. The final publication is available at Springer via http://dx.doi.org/10.1007/s10933-009-9387-7.We present the Holocene sequence from Lago Enol (43°16′N, 4°59′W, 1,070 m a.s.l.), Cantabrian Mountains, northern Spain. A multiproxy analysis provided comprehensive information about regional humidity and temperature changes. The analysis included sedimentological descriptions, physical properties, organic carbon and carbonate content, mineralogy and geochemical composition together with biological proxies including diatom and ostracod assemblages. A detailed pollen study enabled reconstruction of variations in vegetation cover, which were interpreted in the context of climate changes and human impact. Four distinct stages were recognized for the last 13,500 years: (1) a cold and dry episode that includes the Younger Dryas event (13,500–11,600 cal. year BP); (2) a humid and warmer period characterizing the onset of the Holocene (11,600–8,700 cal. year BP); (3) a tendency toward a drier climate during the middle Holocene (8,700–4,650 cal. year BP); and (4) a return to humid conditions following landscape modification by human activity (pastoral activities, deforestation) in the late Holocene (4,650–2,200 cal. year BP). Superimposed on relatively stable landscape conditions (e.g. maintenance of well established forests), the typical environmental variability of the southern European region is observed at this site.The Spanish Inter-Ministry Commission of Science and Technology (CICYT), the Spanish National Parks agency, the European Commission, the Spanish Ministry of Science, and the European Social Fund

    Revealing the last 13,500 years of environmental history from the multiproxy record of a mountain lake (Lago Enol, northern Iberian Peninsula)

    Get PDF
    This is the author's accepted manuscript. The final publication is available at Springer via http://dx.doi.org/10.1007/s10933-009-9387-7.We present the Holocene sequence from Lago Enol (43°16′N, 4°59′W, 1,070 m a.s.l.), Cantabrian Mountains, northern Spain. A multiproxy analysis provided comprehensive information about regional humidity and temperature changes. The analysis included sedimentological descriptions, physical properties, organic carbon and carbonate content, mineralogy and geochemical composition together with biological proxies including diatom and ostracod assemblages. A detailed pollen study enabled reconstruction of variations in vegetation cover, which were interpreted in the context of climate changes and human impact. Four distinct stages were recognized for the last 13,500 years: (1) a cold and dry episode that includes the Younger Dryas event (13,500–11,600 cal. year BP); (2) a humid and warmer period characterizing the onset of the Holocene (11,600–8,700 cal. year BP); (3) a tendency toward a drier climate during the middle Holocene (8,700–4,650 cal. year BP); and (4) a return to humid conditions following landscape modification by human activity (pastoral activities, deforestation) in the late Holocene (4,650–2,200 cal. year BP). Superimposed on relatively stable landscape conditions (e.g. maintenance of well established forests), the typical environmental variability of the southern European region is observed at this site.The Spanish Inter-Ministry Commission of Science and Technology (CICYT), the Spanish National Parks agency, the European Commission, the Spanish Ministry of Science, and the European Social Fund

    Search for the standard model Higgs boson at LEP

    Get PDF

    Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

    Get PDF
    The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

    Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

    Get PDF
    The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

    Elliptic flow of charged particles in Pb-Pb collisions at 2.76 TeV

    Get PDF
    We report the first measurement of charged particle elliptic flow in Pb-Pb collisions at 2.76 TeV with the ALICE detector at the CERN Large Hadron Collider. The measurement is performed in the central pseudorapidity region (|η\eta|<0.8) and transverse momentum range 0.2< pTp_{\rm T}< 5.0 GeV/cc. The elliptic flow signal v2_2, measured using the 4-particle correlation method, averaged over transverse momentum and pseudorapidity is 0.087 ±\pm 0.002 (stat) ±\pm 0.004 (syst) in the 40-50% centrality class. The differential elliptic flow v2(pT)_2(p_{\rm T}) reaches a maximum of 0.2 near pTp_{\rm T} = 3 GeV/cc. Compared to RHIC Au-Au collisions at 200 GeV, the elliptic flow increases by about 30%. Some hydrodynamic model predictions which include viscous corrections are in agreement with the observed increase.Comment: 10 pages, 4 captioned figures, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/389
    corecore