Glargine as a Basal Insulin Supplement in Recovering Critically Ill Patients - An In Silico Study

Tight glycaemic control is now benefiting medical and surgical intensive care patients by reducing complications associated with hyperglycaemia. Once patients leave this intensive care environment, less acute wards do not continue to provide the same level of glycaemic control. Main reason is that these less acute wards do not have the high levels of nursing resources to provide the same level of glycaemic control. Therefore developments in protocols that are less labour intensive are necessary. This study examines the use of insulin glargine for basal supplement in recovering critically ill patients. These patients represent a group who may benefit from such basal support therapy. In silico study results showed the potential in reducing nursing effort with the use of glargine. However, a protocol using only glargine for glucose control did not show to be effective in the simulated patients. This may be an indication that a protocol using only glargine is more suitable after discharge from critical care

Modeled Insulin Sensitivity and Interstitial Insulin Action from a Pilot Study of Dynamic Insulin Sensitivity Tests

An accurate test for insulin resistance can delay or prevent the development of Type 2 diabetes and its complications. The current gold standard test, CLAMP, is too labor intensive to be used in general practice. A recently developed dynamic insulin sensitivity test, DIST, uses a glucose-insulin-C-peptide model to calculate model-based insulin sensitivity, SI. Preliminary results show good correlation to CLAMP. However both CLAMP and DIST ignore saturation in insulin-mediated glucose removal. This study uses the data from 17 patients who underwent multiple DISTs to investigate interstitial insulin action and its influence on modeled insulin sensitivity. The critical parameters influencing interstitial insulin action are saturation in insulin receptor binding, αG, and plasma-interstitial difiusion rate, nI . Very low values of αG and very low values of nI produced the most intra-patient variability in SI. Repeatability in SI is enhanced with modeled insulin receptor saturation. Future parameter study on subjects with varying degree of insulin resistance may provide a better understanding of different contributing factors of insulin resistance

Development of a model-based clinical sepsis biomarker for critically ill patients

Invited. online 15 May 2010.Sepsis occurs frequently in the intensive care unit (ICU) and is a leading cause of admission, mortality, and cost. Treatment guidelines recommend early intervention, however positive blood culture results may take up to 48 h. Insulin sensitivity (SI) is known to decrease with worsening condition and could thus be used to aid diagnosis. Some glycemic control protocols are able to accurately identify insulin sensitivity in real-time. Hourly model-based insulin sensitivity SI values were calculated from glycemic control data of 36 patients with sepsis. The hourly SI is compared to the hourly sepsis score (ss) for these patients (ss = 0–4 for increasing severity). A multivariate clinical biomarker was also developed to maximize the discrimination between different ss groups. Receiver operator characteristic (ROC) curves for severe sepsis (ss=2) are created for both SI and the multivariate clinical biomarker. Insulin sensitivity as a sepsis biomarker for diagnosis of severe sepsis achieves a 50% sensitivity, 76% specificity, 4.8% positive predictive value (PPV), and 98.3% negative predictive value (NPV) at an SI cut-off value of 0.00013 L/mU/min. Multivariate clinical biomarker combining SI, temperature, heart rate, respiratory rate, blood pressure, and their respective hourly rates of change achieves 73% sensitivity, 80% specificity, 8.4% PPV, and 99.2% NPV. Thus, themultivariate clinical biomarker provides an effective real-time negative predictive diagnostic for severe sepsis. Examination of both inter- and intra-patient statistical distribution of this biomarker and sepsis score shows potential avenues to improve the positive predictive value

Physics of Solar Prominences: I - Spectral Diagnostics and Non-LTE Modelling

This review paper outlines background information and covers recent advances made via the analysis of spectra and images of prominence plasma and the increased sophistication of non-LTE (ie when there is a departure from Local Thermodynamic Equilibrium) radiative transfer models. We first describe the spectral inversion techniques that have been used to infer the plasma parameters important for the general properties of the prominence plasma in both its cool core and the hotter prominence-corona transition region. We also review studies devoted to the observation of bulk motions of the prominence plasma and to the determination of prominence mass. However, a simple inversion of spectroscopic data usually fails when the lines become optically thick at certain wavelengths. Therefore, complex non-LTE models become necessary. We thus present the basics of non-LTE radiative transfer theory and the associated multi-level radiative transfer problems. The main results of one- and two-dimensional models of the prominences and their fine-structures are presented. We then discuss the energy balance in various prominence models. Finally, we outline the outstanding observational and theoretical questions, and the directions for future progress in our understanding of solar prominences.Comment: 96 pages, 37 figures, Space Science Reviews. Some figures may have a better resolution in the published version. New version reflects minor changes brought after proof editin

Formation of dense partonic matter in relativistic nucleus-nucleus collisions at RHIC: Experimental evaluation by the PHENIX collaboration

Extensive experimental data from high-energy nucleus-nucleus collisions were recorded using the PHENIX detector at the Relativistic Heavy Ion Collider (RHIC). The comprehensive set of measurements from the first three years of RHIC operation includes charged particle multiplicities, transverse energy, yield ratios and spectra of identified hadrons in a wide range of transverse momenta (p_T), elliptic flow, two-particle correlations, non-statistical fluctuations, and suppression of particle production at high p_T. The results are examined with an emphasis on implications for the formation of a new state of dense matter. We find that the state of matter created at RHIC cannot be described in terms of ordinary color neutral hadrons.Comment: 510 authors, 127 pages text, 56 figures, 1 tables, LaTeX. Submitted to Nuclear Physics A as a regular article; v3 has minor changes in response to referee comments. Plain text data tables for the points plotted in figures for this and previous PHENIX publications are (or will be) publicly available at http://www.phenix.bnl.gov/papers.htm

Nanoscale waveguiding methods

While 32 nm lithography technology is on the horizon for integrated circuit (IC) fabrication, matching the pace for miniaturization with optics has been hampered by the diffraction limit. However, development of nanoscale components and guiding methods is burgeoning through advances in fabrication techniques and materials processing. As waveguiding presents the fundamental issue and cornerstone for ultra-high density photonic ICs, we examine the current state of methods in the field. Namely, plasmonic, metal slot and negative dielectric based waveguides as well as a few sub-micrometer techniques such as nanoribbons, high-index contrast and photonic crystals waveguides are investigated in terms of construction, transmission, and limitations. Furthermore, we discuss in detail quantum dot (QD) arrays as a gain-enabled and flexible means to transmit energy through straight paths and sharp bends. Modeling, fabrication and test results are provided and show that the QD waveguide may be effective as an alternate means to transfer light on sub-diffraction dimensions

Imaging-based clusters in current smokers of the COPD cohort associate with clinical characteristics: The SubPopulations and Intermediate Outcome Measures in COPD Study (SPIROMICS) 11 Medical and Health Sciences 1102 Cardiorespiratory Medicine and Haematology

Background: Classification of COPD is usually based on the severity of airflow, which may not sensitively differentiate subpopulations. Using a multiscale imaging-based cluster analysis (MICA), we aim to identify subpopulations for current smokers with COPD. Methods: Among the SPIROMICS subjects, we analyzed computed tomography images at total lung capacity (TLC) and residual volume (RV) of 284 current smokers. Functional variables were derived from registration of TLC and RV images, e.g. functional small airways disease (fSAD%). Structural variables were assessed at TLC images, e.g. emphysema and airway wall thickness and diameter. We employed an unsupervised method for clustering. Results: Four clusters were identified. Cluster 1 had relatively normal airway structures; Cluster 2 had an increase of fSAD% and wall thickness; Cluster 3 exhibited a further increase of fSAD% but a decrease of wall thickness and airway diameter; Cluster 4 had a significant increase of fSAD% and emphysema. Clinically, Cluster 1 showed normal FEV1/FVC and low exacerbations. Cluster 4 showed relatively low FEV1/FVC and high exacerbations. While Cluster 2 and Cluster 3 showed similar exacerbations, Cluster 2 had the highest BMI among all clusters. Conclusions: Association of imaging-based clusters with existing clinical metrics suggests the sensitivity of MICA in differentiating subpopulations

Imaging-based clusters in former smokers of the COPD cohort associate with clinical characteristics: The SubPopulations and intermediate outcome measures in COPD study (SPIROMICS)

Background: Quantitative computed tomographic (QCT) imaging-based metrics enable to quantify smoking induced disease alterations and to identify imaging-based clusters for current smokers. We aimed to derive clinically meaningful sub-groups of former smokers using dimensional reduction and clustering methods to develop a new way of COPD phenotyping. Methods: An imaging-based cluster analysis was performed for 406 former smokers with a comprehensive set of imaging metrics including 75 imaging-based metrics. They consisted of structural and functional variables at 10 segmental and 5 lobar locations. The structural variables included lung shape, branching angle, airway-circularity, airway-wall-thickness, airway diameter; the functional variables included regional ventilation, emphysema percentage, functional small airway disease percentage, Jacobian (volume change), anisotropic deformation index (directional preference in volume change), and tissue fractions at inspiration and expiration. Results: We derived four distinct imaging-based clusters as possible phenotypes with the sizes of 100, 80, 141, and 85, respectively. Cluster 1 subjects were asymptomatic and showed relatively normal airway structure and lung function except airway wall thickening and moderate emphysema. Cluster 2 subjects populated with obese females showed an increase of tissue fraction at inspiration, minimal emphysema, and the lowest progression rate of emphysema. Cluster 3 subjects populated with older males showed small airway narrowing and a decreased tissue fraction at expiration, both indicating air-trapping. Cluster 4 subjects populated with lean males were likely to be severe COPD subjects showing the highest progression rate of emphysema. Conclusions: QCT imaging-based metrics for former smokers allow for the derivation of statistically stable clusters associated with unique clinical characteristics. This approach helps better categorization of COPD sub-populations; suggesting possible quantitative structural and functional phenotypes