A numerical analysis of machining induced residual stresses of Grade 5 Titanium Alloy

In general most manufacturing techniques alter the surface integrity of the final component. Surface integrity refers to the surface properties and their influence on the functional performance of manufactured components1. Machining induced residual stress is a surface integrity descriptor that may have a significant influence on the mechanical behavior of metallic parts subjected to dynamic loads2. Most manufacturing processes introduce some form of residual stress to the material. Cutting or more specifically machining involves large plastic deformation and elevated temperatures that may induce significant residual stresses in the surface and near surface region. When turning steel these stresses are largely tensile in nature and extend to a depth of approximately 200 μm1

Gravity model improvement using GEOS-3 (GEM 9 and 10)

The use of collocation permitted GEM 9 to be a larger field than previous derived satellite models, GEM 9 having harmonics complete to 20 x 20 with selected higher degree terms. The satellite data set has approximately 840,000 observations, of which 200,000 are laser ranges taken on 9 satellites equipped with retroreflectors. GEM 10 is complete to 22 x 22 with selected higher degree terms out to degree and order 30 amounting to a total of 592 coefficients. Comparisons with surface gravity and altimeter data indicate a substantial improvement in GEM 9 over previous satellite solutions; GEM 9 is in even closer agreement with surface data than the previously published GEM 6 solution which contained surface gravity. In particular the free air gravity anomalies calculated from GEM 9 and a surface gravity solution are in excellent agreement for the high degree terms

On machinability of titanium grade 4 under minimum quantity lubrication assisted high speed machining

Abstract: The wonder metal Titanium and its alloys are prime candidate for various automotive, biomedical and aerospace applications due to their good strength-to-weight ratio, biocompatibility and corrosion resistance. Titanium and its alloys are known as difficult-to-machine materials i.e. their machining is challenging. The experimental work reported in the present paper attempts to enhance the machinability of Titanium Grade 4 under the influence of minimum quantity lubrication at high speed conditions. In this work a total of twenty seven experiments has been conducted based on full factorial design of experiment technique. Cutting speed, feed rate, and depth of cut are varied at three levels each and the values of important MQL parameters are fixed. The effects of machining parameters on surface roughness are discussed. Machining at optimum combination of parameters resulted in precision finish with maximum roughness value 2.16 μm and maximum tool flank wear value 0.201 mm. The research results reveal the superiority of MQL over conventional wet cooling to successfully machine Titanium Grade 4 at high speed conditions with sustainability

Estimating the changing disease burden attributable to smoking in South Africa for 2000, 2006 and 2012

Background. Ongoing quantification of the disease burden attributable to smoking is important to monitor and strengthen tobacco control policies. Objectives. To estimate the attributable burden due to smoking in South Africa for 2000, 2006 and 2012. Methods. We estimated attributable burden due to smoking for selected causes of death in South African (SA) adults aged ≥35 years for 2000, 2006 and 2012. We combined smoking prevalence results from 15 national surveys (1998 - 2017) and smoking impact ratios using national mortality rates. Relative risks between smoking and select causes of death were derived from local and international data. Results. Smoking prevalence declined from 25.0% in 1998 (40.5% in males, 10.9% in females) to 19.4% in 2012 (31.9% in males, 7.9% in females), but plateaued after 2010. In 2012 tobacco smoking caused an estimated 31 078 deaths (23 444 in males and 7 634 in females), accounting for 6.9% of total deaths of all ages (17.3% of deaths in adults aged ≥35 years), a 10.5% decline overall since 2000 (7% in males; 18% in females). Age-standardised mortality rates (and disability-adjusted life years (DALYs)) similarly declined in all population groups but remained high in the coloured population. Chronic obstructive pulmonary disease accounted for most tobacco-attributed deaths (6 373), followed by lung cancer (4 923), ischaemic heart disease (4 216), tuberculosis (2 326) and lower respiratory infections (1 950). The distribution of major causes of smoking-attributable deaths shows a middle- to high-income pattern in whites and Asians, and a middle- to low-income pattern in coloureds and black Africans. The role of infectious lung disease (TB and LRIs) has been underappreciated. These diseases comprised 21.0% of deaths among black Africans compared with only 4.3% among whites. It is concerning that smoking rates have plateaued since 2010. Conclusion. The gains achieved in reducing smoking prevalence in SA have been eroded since 2010. An increase in excise taxes is the most effective measure for reducing smoking prevalence. The advent of serious respiratory pandemics such as COVID-19 has increased the urgency of considering the role that smoking cessation/abstinence can play in the prevention of, and post-hospital recovery from, any condition

Patterns of paediatric end-of-life care: a chart review across different care settings in Switzerland.

Paediatric end-of-life care is challenging and requires a high level of professional expertise. It is important that healthcare teams have a thorough understanding of paediatric subspecialties and related knowledge of disease-specific aspects of paediatric end-of-life care. The aim of this study was to comprehensively describe, explore and compare current practices in paediatric end-of-life care in four distinct diagnostic groups across healthcare settings including all relevant levels of healthcare providers in Switzerland. In this nationwide retrospective chart review study, data from paediatric patients who died in the years 2011 or 2012 due to a cardiac, neurological or oncological condition, or during the neonatal period were collected in 13 hospitals, two long-term institutions and 10 community-based healthcare service providers throughout Switzerland. Ninety-three (62%) of the 149 reviewed patients died in intensive care units, 78 (84%) of them following withdrawal of life-sustaining treatment. Reliance on invasive medical interventions was prevalent, and the use of medication was high, with a median count of 12 different drugs during the last week of life. Patients experienced an average number of 6.42 symptoms. The prevalence of various types of symptoms differed significantly among the four diagnostic groups. Overall, our study patients stayed in the hospital for a median of six days during their last four weeks of life. Seventy-two patients (48%) stayed at home for at least one day and only half of those received community-based healthcare. The study provides a wide-ranging overview of current end-of-life care practices in a real-life setting of different healthcare providers. The inclusion of patients with all major diagnoses leading to disease- and prematurity-related childhood deaths, as well as comparisons across the diagnostic groups, provides additional insight and understanding for healthcare professionals. The provision of specialised palliative and end-of-life care services in Switzerland, including the capacity of community healthcare services, need to be expanded to meet the specific needs of seriously ill children and their families

The First Data Release of the Sloan Digital Sky Survey

The Sloan Digital Sky Survey has validated and made publicly available its First Data Release. This consists of 2099 square degrees of five-band (u, g, r, i, z) imaging data, 186,240 spectra of galaxies, quasars, stars and calibrating blank sky patches selected over 1360 square degrees of this area, and tables of measured parameters from these data. The imaging data go to a depth of r ~ 22.6 and are photometrically and astrometrically calibrated to 2% rms and 100 milli-arcsec rms per coordinate, respectively. The spectra cover the range 3800--9200 A, with a resolution of 1800--2100. Further characteristics of the data are described, as are the data products themselves.Comment: Submitted to The Astronomical Journal. 16 pages. For associated documentation, see http://www.sdss.org/dr

Geographical and temporal distribution of SARS-CoV-2 clades in the WHO European Region, January to June 2020

We show the distribution of SARS-CoV-2 genetic clades over time and between countries and outline potential genomic surveillance objectives. We applied three available genomic nomenclature systems for SARS-CoV-2 to all sequence data from the WHO European Region available during the COVID-19 pandemic until 10 July 2020. We highlight the importance of real-time sequencing and data dissemination in a pandemic situation. We provide a comparison of the nomenclatures and lay a foundation for future European genomic surveillance of SARS-CoV-2.Peer reviewe

Benign external hydrocephalus: a review, with emphasis on management

Benign external hydrocephalus in infants, characterized by macrocephaly and typical neuroimaging findings, is considered as a self-limiting condition and is therefore rarely treated. This review concerns all aspects of this condition: etiology, neuroimaging, symptoms and clinical findings, treatment, and outcome, with emphasis on management. The review is based on a systematic search in the Pubmed and Web of Science databases. The search covered various forms of hydrocephalus, extracerebral fluid, and macrocephaly. Studies reporting small children with idiopathic external hydrocephalus were included, mostly focusing on the studies reporting a long-term outcome. A total of 147 studies are included, the majority however with a limited methodological quality. Several theories regarding pathophysiology and various symptoms, signs, and clinical findings underscore the heterogeneity of the condition. Neuroimaging is important in the differentiation between external hydrocephalus and similar conditions. A transient delay of psychomotor development is commonly seen during childhood. A long-term outcome is scarcely reported, and the results are varying. Although most children with external hydrocephalus seem to do well both initially and in the long term, a substantial number of patients show temporary or permanent psychomotor delay. To verify that this truly is a benign condition, we suggest that future research on external hydrocephalus should focus on the long-term effects of surgical treatment as opposed to conservative management