Determining research knowledge infrastructure for healthcare systems: a qualitative study

<p>Abstract</p> <p>Background</p> <p>This study examines research knowledge infrastructures (RKIs) found in health systems. An RKI is defined as any instrument (<it>i.e</it>., programs, interventions, tools) implemented in order to facilitate access, dissemination, exchange, and/or use of evidence in healthcare organisations. Based on an environmental scan (17 key informant interviews) and scoping review (26 studies), we found support for a framework that we developed that outlines components that a health system can have in its RKI. The broad domains are climate for research use, research production, activities used to link research to action, and evaluation.</p> <p>The objective of the current study is to profile the RKI of three types of health system organisations--regional health authorities, primary care practices, and hospitals--in two Canadian provinces to determine the current mix of components these organisations have in their RKI, their experience with these components, and their views about future RKI initiatives.</p> <p>Methods</p> <p>This study will include semistructured telephone interviews with a purposive sample region of a senior management team member, library/resource centre manager, and a 'knowledge broker' in three regional health authorities, five or six purposively sampled hospitals, and five or six primary care practices in Ontario and Quebec, for a maximum of 71 interviewees. The interviews will explore (a) which RKI components have proven helpful, (b) barriers and facilitators in implementing RKI components, and (c) views about next steps in further development of RKIs.</p> <p>Discussion</p> <p>This is the first qualitative examination of potential RKI efforts that can increase the use of research evidence in health system decision making. We anticipate being able to identify broadly applicable insights about important next steps in building effective RKIs. Some of the identified RKI components may increase the use of research evidence by decision makers, which may then lead to more informed decisions.</p

Covalently interconnected transition metal dichalcogenide networks via defect engineering for high-performance electronic devices.

Solution-processed semiconducting transition metal dichalcogenides are at the centre of an ever-increasing research effort in printed (opto)electronics. However, device performance is limited by structural defects resulting from the exfoliation process and poor inter-flake electronic connectivity. Here, we report a new molecular strategy to boost the electrical performance of transition metal dichalcogenide-based devices via the use of dithiolated conjugated molecules, to simultaneously heal sulfur vacancies in solution-processed transition metal disulfides and covalently bridge adjacent flakes, thereby promoting percolation pathways for the charge transport. We achieve a reproducible increase by one order of magnitude in field-effect mobility (µFE), current ratio (ION/IOFF) and switching time (τS) for liquid-gated transistors, reaching 10-2 cm2 V-1 s-1, 104 and 18 ms, respectively. Our functionalization strategy is a universal route to simultaneously enhance the electronic connectivity in transition metal disulfide networks and tailor on demand their physicochemical properties according to the envisioned applications.European Commission through the Graphene Flagship, the ERC Grants SUPRA2DMAT (GA-833707), FUTURE-PRINT (GA-694101), Hetero2D, GSYNCOR, the EU Grant Neurofibres, the Agence Nationale de la Recherche through the Labex projects CSC (ANR-10-LABX-0026 CSC) and NIE (ANR-11-LABX-0058 NIE) within the Investissement d’Avenir program (ANR-10-120 IDEX-0002-02), the International Center for Frontier Research in Chemistry (icFRC), EPSRC Grants EP/K01711X/1, EP/K017144/1, EP/N010345/1, EP/L016057/1, and the Faraday Institution. The HAADF-STEM characterization was carried out in the Advanced Microscopy Laboratory (Dublin), a Science Foundation Ireland (SFI) supported centre

Hierarchical Bayesian level set inversion

The level set approach has proven widely successful in the study of inverse problems for inter- faces, since its systematic development in the 1990s. Re- cently it has been employed in the context of Bayesian inversion, allowing for the quantification of uncertainty within the reconstruction of interfaces. However the Bayesian approach is very sensitive to the length and amplitude scales in the prior probabilistic model. This paper demonstrates how the scale-sensitivity can be cir- cumvented by means of a hierarchical approach, using a single scalar parameter. Together with careful con- sideration of the development of algorithms which en- code probability measure equivalences as the hierar- chical parameter is varied, this leads to well-defined Gibbs based MCMC methods found by alternating Metropolis-Hastings updates of the level set function and the hierarchical parameter. These methods demon- strably outperform non-hierarchical Bayesian level set methods

Genetic correlations between diabetes and glaucoma: an analysis of continuous and dichotomous phenotypes

Purpose: A genetic correlation is the proportion of phenotypic variance between traits that is shared on a genetic basis. Here we explore genetic correlations between diabetes- and glaucoma-related traits.Design: Cross-sectional study.Methods: We assembled genome-wide association study summary statistics from European-derived participants regarding diabetes-related traits like fasting blood sugar (FBS) and type 2 diabetes (T2D) and glaucoma-related traits (intraocular pressure (IOP), central corneal thickness (CCT), corneal hysteresis (CH), corneal resistance factor (CRF), cup-disc ratio (CDR), and primary open-angle glaucoma (POAG)). We included data from the National Eye Institute Glaucoma Human Genetics Collaboration Heritable Overall Operational Database, the UK Biobank and the International Glaucoma Genetics Consortium. We calculated genetic correlation (rg) between traits using linkage disequilibrium score regression. We also calculated genetic correlations between IOP, CCT and selected diabetes-related traits based on individual level phenotype data in two Northern European population-based samples using pedigree information and Sequential Oligogenic Linkage Analysis Routines (SOLAR).Results: Overall, there was little rg between diabetes- and glaucoma-related traits. Specifically, we found a non-significant negative correlation between T2D and POAG (rg=-0.14; p=0.16). Using SOLAR, the genetic correlations between measured IOP, CCT, FBS, fasting insulin and hemoglobin A1c, were null. In contrast, genetic correlations between IOP and POAG (rg ≥0.45; p≤3.0E-04) and between CDR and POAG were high (rg =0.57; p=2.8E-10). However, genetic correlations between corneal properties (CCT, CRF and CH) and POAG were low (rg range: -0.18 - 0.11) and non-significant (p≥0.07).Conclusion: These analyses suggest there is limited genetic correlation between diabetes- and glaucoma-related traits

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

X-ray emission from the Sombrero galaxy: discrete sources

We present a study of discrete X-ray sources in and around the bulge-dominated, massive Sa galaxy, Sombrero (M104), based on new and archival Chandra observations with a total exposure of ~200 ks. With a detection limit of L_X = 1E37 erg/s and a field of view covering a galactocentric radius of ~30 kpc (11.5 arcminute), 383 sources are detected. Cross-correlation with Spitler et al.'s catalogue of Sombrero globular clusters (GCs) identified from HST/ACS observations reveals 41 X-rays sources in GCs, presumably low-mass X-ray binaries (LMXBs). We quantify the differential luminosity functions (LFs) for both the detected GC and field LMXBs, whose power-low indices (~1.1 for the GC-LF and ~1.6 for field-LF) are consistent with previous studies for elliptical galaxies. With precise sky positions of the GCs without a detected X-ray source, we further quantify, through a fluctuation analysis, the GC LF at fainter luminosities down to 1E35 erg/s. The derived index rules out a faint-end slope flatter than 1.1 at a 2 sigma significance, contrary to recent findings in several elliptical galaxies and the bulge of M31. On the other hand, the 2-6 keV unresolved emission places a tight constraint on the field LF, implying a flattened index of ~1.0 below 1E37 erg/s. We also detect 101 sources in the halo of Sombrero. The presence of these sources cannot be interpreted as galactic LMXBs whose spatial distribution empirically follows the starlight. Their number is also higher than the expected number of cosmic AGNs (52+/-11 [1 sigma]) whose surface density is constrained by deep X-ray surveys. We suggest that either the cosmic X-ray background is unusually high in the direction of Sombrero, or a distinct population of X-ray sources is present in the halo of Sombrero.Comment: 11 figures, 5 tables, ApJ in pres

Statistical regularities in the rank-citation profile of scientists

Recent science of science research shows that scientific impact measures for journals and individual articles have quantifiable regularities across both time and discipline. However, little is known about the scientific impact distribution at the scale of an individual scientist. We analyze the aggregate production and impact using the rank-citation profile ci(r) of 200 distinguished professors and 100 assistant professors. For the entire range of paper rank r, we fit each ci(r) to a common distribution function. Since two scientists with equivalent Hirsch h-index can have significantly different ci(r) profiles, our results demonstrate the utility of the βi scaling parameter in conjunction with hi for quantifying individual publication impact. We show that the total number of citations Ci tallied from a scientist's Ni papers scales as . Such statistical regularities in the input-output patterns of scientists can be used as benchmarks for theoretical models of career progress

Azimuthal anisotropy of charged particles at high transverse momenta in PbPb collisions at sqrt(s[NN]) = 2.76 TeV

The azimuthal anisotropy of charged particles in PbPb collisions at nucleon-nucleon center-of-mass energy of 2.76 TeV is measured with the CMS detector at the LHC over an extended transverse momentum (pt) range up to approximately 60 GeV. The data cover both the low-pt region associated with hydrodynamic flow phenomena and the high-pt region where the anisotropies may reflect the path-length dependence of parton energy loss in the created medium. The anisotropy parameter (v2) of the particles is extracted by correlating charged tracks with respect to the event-plane reconstructed by using the energy deposited in forward-angle calorimeters. For the six bins of collision centrality studied, spanning the range of 0-60% most-central events, the observed v2 values are found to first increase with pt, reaching a maximum around pt = 3 GeV, and then to gradually decrease to almost zero, with the decline persisting up to at least pt = 40 GeV over the full centrality range measured.Comment: Replaced with published version. Added journal reference and DO

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns