Experimental study and modeling of rheological and mechanical properties of NHL grouts

The support from the strategic project Pest-C/CTM/LA0025/2011This paper aims to model the effect of grout composition on properties of two natural hydraulic lime (NHL) grouts based on the correlation between grout rheometer results and simple flow tests. First, the effects of water:binder ratio and superplasticizer dosage on its rheological properties and flowability were analyzed. Dosage of superplasticizer and water:binder ratio were varied from 0.6 to 1.2% (by mass of binder) and 0.45-0.55, respectively. A good correlation between classical flow tests and the rheological properties was obtained. Then, statistical models were formulated in order to estimating the grout parameters, such as plastic viscosity and yield stress just by performing simple flow tests. The models coefficients were calculated using multiple regression analysis. The statistical modeling results indicated that the properties of the grouts studied are linearly related to water:binder ratio, superplasticizer dosage, and specific surface area of natural hydraulic limes. Finally, the accuracy of the models was experimentally confirmed using random grout compositions. The predicted-to-measured ratio ranged from 0.97 to 1.08, indicating a good agreement between the confirmation results and the expected results from the statistical models.authorsversionpublishe

Effects of polypropylene fibers and measurement methods on the yield stress of grouts for the consolidation of heritage masonry walls

FeDeR funds through the COMPeTe 2020 Programme under the project number POCI-01-0145-FeDeR-007688.The injection of grouts is a consolidation technique suitable for overcoming the structural deterioration of old stone masonry walls. Grouting operations involve introducing a suspension (grout) into a masonry core with the aim of improving the load capacity of the wall, as well as reducing its brittle mechanisms. The yield stress of injection grouts will affect the injection pressure and their flow inside the masonry. However, the determination of some rheological properties such as yield stress in hydraulic grout is challenging, due to the combined effects of hydration reactions and interactions between the particles present in the suspension. In this study, the determination of the yield stress of natural hydraulic lime-based grouts with polypropylene fibers was carried out. The changes in yield stress with time, fibers content and hydration were evaluated by two measurement methods using a rotational rheometer. Additionally, the static and dynamic yield stress as well as the critical shear-strain rate were determined, which provided useful information on the grout design in order to achieve successful grouting operations.publishersversionpublishe

O papel da investigação no estudo das argamassas de substituição na conservação do património

Revista Engenharia Civil, nº 31 (Maio 2008), p. 29-37As argamassas desempenham um papel fundamental na conservação do património edificado. Embora o conceito de argamassas de substituição não seja recente, a disponibilidade de materiais que existe na actualidade, para além dos tradicionais, pode apresentar novas oportunidades e criar alguns desafios de difícil resolução que têm de ser analisados criteriosamente de um ponto de vista científico. Este artigo descreve e analisa alguns dos requisitos subjacentes às argamassas de substituição, discute as dificuldades que podem surgir e enfatiza algumas abordagens recentes que devem ser consideradas a nível da investigação internacional

Retrofitting Historic Buildings for Future Climatic Conditions and Consequences in Terms of Artifacts Conservation Using Hygrothermal Building Simulation

Funding Information: The first author acknowledges the FCT—Fundação para Ciência e a Tecnologia—for the financial support through the Ph.D. scholarship PD/BD/127844/2016. This work was financially supported by: UID/ECI/04708/2019- CONSTRUCT—Instituto de I&D em Estruturas e Construções funded by national funds through the FCT/MCTES (PIDDAC). The APC was funded by open access funds from Oslo Metropolitan University (OsloMet). Publisher Copyright: © 2023 by the authors.Climate change will greatly influence the world at several levels and will have consequences on the interior climate of historic buildings and artifacts conservation. Buildings are responsible for a large slice of the overall emissions, which is due both to the greenhouse gases that are released during their construction as well as the activities that are performed therewithin. One way of counteracting this trend is to design more efficient retrofit buildings and predict their behavior using simulation software, which can thoroughly assess the performance of new buildings or the impact of each retrofit measure for existing buildings. In this study, a calibrated computational model of high thermal inertia building was used to assess the performance of passive retrofits in mitigating the effects of climate change concerning artifact decay mechanisms. In addition, a methodology that aims to reduce the amount of time spent to perform these studies is also presented, in which time savings reach up to 63%.publishersversionpublishe

Contribution to the design of hydraulic lime-based grouts for masonry consolidation

Grout is a concentrated suspension that can be employed for the homogenisation and consolidation of systems presenting pores, voids and cracks, such as inner core of old stone masonries. A grout should be well conceived, taking into account the optimisation of its performance; this means that simple binder and water formulations prove to be inadequate. Hence, the effect of different admixtures and pozzolans, which are traditionally used in concrete, on the fresh and hardened properties of hydraulic lime grouts, were investigated. Hydraulic lime binder plays a role of great importance in the rehabilitation of historic structures, due to its compatibility with pre-existing materials, like mortars. However, hardly any information is presently known regarding the effect of these materials on the behaviour of hydraulic lime grouts. The improvement of their properties through the use of these products is still an open field. Hence, and as a first step, the prediction of grout properties in a laboratory setting were made. The results summarised in this paper are part of a large research project and precede the fine tuning of grout composition according to the characteristics of the masonry to which such a grout is to be injected

Safety and Health at Work: Assessment tool- Bakery/Pastry Products

This manual aims to assist the Work Health and Safety Assessment Tool – Bread/Pastry Products user, in carrying out a simplified and easy-to-use occupational risk assessment with a view to adopting risk control solutions at workplaces. The design of this tool trie to provide an instrument capable of being used without internet access or specific software installation. In addition to its main purpose, this tool can also be used for workers consultation or training actions, provided as a complement of the other instruments developed within the scope of this project. The tool is organized in three distinct parts (see Figure 1): the first, where a checklist is filled out, from which a graphical overview is obtained, which will give the overview of the level of risk control (second part). This synthesis of results allows the user to immediately visualize the level of control of the main risks and in which will have to make major interventions. Finally, the third part appears, where a report is generated with solutions, particularized for each one of the risks in which the adoption of measures proves necessary.info:eu-repo/semantics/publishedVersio

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011