173 research outputs found
Handheld X-Ray Fluorescence Analysis (HH-XRF): a non-destructive tool for distinguishing sandstones in historic structures
Determining the provenance of building stone can be important when researching the
history of historic structures or identifying suitable substitute stone to use in building
repairs. Commonly, however, there is no written record of stone source, and a visual
examination alone is inconclusive. In many such situations stone provenance can only be
constrained with confidence if the stone has a distinctive property or character that allows it
to be distinguished from, or matched with, other stones. A small proportion of stones have
one or more genuinely distinctive visual characteristics that uniquely confirm their
provenance, but for most stones such distinctive properties, if they exist at all, are cryptic
and usually revealed only by microscope examination or bulk chemical analysis. However,
collecting and analysing representative hand samples for this purpose can be difficult, timeconsuming
and damaging to historic structures. Handheld X-Ray Fluorescence analysis
offers the potential to provide bulk composition data without the need to collect physical
samples. HH-XRF instruments are lightweight, wireless and portable, and they provide a
rapid, non-destructive means of analysing most materials in a wide range of settings. This
study has examined the benefits and limitations of the instrument when applied to
sandstone building stones from the UK. A programme of laboratory tests has been used to:
develop a robust methodology for gathering, managing, displaying and interpreting data;
determining the extent to which sample surface condition affects the analytical results; and
assessing the degree to which different sandstones can be distinguished on the basis of their
bulk composition. The results are promising: the data can be used to compare, distinguish
and match visually indistinguishable sandstones (and potentially a wide range of other
geological and man-made materials) quickly and easily, and as such the method should find
widespread application in disciplines such as building conservation and archaeology
Handheld x-Ray fluorescence : a method for non-destructive compositional analysis of sandstone building stones
This report describes a study designed to devise an appropriate methodology for using a Handheld X-Ray Fluorescence (HH-XRF) instrument for in situ testing of sandstone building stones. HH-XRF is a non-destructive method of compositional analysis that could offer the means to geochemically differentiate different sandstones, and constrain their quarry sources.
To examine the potential of HH-XRF for these purposes, a programme of laboratory tests has been conducted on a range of sandstone building stones from the UK. The aims of the test programme were to: develop and refine a robust and fit-for-purpose methodology for gathering, managing, displaying and interpreting compositional data; determine the extent to which sample surface condition and stone texture affect the results; and evaluate whether or not the results can provide a basis for distinguishing different sandstones.
The results suggest the instrument can be used to distinguish sandstones (and potentially a wide range of other geological and man-made materials) that are otherwise indistinguishable in the field, and as such the method should find widespread application in disciplines such as building conservation and archaeology
Soil metal/metalloid concentrations in the Clyde Basin, Scotland, UK: implications for land quality
An assessment of topsoil (5â20cm) metal/metalloid (hereafter referred to as metal) concentrations across Glasgow and the Clyde Basin reveals that copper, molybdenum, nickel, lead, antimony and zinc show the greatest enrichment in urban versus rural topsoil (elevated 1.7â2.1 times; based on median values). This is a typical indicator suite of urban pollution also found in other cities. Similarly, arsenic, cadmium and lead are elevated 3.2â4.3 times the rural background concentrations in topsoil from the former Leadhills mining area. Moorlands show typical organic-soil geochemical signatures, with significantly lower (P<0.05) concentrations of geogenic elements such as chromium, copper, nickel, molybdenum and zinc, but higher levels of cadmium, lead and selenium than most other land uses due to atmospheric deposition/trapping of these substances in peat. In farmland, 14% of nickel and 7% of zinc in topsoil samples exceed agricultural maximum admissible concentrations, and may be sensitive to sewage-sludge application. Conversely, 5% of copper, 17% of selenium and 96% of pH in farmland topsoil samples are below recommended agricultural production thresholds. Significant proportions of topsoil samples exceed the most precautionary (residential/allotment) human-exposure soil guidelines for chromium (18% urban; 10% rural), lead (76% urban; 45% rural) and vanadium (87% urban; 56% rural). For chromium, this reflects volcanic bedrock and the history of chromite ore processing in the region. However, very few soil types are likely to exceed new chromiumVI-based guidelines. The number of topsoil samples exceeding the guidelines for lead and vanadium highlight the need for further investigations and evidence to improve human soil-exposure risk assessments to better inform land contamination policy and regeneration
UK Geoenergy Observatories, Glasgow environmental baseline soil chemistry dataset
This report describes the environmental baseline topsoil chemistry dataset collected in February-March 2018 (03-18) as part of the United Kingdom Geoenergy Observatories (UKGEOS) project. Ninety, samples were collected from the shallow coal-mine Glasgow Geothermal Energy Research Field Site (GGERFS). The report accompanies the GGERFS Soil Chemistry03-18 dataset. It provides valuable information on soil chemistry prior to installation of the GGERFS-facility boreholes, against which any future change during the development/ running of the facility can be assessed. This information is necessary to help understand and de-risk similar shallow geothermal schemes in the future, provide public reassurance, and inform sustainable energy policy
Controls on surface water quality in the River Clyde catchment, Scotland, UK, with particular reference to chromium and lead
Three collated geochemical surveys of surface water in the Clyde catchment have established the spatial variability in water composition, primarily under baseflow conditions. The waters are broadly pH-neutral to alkaline (maximum pH 8.7) in the lowlands, but mildly acidic in uplands on the catchment periphery. Electrical conductance is relatively high in lowland streams (maximum 8320ÎźgLâ1), with lower values in the uplands. Dissolved chromium (Cr; 5ÎźgLâ1) are recorded in urban areas associated with the disposal of alkaline industrial chromite ore processing residue. Under such conditions, Cr probably occurs as Cr(VI). Numerous relatively high Pb values occur in the upland and urban areas. These are likely to be associated with a combination of soil reactions, diffuse pollution and contamination from Pb mineralisation/mining. Pb has a stronger correlation with water pH than with stream sediment Pb content, suggesting that pH has a greater control on Pb mobility than host-rock Pb. Exceedances of water-quality standards are <1% for both Cr and Pb across the catchment. Absolute exceedances are more extreme for Cr than for Pb, highlighting the scale of the Cr pollution problem for urban surface water within the catchment
Environment-Induced Decoherence and the Transition From Quantum to Classical
We study dynamics of quantum open systems, paying special attention to those
aspects of their evolution which are relevant to the transition from quantum to
classical. We begin with a discussion of the conditional dynamics of simple
systems. The resulting models are straightforward but suffice to illustrate
basic physical ideas behind quantum measurements and decoherence. To discuss
decoherence and environment-induced superselection einselection in a more
general setting, we sketch perturbative as well as exact derivations of several
master equations valid for various systems. Using these equations we study
einselection employing the general strategy of the predictability sieve.
Assumptions that are usually made in the discussion of decoherence are
critically reexamined along with the ``standard lore'' to which they lead.
Restoration of quantum-classical correspondence in systems that are classically
chaotic is discussed. The dynamical second law -it is shown- can be traced to
the same phenomena that allow for the restoration of the correspondence
principle in decohering chaotic systems (where it is otherwise lost on a very
short time-scale). Quantum error correction is discussed as an example of an
anti-decoherence strategy. Implications of decoherence and einselection for the
interpretation of quantum theory are briefly pointed out.Comment: 80 pages, 7 figures included, Lectures given by both authors at the
72nd Les Houches Summer School on "Coherent Matter Waves", July-August 199
Search for a W' boson decaying to a bottom quark and a top quark in pp collisions at sqrt(s) = 7 TeV
Results are presented from a search for a W' boson using a dataset
corresponding to 5.0 inverse femtobarns of integrated luminosity collected
during 2011 by the CMS experiment at the LHC in pp collisions at sqrt(s)=7 TeV.
The W' boson is modeled as a heavy W boson, but different scenarios for the
couplings to fermions are considered, involving both left-handed and
right-handed chiral projections of the fermions, as well as an arbitrary
mixture of the two. The search is performed in the decay channel W' to t b,
leading to a final state signature with a single lepton (e, mu), missing
transverse energy, and jets, at least one of which is tagged as a b-jet. A W'
boson that couples to fermions with the same coupling constant as the W, but to
the right-handed rather than left-handed chiral projections, is excluded for
masses below 1.85 TeV at the 95% confidence level. For the first time using LHC
data, constraints on the W' gauge coupling for a set of left- and right-handed
coupling combinations have been placed. These results represent a significant
improvement over previously published limits.Comment: Submitted to Physics Letters B. Replaced with version publishe
Search for the standard model Higgs boson decaying into two photons in pp collisions at sqrt(s)=7 TeV
A search for a Higgs boson decaying into two photons is described. The
analysis is performed using a dataset recorded by the CMS experiment at the LHC
from pp collisions at a centre-of-mass energy of 7 TeV, which corresponds to an
integrated luminosity of 4.8 inverse femtobarns. Limits are set on the cross
section of the standard model Higgs boson decaying to two photons. The expected
exclusion limit at 95% confidence level is between 1.4 and 2.4 times the
standard model cross section in the mass range between 110 and 150 GeV. The
analysis of the data excludes, at 95% confidence level, the standard model
Higgs boson decaying into two photons in the mass range 128 to 132 GeV. The
largest excess of events above the expected standard model background is
observed for a Higgs boson mass hypothesis of 124 GeV with a local significance
of 3.1 sigma. The global significance of observing an excess with a local
significance greater than 3.1 sigma anywhere in the search range 110-150 GeV is
estimated to be 1.8 sigma. More data are required to ascertain the origin of
this excess.Comment: Submitted to Physics Letters
Measurement of the Lambda(b) cross section and the anti-Lambda(b) to Lambda(b) ratio with Lambda(b) to J/Psi Lambda decays in pp collisions at sqrt(s) = 7 TeV
The Lambda(b) differential production cross section and the cross section
ratio anti-Lambda(b)/Lambda(b) are measured as functions of transverse momentum
pt(Lambda(b)) and rapidity abs(y(Lambda(b))) in pp collisions at sqrt(s) = 7
TeV using data collected by the CMS experiment at the LHC. The measurements are
based on Lambda(b) decays reconstructed in the exclusive final state J/Psi
Lambda, with the subsequent decays J/Psi to an opposite-sign muon pair and
Lambda to proton pion, using a data sample corresponding to an integrated
luminosity of 1.9 inverse femtobarns. The product of the cross section times
the branching ratio for Lambda(b) to J/Psi Lambda versus pt(Lambda(b)) falls
faster than that of b mesons. The measured value of the cross section times the
branching ratio for pt(Lambda(b)) > 10 GeV and abs(y(Lambda(b))) < 2.0 is 1.06
+/- 0.06 +/- 0.12 nb, and the integrated cross section ratio for
anti-Lambda(b)/Lambda(b) is 1.02 +/- 0.07 +/- 0.09, where the uncertainties are
statistical and systematic, respectively.Comment: Submitted to Physics Letters
Search for new physics in events with opposite-sign leptons, jets, and missing transverse energy in pp collisions at sqrt(s) = 7 TeV
A search is presented for physics beyond the standard model (BSM) in final
states with a pair of opposite-sign isolated leptons accompanied by jets and
missing transverse energy. The search uses LHC data recorded at a
center-of-mass energy sqrt(s) = 7 TeV with the CMS detector, corresponding to
an integrated luminosity of approximately 5 inverse femtobarns. Two
complementary search strategies are employed. The first probes models with a
specific dilepton production mechanism that leads to a characteristic kinematic
edge in the dilepton mass distribution. The second strategy probes models of
dilepton production with heavy, colored objects that decay to final states
including invisible particles, leading to very large hadronic activity and
missing transverse energy. No evidence for an event yield in excess of the
standard model expectations is found. Upper limits on the BSM contributions to
the signal regions are deduced from the results, which are used to exclude a
region of the parameter space of the constrained minimal supersymmetric
extension of the standard model. Additional information related to detector
efficiencies and response is provided to allow testing specific models of BSM
physics not considered in this paper.Comment: Replaced with published version. Added journal reference and DO
- âŚ