942 research outputs found
Transillumination imaging through biological tissue by single-pixel detection
One challenge that has long held the attention of scientists is that of clearly seeing objects hidden by turbid media, as smoke, fog or biological tissue, which has major implications in fields such as remote sensing or early diagnosis of diseases. Here, we combine structured incoherent illumination and bucket detection for imaging an absorbing object completely embedded in a scattering medium. A sequence of low-intensity microstructured light patterns is launched onto the object, whose image is accurately reconstructed through the light fluctuations measured by a single-pixel detector. Our technique is noninvasive, does not require coherent sources, raster scanning nor time-gated detection and benefits from the compressive sensing strategy. As a proof of concept, we experimentally retrieve the image of a transilluminated target both sandwiched between two holographic diffusers and embedded in a 6mm-thick sample of chicken breast
Two-particle angular correlations in the search for new physics at future colliders
The analysis of angular particle correlations can yield valuable insights
into the initial state of matter in high-energy collisions, thereby potentially
revealing the existence of Beyond the Standard Model scenarios such as Hidden
Valley (HV). In this study, we focus on a QCD-like hidden sector with
relatively massive HV quarks (~GeV) which might enlarge and
strengthen azimuthal correlations of final-state SM hadrons. In particular, we
study the formation and possible observation of \textit{ridge-like} structures
in the angular two-particle correlation function at future colliders,
with a much cleaner environment than in hadron colliders, such as the LHC.Comment: Talk presented at the International Workshop on Future Linear
Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.
Redes de seguridad para cierre vertical de fachadas
Among other methods, vertical safety nets on the façades of buildings during the construction stage are used in Spain as an alternative to other safety systems in order to avoid falls to a different level. There are two kinds of such nets: floor-to-ceiling nets - that secure the entire void between successive floors in structure construction stage-, and small nets what secure windows and other minor voids in later stages. Their design and requirements are not defined at present, but the AEN/CTN81/SC2/GT7 Spanish Working Group is drafting a specific regulation named Pr UNE 81651. Some members of the Civil Engineering Department of the University of Alicante, having experience in other systems of protection, have developed several finite-elements numerical models to measure and analyse mechanical variables related to a possible fall of a person over this kind of net, characterised by a kinetic energy lower than for other types. In this paper the obtained results are shown, for both large and little nets, analysing the anchorages gap, void openings at perimeter, maximum net deflection and net disposal (square/diamond) repercussion, as well as its consequences on the victim’s safety (impact factor).Entre otros medios de protección colectiva, en los últimos años se vienen utilizando en España redes verticales de cierre de fachadas, a paño completo entre forjados en fase de estructura, y también para huecos menores como ventanas o puertas, en fases posteriores. Este tipo de protección no cuenta hasta el momento con ningún tipo de regulación oficial, si bien en el grupo de trabajo AEN/CTN81/SC2/GT7 se desarrolla actualmente el borrador de la norma Pr UNE 81651 a tal fin. Desde el Dtº. de Ing. de la Construcción de la Universidad de Alicante, varios miembros del grupo de trabajo han desarrollado, contando con la experiencia en otros sistemas de protección, algunos modelos numéricos con elementos finitos para valorar y cuantificar variables mecánicas asociadas al episodio de una eventual caída de una persona sobre este tipo de redes, caracterizado por una menor energía cinética que para otros tipos de ellas. En el artículo se exponen los resultados obtenidos para ambos tipos de paños, grandes y pequeños, donde se han valorado la separación de anclajes de la red, las aberturas generadas en su perímetro durante la retención, los esfuerzos en anclajes y elementos textiles, el factor de impacto que sufriría el accidentado y la repercusión de la disposición geométrica de la red, al cuadro o al rombo
Sistemas de protección individual anticaídas sometidos a impacto. Simulaciones numéricas
Personal fall protection systems are set up by EN-363 to avoid or retain people falls safely (without relevant damages). They are the ultimate resource to prevent a fall after other measures being considered. This paper analyses the variables affecting the system behaviour: free fall height, length of retaining rope, stiffness and damping of retaining material, and worker weight. To this end, fall phenomenon has been simulated with finite elements dynamic models with an elastic rope and a rigid ballast. It allows obtain likely values of maximum forces on the injured and over the system during the impact. Results demonstrate the fundamental role of height fall vs. rope length rate (fall factor), which results more important than the fall height itself. The severe values obtained for maximum forces show that future research would include elastoplastic energy absorbers to decrease impact until reasonable values.Los sistemas anticaída se establecen en UNE-EN-363 para evitar o retener caídas de personas sin que las fuerzas de retención causen daños relevantes. Constituyen el último recurso para prevención de caídas tras considerar otras medidas. Este artículo analiza las variables que afectan al comportamiento del sistema: altura de caída, longitud de cuerda de retención, rigidez y amortiguamiento del material de retención, y peso del operario. A tal fin, el fenómeno ha sido simulado con modelos dinámicos de elementos finitos mediante una cuerda elástica y un lastre rígido. Ello permite obtener valores verosímiles de las máximas fuerzas sobre el accidentado y el sistema durante el impacto. Los resultados demuestran el papel fundamental de la proporción entre altura de caída y longitud de cuerda (factor de caída), más determinante que la propia altura de caída. Las elevadas fuerzas máximas obtenidas indican la necesidad de incluir en el modelo absorbedores de energía elastoplásticos, en futuras investigaciones, con el fin de disminuir el impacto a valores razonables
Matched sizes of activating and inhibitory receptor/ligand pairs are required for optimal signal integration by human Natural Killer cells
It has been suggested that receptor-ligand complexes segregate or co-localise within immune synapses according to their size, and this is important for receptor signaling. Here, we set out to test the importance of receptor-ligand complex dimensions for immune surveillance of target cells by human Natural Killer (NK) cells. NK cell activation is regulated by integrating signals from activating receptors, such as NKG2D, and inhibitory receptors, such as KIR2DL1. Elongating the NKG2D ligand MICA reduced its ability to trigger NK cell activation. Conversely, elongation of KIR2DL1 ligand HLA-C reduced its ability to inhibit NK cells. Whereas normal-sized HLA-C was most effective at inhibiting activation by normal-length MICA, only elongated HLA-C could inhibit activation by elongated MICA. Moreover, HLA-C and MICA that were matched in size co-localised, whereas HLA-C and MICA that were different in size were segregated. These results demonstrate that receptor-ligand dimensions are important in NK cell recognition, and suggest that optimal integration of activating and inhibitory receptor signals requires the receptor-ligand complexes to have similar dimensions
Hadron shower decomposition in the highly granular CALICE analogue hadron calorimeter
The spatial development of hadronic showers in the CALICE scintillator-steel
analogue hadron calorimeter is studied using test beam data collected at CERN
and FNAL for single positive pions and protons with initial momenta in the
range from 10 to 80 GeV/c. Both longitudinal and radial development of hadron
showers are parametrised with two-component functions. The parametrisation is
fit to test beam data and simulations using the QGSP_BERT and FTFP_BERT physics
lists from Geant4 version 9.6. The parameters extracted from data and simulated
samples are compared for the two types of hadrons. The response to pions and
the ratio of the non-electromagnetic to the electromagnetic calorimeter
response, h/e, are estimated using the extrapolation and decomposition of the
longitudinal profiles.Comment: 38 pages, 19 figures, 5 tables; author list changed; submitted to
JINS
Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter
We present a study of showers initiated by electrons, pions, kaons, and
protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE
scintillator-tungsten analogue hadronic calorimeter. The data were recorded at
the CERN Super Proton Synchrotron in 2011. The analysis includes measurements
of the calorimeter response to each particle type as well as measurements of
the energy resolution and studies of the longitudinal and radial shower
development for selected particles. The results are compared to Geant4
simulations (version 9.6.p02). In the study of the energy resolution we include
previously published data with beam momenta from 1 GeV to 10 GeV recorded at
the CERN Proton Synchrotron in 2010.Comment: 35 pages, 21 figures, 8 table
Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC
The uncertainty on the calorimeter energy response to jets of particles is
derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the
calorimeter response to single isolated charged hadrons is measured and
compared to the Monte Carlo simulation using proton-proton collisions at
centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009
and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter
response to specific types of particles (positively and negatively charged
pions, protons, and anti-protons) is measured and compared to the Monte Carlo
predictions. Finally, the jet energy scale uncertainty is determined by
propagating the response uncertainty for single charged and neutral particles
to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3%
for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table,
submitted to European Physical Journal
Measurement of χ c1 and χ c2 production with s√ = 7 TeV pp collisions at ATLAS
The prompt and non-prompt production cross-sections for the χ c1 and χ c2 charmonium states are measured in pp collisions at s√ = 7 TeV with the ATLAS detector at the LHC using 4.5 fb−1 of integrated luminosity. The χ c states are reconstructed through the radiative decay χ c → J/ψγ (with J/ψ → μ + μ −) where photons are reconstructed from γ → e + e − conversions. The production rate of the χ c2 state relative to the χ c1 state is measured for prompt and non-prompt χ c as a function of J/ψ transverse momentum. The prompt χ c cross-sections are combined with existing measurements of prompt J/ψ production to derive the fraction of prompt J/ψ produced in feed-down from χ c decays. The fractions of χ c1 and χ c2 produced in b-hadron decays are also measured
- …