Ball Bearing Mechanics

Load-deflection relationships for different types of elliptical contacts such as those found in a ball bearing are developed. Simplified expressions that allow quick calculations of deformation to be made simply from a knowledge of the applied load, the material properties, and the geometry of the contacting elements are presented. Ball bearings subjected to radial, thrust and combined ball loads are analyzed. A design criterion for fatigue life of ball bearings is developed. The section of a satisfactory lubricant, as well as describing systems that provide a constant flow of lubricant to the contact, is considered

Adverse loading effects on tribocorrosive degradation of 28 mm metal-on-metal hip replacement bearings^*

Following the high clinical failure rates of metal-on-metal total hip replacements much work has been undertaken to investigate their poor performance. So called adverse loading scenarios such as acetabular inclination and microseparation have been attributed to indicators for failure of the implants. The ISO hip simulation standards (ISO 14242:1) still rely on gravimetric and ex situ analysis, considering only the total wear during articulation. Live in situ sensing can provide valuable insight into the degradation mechanisms of metallic interfaces under such scenarios. Clinical 28 mm diameter metal-on-metal components were articulated in a full-ISO hip simulator. The bearings were subjected to increasing angles of acetabular inclination and retroversion over short-term periods of articulation. Corrosive degradation was monitored during sliding by means of an in situ three-electrode cell. Changing acetabular inclination from 30° to 50° resulted in greater cathodic shifts in OCP upon the initiation of sliding; from −50 mV to as much as −150 mV. Under anodic polarisation (0 mV vs. Ag/AgCl) the resultant currents at the initiation of sliding also increased significantly with inclination; from approximately 4–10 µA to over 120 µA. Increased retroversion of 20° also resulted in increased anodic currents of 55–60 µA. Changing the nature of articulation demonstrated increased corrosive material loss compared to a standard ISO 14242 profile. The sole use of gravimetric assessment to determine a wear rate for hip replacement bearings under simulation can therefore neglect important degradation mechanisms, such as tribocorrosive loss in devices with metal sliding interfaces.</p

Transient analysis of isothermal elastohydrodynamic circular point contacts

In this paper a solution method is presented for the transient isothermal elastohydrodynamic lubrication of point contact conjunctions, based upon the Newton-Raphson scheme and low iteration relaxation. The numerical results are compared with the numerical and experimental observations of others for the circular point contact of a ball against a flat glass disc under oscillating conditions. Good agreement has been found with other numerical solutions. The comparison with the experimental results shows good qualitative agreement

A numerical study of non-Newtonian transient elastohydrodynamic lubrication of metal-on-metal hip prostheses

This paper presents a comprehensive numerical study of transient non-Newtonian elastohydrodynamic lubrication of metal-on-metal hip prosthesis subjected to two different gait cycles. The shear-thinning property of the synovial fluid was found to have a significant effect on the lubricating film, in terms of both the magnitude and location of the minimum film thickness, and more generally the film thickness distribution. A range of clearances between the acetabular cup and femoral head was investigated and the shear-thinning effect was more pronounced in the hip replacements with smaller clearances

Lubrication regime of the contact between fat and bone in bovine tissue

Fat pads are masses of encapsulated adipose tissue located throughout the human body. Whilst a number of studies describe these soft tissues anatomically little is known about their biomechanics, and surgeons may excise them arthroscopically if they hinder visual inspection of the joint or bursa. By measuring the coefficient of friction between, and performing Sommerfeld analysis of, the surfaces approximating the in vivo conjuncture, this contact has been shown to have a coefficient of friction of the order of 0.01. The system appears to be lubricated hydrodynamically, thus possibly promoting low levels of wear. It is suggested that one of the functions of fat pads associated with subtendinous bursae and synovial joints is to generate a hydrodynamic lubricating layer between the opposing surfaces

Evidence for niche adaptation in the genome of the bovine pathogen Streptococcus uberis.

BACKGROUND: Streptococcus uberis, a Gram positive bacterial pathogen responsible for a significant proportion of bovine mastitis in commercial dairy herds, colonises multiple body sites of the cow including the gut, genital tract and mammary gland. Comparative analysis of the complete genome sequence of S. uberis strain 0140J was undertaken to help elucidate the biology of this effective bovine pathogen. RESULTS: The genome revealed 1,825 predicted coding sequences (CDSs) of which 62 were identified as pseudogenes or gene fragments. Comparisons with related pyogenic streptococci identified a conserved core (40%) of orthologous CDSs. Intriguingly, S. uberis 0140J displayed a lower number of mobile genetic elements when compared with other pyogenic streptococci, however bacteriophage-derived islands and a putative genomic island were identified. Comparative genomics analysis revealed most similarity to the genomes of Streptococcus agalactiae and Streptococcus equi subsp. zooepidemicus. In contrast, streptococcal orthologs were not identified for 11% of the CDSs, indicating either unique retention of ancestral sequence, or acquisition of sequence from alternative sources. Functions including transport, catabolism, regulation and CDSs encoding cell envelope proteins were over-represented in this unique gene set; a limited array of putative virulence CDSs were identified. CONCLUSION: S. uberis utilises nutritional flexibility derived from a diversity of metabolic options to successfully occupy a discrete ecological niche. The features observed in S. uberis are strongly suggestive of an opportunistic pathogen adapted to challenging and changing environmental parameters.RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are

Inattention, Working Memory, and Goal Neglect in a Community Sample

Executive function deficits have been linked to attention deficit hyperactivity disorder (ADHD), but it has been theorized that the symptom inattention is specifically related to problems with complex verbal working memory (WM). Using the Conners Adult ADHD rating scale, adults aged 18–35 were assessed for ADHD symptoms, and completed tasks designed to tap verbal and spatial aspects of WM (Experiment 1). Results showed that high inattention predicted poor performance on both simple and complex verbal WM measures. Results relating to spatial WM were inconclusive. In a follow up experiment based on the theory that those with inattention have problems receiving verbal instructions, a measure of goal neglect assessing integration of information into a task model in WM was employed (Experiment 2). Results showed that high inattention uniquely predicted performance on this task, representing the first reported association between inattention and the phenomenon of goal neglect. The results from both experiments lend support to the WM theory of inattentio

Development of a new mechano-chemical model in boundary lubrication

A newly developed tribochemical model based on thermodynamics of interfaces and kinetics of tribochemical reactions is implemented in a contact mechanics simulation and the results are validated against experimental results. The model considers both mechanical and thermal activation of tribochemical reactions instead of former thermal activation theories. The model considers tribofilm removal and is able to capture the tribofilm behaviour during the experiment. The aim of this work is to implement tribochemistry into deterministic modelling of boundary lubrication and study the effect of tribofilms in reducing friction or wear. A new contact mechanics model considering normal and tangential forces in boundary lubrication is developed for two real rough steel surfaces. The model is developed for real tribological systems and is flexible to different laboratory experiments. Tribochemistry (e.g. tribofilm formation and removal) and also mechanical properties are considered in this model. The amount of wear is calculated using a modified Archard’s wear equation accounting for local tribofilm thickness and its mechanical properties. This model can be used for monitoring the tribofilm growth on rough surfaces and also the real time surface roughness as well as changes in the λ ratio. This model enables the observation of in-situ tribofilm thickness and surface coverage and helps in better understanding the real mechanisms of wear

Effectiveness of a targeted exercise intervention in reversing older peoples mild balance dysfunction: A randomised controlled trail

Background: Previous research has mainly targeted older people with high risk of falling. The effectiveness of exercise interventions in older people with mild levels of balance dysfunction remains unexplored. Objective: This study evaluated the effectiveness of a home balance and strength exercise intervention in older people systematically screened as having mild balance dysfunction. Design: This was a community-based, randomized controlled trial with assessors blinded to group allocation. Participants: Study participants were older people who reported concerns about their balance but remained community ambulant (n=225). After a comprehensive balance assessment, those classified as having mild balance dysfunction (n=165) were randomized into the trial. Intervention: Participants in the intervention group (n=83) received a 6-month physical therapist–prescribed balance and strength home exercise program, based on the Otago Exercise Program and the Visual Health Information Balance and Vestibular Exercise Kit. Participants in the control group (n=82) continued with their usual activities. Outcome Measures: Laboratory and clinical measures of balance, mobility, and strength were assessed at baseline and at a 6-month reassessment.Results: After 6 months, the intervention group (n=59) significantly improved relative to the control group (n=62) for: the Functional Reach Test (mean difference=2.95 cm, 95% confidence interval [CI]=1.75 to 4.15), the Step Test (2.10 steps/15 seconds, 95% CI=1.17 to 3.02), hip abductor strength (0.02, 95% CI=0.01 to 0.03), and gait step width (2.17 cm, 95% CI=1.23 to 3.11). There were nonsignificant trends for improvement on most other measures. Fourteen participants in the intervention group (23.7%) achieved balance performance within the normative range following the exercise program, compared with 3 participants (4.8%) in the control group. Limitations: Loss to follow-up (26.6%) was slightly higher than in some similar studies but was unlikely to have biased the results. Conclusions: A physical therapist–prescribed home exercise program targeting balance and strength was effective in improving a number of balance and related outcomes in older people with mild balance impairment