Oxygen Consumption in South African Sauvignon Blanc Wines: Role of Glutathione, Sulphur Dioxide and Certain Phenolics

The aim of this research was to investigate the interaction between sulphur dioxide, glutathione (GSH) and certain phenols in the presence of oxygen in a synthetic wine and in clarified Sauvignon blanc wine. In this study, the clarified wine, from which most of the phenols had been removed, was compared to synthetic wine solution, with both mediums being enriched with caffeic acid to investigate the effect of different levels of sulphur dioxide and GSH on oxygen consumption. Moreover, thirteen young South African Sauvignon blanc wines with different levels of sulphur dioxide were oxygenated, and the oxygen consumption and phenolic and colour changes were monitored over time. The results show that oxygen consumption was influenced greatly by the presence of sulphur dioxide and, to a lesser extent, by the presence of GSH, with both compounds decreasing during the course of the experiment. During oxidation, an increase was observed in glutathionyl caffeic acid, as well as in oxidised glutathione (GSSG); however, this did not coincide with the percentage decrease in GSH. Oxidation further led to an increase in absorbance measurements at 420 and 440 nm (yellow-orange colour), which were reduced by the presence of SO2. A large variation was also observed in the oxygen consumption of the young wines, with this rate increasing with an increase in SO2 concentration. Positive correlations were also observed between oxygen, SO2, GSH and Cu concentrations, which were again negatively correlated with absorbance at 420 and 440 nm and GSSG concentrations

A New Similarity/Diversity Measure for the Characterization of DNA Sequences

In this paper, a new similarity/diversity measure is proposed as a new approach to the analysis of sequential data, where useful information can be also obtained by the ordering relationships between the sequence elements. This methodology has been applied to characterize DNA sequences, evaluating their similarity/diversity. The new proposed distance (weighted standardized Hasse distance) is evaluated between pairs of Hasse matrices derived from the classical partial ordering rules. It can be naturally standardized, thus allowing the interpretation of these distances as absolute values (e.g. percentage) and deriving simple similarity and correlation indices. DNA sequences taken from the first exons of the beta-globins for eight different species have been analyzed. Sensitivity analysis has been also performed, showing the high capability of this measure to take into account small modifications of the DNA sequences. Finally, a comparison with results obtained from literature is given

A QSTR-based expert system to predict sweetness of molecules

This work describes a novel approach based on advanced molecular similarity to predict the sweetness of chemicals. The proposed Quantitative Structure-Taste Relationship (QSTR) model is an expert system developed keeping in mind the five principles defined by the Organization for Economic Co-operation and Development (OECD) for the validation of (Q)SARs. The 649 sweet and non-sweet molecules were described by both conformation-independent extended-connectivity fingerprints (ECFPs) and molecular descriptors. In particular, the molecular similarity in the ECFPs space showed a clear association with molecular taste and it was exploited for model development. Molecules laying in the subspaces where the taste assignation was more difficult were modeled trough a consensus between linear and local approaches (Partial Least Squares-Discriminant Analysis and N-nearest-neighbor classifier). The expert system, which was thoroughly validated through a Monte Carlo procedure and an external set, gave satisfactory results in comparison with the state-of-the-art models. Moreover, the QSTR model can be leveraged into a greater understanding of the relationship between molecular structure and sweetness, and into the design of novel sweeteners.Instituto de Investigaciones Fisicoquímicas Teóricas y AplicadasFacultad de Ciencias Exacta

Diabetes mellitus type 2: Exploratory data analysis based on clinical reading

Diabetes mellitus type 2 (DMT2) is a severe and complex health problem. It is the most common type of diabetes. DMT2 is a chronic metabolic disorder that affects the way your body metabolizes sugar. With DMT2, your body either resists the effects of insulin or does not produce sufficient insulin to continue normal glucose levels. DMT2 is a disease that requires a multifactorial approach of controlling that includes lifestyle change and pharmacotherapy. Less than ideal management increases the risk of developing complications and comorbidities such as cardiovascular disease and numerous social and economic penalties. That is why the studies dedicated to the pathophysiological mechanisms and the treatment of DMT2 are extremely numerous and diverse. In this study, exploratory data analysis approaches are applied for the treatment of clinical and anthropometric readings of patients with DMT2. Since multivariate statistics is a well-known method for classification, modeling and interpretation of large collections of data, the major aim of the present study was to reveal latent relations between the objects of the investigation (group of patients and control group) and the variables describing the objects (clinical and anthropometric parameters). In the proposed method by the application of hierarchical cluster analysis and principal component analysis it is possible to identify reduced number of parameters which appear to be the most significant discriminant parameters to distinguish between four patterns of patients with DMT2. However, there is still lack of multivariate statistical studies using DMT2 data sets to assess different aspects of the problem like optimal rapid monitoring of the patients or specific separation of patients into patterns of similarity related to their health status which could be of help in preparation of data bases for DMT2 patients. The outcome from the study could be of custom for the selection of significant tests for rapid monitoring of patients and more detailed approach to the health status of DMT2 patients

Charging Induced Emission of Neutral Atoms from NaCl Nanocube Corners

Detachment of neutral cations/anions from solid alkali halides can in principle be provoked by donating/subtracting electrons to the surface of alkali halide crystals, but generally constitutes a very endothermic process. However, the amount of energy required for emission is smaller for atoms located in less favorable positions, such as surface steps and kinks. For a corner ion in an alkali halide cube the binding is the weakest, so it should be easier to remove that atom, once it is neutralized. We carried out first principles density functional calculations and simulations of neutral and charged NaCl nanocubes, to establish the energetics of extraction of neutralized corner ions. Following hole donation (electron removal) we find that detachment of neutral Cl corner atoms will require a limited energy of about 0.8 eV. Conversely, following the donation of an excess electron to the cube, a neutral Na atom is extractable from the corner at the lower cost of about 0.6 eV. Since the cube electron affinity level (close to that a NaCl(100) surface state, which we also determine) is estimated to lie about 1.8 eV below vacuum, the overall energy balance upon donation to the nanocube of a zero energy electron from vacuum will be exothermic. The atomic and electronic structure of the NaCl(100) surface, and of the nanocube Na and Cl corner vacancies are obtained and analyzed as a byproduct.Comment: 16 pages, 2 table, 7 figure

A QSTR-based expert system to predict sweetness of molecules

This work describes a novel approach based on advanced molecular similarity to predict the sweetness of chemicals. The proposed Quantitative Structure-Taste Relationship (QSTR) model is an expert system developed keeping in mind the five principles defined by the Organization for Economic Co-operation and Development (OECD) for the validation of (Q)SARs. The 649 sweet and non-sweet molecules were described by both conformation-independent extended-connectivity fingerprints (ECFPs) and molecular descriptors. In particular, the molecular similarity in the ECFPs space showed a clear association with molecular taste and it was exploited for model development. Molecules laying in the subspaces where the taste assignation was more difficult were modeled trough a consensus between linear and local approaches (Partial Least Squares-Discriminant Analysis and N-nearest-neighbor classifier). The expert system, which was thoroughly validated through a Monte Carlo procedure and an external set, gave satisfactory results in comparison with the state-of-the-art models. Moreover, the QSTR model can be leveraged into a greater understanding of the relationship between molecular structure and sweetness, and into the design of novel sweeteners.Instituto de Investigaciones Fisicoquímicas Teóricas y AplicadasFacultad de Ciencias Exacta

ToF-SIMS and Machine Learning for Single-Pixel Molecular Discrimination of an Acrylate Polymer Microarray

© 2020 American Chemical Society. Combinatorial approaches to materials discovery offer promising potential for the rapid development of novel polymer systems. Polymer microarrays enable the high-throughput comparison of material physical and chemical properties - such as surface chemistry and properties like cell attachment or protein adsorption - in order to identify correlations that can progress materials development. A challenge for this approach is to accurately discriminate between highly similar polymer chemistries or identify heterogeneities within individual polymer spots. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) offers unique potential in this regard, capable of describing the chemistry associated with the outermost layer of a sample with high spatial resolution and chemical sensitivity. However, this comes at the cost of generating large scale, complex hyperspectral imaging data sets. We have demonstrated previously that machine learning is a powerful tool for interpreting ToF-SIMS images, describing a method for color-tagging the output of a self-organizing map (SOM). This reduces the entire hyperspectral data set to a single reconstructed color similarity map, in which the spectral similarity between pixels is represented by color similarity in the map. Here, we apply the same methodology to a ToF-SIMS image of a printed polymer microarray for the first time. We report complete, single-pixel molecular discrimination of the 70 unique homopolymer spots on the array while also identifying intraspot heterogeneities thought to be related to intermixing of the polymer and the pHEMA coating. In this way, we show that the SOM can identify layers of similarity and clusters in the data, both with respect to polymer backbone structures and their individual side groups. Finally, we relate the output of the SOM analysis with fluorescence data from polymer-protein adsorption studies, highlighting how polymer performance can be visualized within the context of the global topology of the data set

Exploring the Relationship between Polymer Surface Chemistry and Bacterial Attachment Using ToF-SIMS and Self-Organizing maps

Biofilm formation is a major cause of hospital-acquired infections. Research into biofilm-resistant materials is therefore critical to reduce the frequency of these events. Polymer microarrays offer a high-throughput approach to enable the efficient discovery of novel biofilm-resistant polymers. Herein, bacterial attachment and surface chemistry are studied for a polymer microarray to improve the understanding of Pseudomonas aeruginosa biofilm formation on a diverse set of polymeric surfaces. The relationships between time-of-flight secondary ion mass spectrometry (ToF-SIMS) data and biofilm formation are analyzed using linear multivariate analysis (partial least squares [PLS] regression) and a nonlinear self-organizing map (SOM). The SOM models revealed several combinations of fragment ions that are positively or negatively associated with bacterial biofilm formation, which are not identified by PLS. With these insights, a second PLS model is calculated, in which interactions between key fragments (identified by the SOM) are explicitly considered. Inclusion of these terms improved the PLS model performance and shows that, without such terms, certain key fragment ions correlated with bacterial attachment may not be identified. The chemical insights provided by the combination of PLS regression and SOM will be useful for the design of materials that support negligible pathogen attachment

CATMoS: Collaborative Acute Toxicity Modeling Suite.

BACKGROUND: Humans are exposed to tens of thousands of chemical substances that need to be assessed for their potential toxicity. Acute systemic toxicity testing serves as the basis for regulatory hazard classification, labeling, and risk management. However, it is cost- and time-prohibitive to evaluate all new and existing chemicals using traditional rodent acute toxicity tests. In silico models built using existing data facilitate rapid acute toxicity predictions without using animals. OBJECTIVES: The U.S. Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) Acute Toxicity Workgroup organized an international collaboration to develop in silico models for predicting acute oral toxicity based on five different end points: Lethal Dose 50 (LD50 value, U.S. Environmental Protection Agency hazard (four) categories, Globally Harmonized System for Classification and Labeling hazard (five) categories, very toxic chemicals [LD50 (LD50≤50mg/kg)], and nontoxic chemicals (LD50>2,000mg/kg). METHODS: An acute oral toxicity data inventory for 11,992 chemicals was compiled, split into training and evaluation sets, and made available to 35 participating international research groups that submitted a total of 139 predictive models. Predictions that fell within the applicability domains of the submitted models were evaluated using external validation sets. These were then combined into consensus models to leverage strengths of individual approaches. RESULTS: The resulting consensus predictions, which leverage the collective strengths of each individual model, form the Collaborative Acute Toxicity Modeling Suite (CATMoS). CATMoS demonstrated high performance in terms of accuracy and robustness when compared with in vivo results. DISCUSSION: CATMoS is being evaluated by regulatory agencies for its utility and applicability as a potential replacement for in vivo rat acute oral toxicity studies. CATMoS predictions for more than 800,000 chemicals have been made available via the National Toxicology Program's Integrated Chemical Environment tools and data sets (ice.ntp.niehs.nih.gov). The models are also implemented in a free, standalone, open-source tool, OPERA, which allows predictions of new and untested chemicals to be made. https://doi.org/10.1289/EHP8495

Mortality and pulmonary complications in patients undergoing surgery with perioperative SARS-CoV-2 infection: an international cohort study

Background: The impact of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on postoperative recovery needs to be understood to inform clinical decision making during and after the COVID-19 pandemic. This study reports 30-day mortality and pulmonary complication rates in patients with perioperative SARS-CoV-2 infection. Methods: This international, multicentre, cohort study at 235 hospitals in 24 countries included all patients undergoing surgery who had SARS-CoV-2 infection confirmed within 7 days before or 30 days after surgery. The primary outcome measure was 30-day postoperative mortality and was assessed in all enrolled patients. The main secondary outcome measure was pulmonary complications, defined as pneumonia, acute respiratory distress syndrome, or unexpected postoperative ventilation. Findings: This analysis includes 1128 patients who had surgery between Jan 1 and March 31, 2020, of whom 835 (74·0%) had emergency surgery and 280 (24·8%) had elective surgery. SARS-CoV-2 infection was confirmed preoperatively in 294 (26·1%) patients. 30-day mortality was 23·8% (268 of 1128). Pulmonary complications occurred in 577 (51·2%) of 1128 patients; 30-day mortality in these patients was 38·0% (219 of 577), accounting for 81·7% (219 of 268) of all deaths. In adjusted analyses, 30-day mortality was associated with male sex (odds ratio 1·75 [95% CI 1·28–2·40], p\textless0·0001), age 70 years or older versus younger than 70 years (2·30 [1·65–3·22], p\textless0·0001), American Society of Anesthesiologists grades 3–5 versus grades 1–2 (2·35 [1·57–3·53], p\textless0·0001), malignant versus benign or obstetric diagnosis (1·55 [1·01–2·39], p=0·046), emergency versus elective surgery (1·67 [1·06–2·63], p=0·026), and major versus minor surgery (1·52 [1·01–2·31], p=0·047). Interpretation: Postoperative pulmonary complications occur in half of patients with perioperative SARS-CoV-2 infection and are associated with high mortality. Thresholds for surgery during the COVID-19 pandemic should be higher than during normal practice, particularly in men aged 70 years and older. Consideration should be given for postponing non-urgent procedures and promoting non-operative treatment to delay or avoid the need for surgery. Funding: National Institute for Health Research (NIHR), Association of Coloproctology of Great Britain and Ireland, Bowel and Cancer Research, Bowel Disease Research Foundation, Association of Upper Gastrointestinal Surgeons, British Association of Surgical Oncology, British Gynaecological Cancer Society, European Society of Coloproctology, NIHR Academy, Sarcoma UK, Vascular Society for Great Britain and Ireland, and Yorkshire Cancer Research