Mechanical and physical performance of carbon aerogel reinforced carbon fibre hierarchical composites

Carbon aerogel (CAG) is a potential hierarchical reinforcement to improve the matrix-dominated mechanical properties of continuous carbon fibre reinforced polymer (CFRP) composites in both multifunctional and purely structural applications. When using CAG to reinforce a polyethylene glycol diglycidyl ether (PEGDGE) matrix, the interlaminar shear strength, compressive modulus and strength increased approximately four-fold, whilst the out-of-plane electrical conductivity increased by 118%. These mechanical and electrical performance enhancements significantly improve the multifunctional efficiency of composite structural supercapacitors, which can offer weight savings in transport and other applications. However, CAG also has the potential to reinforce conventional continuous CF composites in purely structural contexts. Here, CAG reinforcement of structural epoxy resin composites marginally increased compressive (1.4%) and tensile (2.7%) moduli respectively, but considerably reduced compressive, tensile and interlaminar shear strengths. Fractographic analysis shows that the reduced performance can be attributed to poor interfacial adhesion; in the future, alternative processing routes may resolve these issues to achieve advances in both moduli and strengths over conventional structural CFRPs

Impact Factor: outdated artefact or stepping-stone to journal certification?

A review of Garfield's journal impact factor and its specific implementation as the Thomson Reuters Impact Factor reveals several weaknesses in this commonly-used indicator of journal standing. Key limitations include the mismatch between citing and cited documents, the deceptive display of three decimals that belies the real precision, and the absence of confidence intervals. These are minor issues that are easily amended and should be corrected, but more substantive improvements are needed. There are indications that the scientific community seeks and needs better certification of journal procedures to improve the quality of published science. Comprehensive certification of editorial and review procedures could help ensure adequate procedures to detect duplicate and fraudulent submissions.Comment: 25 pages, 12 figures, 6 table

Culture Shapes Efficiency of Facial Age Judgments

Background: Cultural differences in socialization can lead to characteristic differences in how we perceive the world. Consistent with this influence of differential experience, our perception of faces (e.g., preference, recognition ability) is shaped by our previous experience with different groups of individuals. Methodology/Principal Findings: Here, we examined whether cultural differences in social practices influence our perception of faces. Japanese, Chinese, and Asian-Canadian young adults made relative age judgments (i.e., which of these two faces is older?) for East Asian faces. Cross-cultural differences in the emphasis on respect for older individuals was reflected in participants ’ latency in facial age judgments for middle-age adult faces—with the Japanese young adults performing the fastest, followed by the Chinese, then the Asian-Canadians. In addition, consistent with the differential behavioural and linguistic markers used in the Japanese culture when interacting with individuals younger than oneself, only the Japanese young adults showed an advantage in judging the relative age of children’s faces. Conclusions/Significance: Our results show that different sociocultural practices shape our efficiency in processing facia

Study of mass and momentum transfer in diesel sprays base on X-ray mass distribution measurements and on a theoretical derivation

[EN] In this paper, a research aimed at quantifying mass and momentum transfer in the near-nozzle field of diesel sprays injected into stagnant ambient air is reported. The study combines X-ray measurements for two different nozzles and axial positions, which provide mass distributions in the spray, with a theoretical model based on momentum flux conservation, which was previously validated. This investigation has allowed the validation of Gaussian profiles for local fuel concentration and velocity near the nozzle exit, as well as the determination of Schmidt number at realistic diesel spray conditions. This information could be very useful for those who are interested in spray modeling, especially at high-pressure injection conditions. © 2010 Springer-Verlag.This work was partly sponsored by "Vicerrectorado de Investigacion, Desarrollo e Innovacion'' of the "Universidad Politecnica de Valencia'' in the frame of the project "Estudio del flujo en el interior de toberas de inyeccion Diesel'', reference no. 3150 and by "Generalitat Valenciana'' in the frame of the project with the same title and reference GV/2009/031. This support is gratefully acknowledged by the authors.Desantes, J.; Salvador Rubio, FJ.; López, JJ.; De La Morena, J. (2011). Study of mass and momentum transfer in diesel sprays base on X-ray mass distribution measurements and on a theoretical derivation. Experiments in Fluids. 50(2):233-246. https://doi.org/10.1007/s00348-010-0919-8S233246502Abramovich GN (1963) The theory of turbulent jets. MIT Press, Cambridge, MAAdler D, Lyn WT (1969) The evaporation and mixing of a liquid fuel spray in a Diesel air swirl. Proc Instn Mech Eng 184:171–180Coghe A, Cossali GE (1994) Phase Doppler characterisation of a Diesel spray injected into a high density gas under vaporisation regimes. In: 7th international symposium on application of laser techniques to fluid mechanics, LisbonCorreas D (1998) Theoretical and experimental study of isothermal Diesel free sprays (in Spanish). PhD Thesis, Universidad Politécnica de ValenciaCossali GE (2001) An integral model for gas entrainment into full cone sprays. J Fluid Mech 439:353–366Dent JC (1971) A basis for the comparison of various experimental methods for studying spray penetration. SAE Paper 710571Desantes JM, Payri R, Salvador FJ, Gil A (2006a) Deduction and validation of a theoretical model for a free diesel Spray. Fuel 85:910–917Desantes JM, Arrègle J, López JJ, Cronhjort A (2006b) Scaling laws for free turbulent gas jets and Diesel-like sprays. Atomization Spray 16:443–473Desantes JM, Payri R, García JM, Salvador FJ (2007) A contribution to the understanding of isothermal diesel spray dynamics. Fuel 86:1093–1101Dumouchel C (2008) On the experimental investigation on primary atomization of liquid streams. Exp Fluids 45:371–422Heimgärtner C, Leipertz A (2000) of the primary spray break-up close to the nozzle of a common-rail high pressure diesel injection system. SAE Paper 2000-01-1799Hinze JO (1975) Turbulence. McGraw Hill, New YorkHiroyasu H, Arai M (1990) Structures of fuel sprays in diesel engines. SAE Paper 900475Jawad B, Gulari E, Henein NA (1992) Characteristics of intermittent fuel sprays. Combust Flame 88:384–396Lefèbvre AH (1989) Atomization and sprays. Hemisphere, New YorkLeick P, Riedel T, Bittlinger G, Powell CF, Kastengren AL, Wang J (2007) X-Ray measurements of the mass distribution in the dense primary break-up region of the spray from a standard multi-hole common-rail diesel injection system. In: Proc 21st ILASS (Europe)Linne M, Paciaroni M, Hall T, Parker T (2006) Ballistic imaging of the near field in a diesel spray. Exp Fluids 40:836–846Naber J, Siebers DL (1996) Effects of gas density and vaporisation on penetration and dispersion of diesel sprays. SAE Paper 960034Payri F, Bermúdez V, Payri R, Salvador FJ (2004) The influence of cavitation on the internal flow and the Spray characteristics in diesel injection nozzles. Fuel 83:419–431Payri R, García JM, Salvador FJ, Gimeno J (2005) Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics. Fuel 84:551–561Payri R, Tormos B, Salvador FJ, Araneo L (2008) Spray droplet velocity characterization for convergent nozzles with three different diameters. Fuel 87:3176–3182Post S, Iyer V, Abraham J (2000) A study of near-field entrainment in gas jets and sprays under diesel conditions. ASME J Fluids Eng 122:385–395Prasad CMV, Kar S (1976) An investigation on the diffusion of momentum and mass of fuel in a diesel fuel spray. ASME J Eng Power 76-DGP-1:1–11Rajaratnam N (1976) Turbulent jets. Elsevier, AmsterdamRamirez AI, Som S, Aggarwal SK, Kastengren AL, El-Hannouny EM, Longman DE, Powell CF (2009) Quantitative X-ray measurements of high-pressure fuel sprays from a production heavy duty diesel injector. Exp Fluids 47:119–134Reitz RD, Bracco FV (1982) Mechanism of atomisation of a liquid jet. Phys Fluids 25(10):1730–1742Ricou FP, Spalding DB (1961) Measurements of entrainment by axisymmetrical turbulent jets. J Fluid Mech 11:21–32Rife J, Heywood JB (1974) Photographic and performance studies of diesel combustion with a rapid compression machine. SAE Paper 740948Roisman IV, Tropea C (2001) Flux measurements in sprays using phase doppler techniques. Atomization Spray 11:667–699Roisman IV, Araneo L, Tropea C (2007) Effect of ambient pressure on penetration of a diesel spray. Int J Multiphase Flow 33(8):904–920Saliba R, Baz I, Champoussin JC, Lance M, Marié JL (2004) Cavitation effect on the near nozzle spray development in high-pressure diesel injection. In: Proc 19th ILASS (Europe)Schlichting H (1978) Boundary layer theory. McGraw Hill, New YorkSinnamon JF, Lancaster DR, Stiener JC (1980) An experimental and analytical study of engine fuel spray trajectories. SAE Paper 800135Sou A, Hosokawa S, Tomiyama A (2007) Effects of cavitation in a nozzle on liquid jet atomization. Int J Heat Mass Tran 50(17–18):3575–3582Spalding DB (1979) Combustion and mass transfer. Pergamon Press, New YorkSubramaniam S (2001) Statistical modelling of a spray as using the droplet distribution function. Phys Fluids 13(3):624–642Tanner FX, Feigl A, Ciatti SA, Powell CF, Cheong S-K, Liu J, Wang J (2006) Structure of high-velocity dense sprays in the near-nozzle region. Atomization Spray 16:579–597Way RJB (1977) Investigation of interaction between swirl and jets in direct injection diesel engines using a water model. SAE Paper 770412Wu KJ, Santavicca DA, Bracco FV (1984) LDV measurements of drop velocity in diesel-type sprays. AAIA J 22(9):1263–1270Wu KJ, Reitz RD, Bracco FV (1986) Measurements of drop size at the spray edge near the nozzle in atomising liquid jets. Phys Fluids 29(4):941–951Yue Y, Powell CF, Poola R, Wang J, Schaller JK (2001) Quantitative measurements of diesel fuel spray characteristics in the near-nozzle region using X-ray absorption. Atomization Spray 11(4):471–49

A First Generation Microsatellite- and SNP-Based Linkage Map of Jatropha

Jatropha curcas is a potential plant species for biodiesel production. However, its seed yield is too low for profitable production of biodiesel. To improve the productivity, genetic improvement through breeding is essential. A linkage map is an important component in molecular breeding. We established a first-generation linkage map using a mapping panel containing two backcross populations with 93 progeny. We mapped 506 markers (216 microsatellites and 290 SNPs from ESTs) onto 11 linkage groups. The total length of the map was 1440.9 cM with an average marker space of 2.8 cM. Blasting of 222 Jatropha ESTs containing polymorphic SSR or SNP markers against EST-databases revealed that 91.0%, 86.5% and 79.2% of Jatropha ESTs were homologous to counterparts in castor bean, poplar and Arabidopsis respectively. Mapping 192 orthologous markers to the assembled whole genome sequence of Arabidopsis thaliana identified 38 syntenic blocks and revealed that small linkage blocks were well conserved, but often shuffled. The first generation linkage map and the data of comparative mapping could lay a solid foundation for QTL mapping of agronomic traits, marker-assisted breeding and cloning genes responsible for phenotypic variation

Mechanical model for a collagen fibril pair in extracellular matrix

In this paper, we model the mechanics of a collagen pair in the connective tissue extracellular matrix that exists in abundance throughout animals, including the human body. This connective tissue comprises repeated units of two main structures, namely collagens as well as axial, parallel and regular anionic glycosaminoglycan between collagens. The collagen fibril can be modeled by Hooke's law whereas anionic glycosaminoglycan behaves more like a rubber-band rod and as such can be better modeled by the worm-like chain model. While both computer simulations and continuum mechanics models have been investigated the behavior of this connective tissue typically, authors either assume a simple form of the molecular potential energy or entirely ignore the microscopic structure of the connective tissue. Here, we apply basic physical methodologies and simple applied mathematical modeling techniques to describe the collagen pair quantitatively. We find that the growth of fibrils is intimately related to the maximum length of the anionic glycosaminoglycan and the relative displacement of two adjacent fibrils, which in return is closely related to the effectiveness of anionic glycosaminoglycan in transmitting forces between fibrils. These reveal the importance of the anionic glycosaminoglycan in maintaining the structural shape of the connective tissue extracellular matrix and eventually the shape modulus of human tissues. We also find that some macroscopic properties, like the maximum molecular energy and the breaking fraction of the collagen, are also related to the microscopic characteristics of the anionic glycosaminoglycan

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Genetic and epigenetic silencing of the beclin 1 gene in sporadic breast tumors

<p>Abstract</p> <p>Background</p> <p>Beclin 1, an important autophagy-related protein in human cells, is involved in cell death and cell survival. <it>Beclin 1 </it>mapped to human chromosome 17q21. It is widely expressed in normal mammary epithelial cells. Although down-regulated expression with mono-allelic deletions of <it>beclin 1 </it>gene was frequently observed in breast tumors, whether there was other regulatory mechanism of <it>beclin 1 </it>was to be investigated. We studied the expression of beclin 1 and explored the possible regulatory mechanisms on its expression in breast tumors.</p> <p>Methods</p> <p>20 pairs of tumors and adjacent normal tissues from patients with sporadic breast invasive ductal cancer (IDCs) were collected. The mRNA expression of <it>beclin 1 </it>was detected by real-time quantitative RT-PCR. Loss of heterozygosity (LOH) was determined by real-time quantitative PCR and microsatellite methods. The protein expression of beclin 1, p53, BRCA1 and BRCA2 was assessed by immunohistochemistry. CpG islands in 5' genomic region of beclin 1 gene were identified using MethylPrimer Program. Sodium bisulfite sequencing was used in examining the methylation status of each CpG island.</p> <p>Results</p> <p>Decreased <it>beclin 1 </it>mRNA expression was detected in 70% of the breast tumors, and the protein levels were co-related to the mRNA levels. Expression of <it>beclin 1 </it>mRNA was demonstrated to be much higher in the BRCA1 positive tumors than that in the BRCA1 negative ones. Loss of heterozygosity was detected in more than 45% of the breast tumors, and a dense cluster of CpG islands was found from the 5' end to the intron 2 of the <it>beclin 1 </it>gene. Methylation analysis showed that the promoter and the intron 2 of beclin 1 were aberrantly methylated in the tumors with decreased expression.</p> <p>Conclusions</p> <p>These data indicated that LOH and aberrant DNA methylation might be the possible reasons of the decreased expression of <it>beclin 1 </it>in the breast tumors. The findings here shed some new light on the regulatory mechanisms of beclin 1 in breast cancer.</p