The impact of carcase estimated breeding values on yield and quality of sheep meat

The aims of this study were to investigate the impact of carcase estimated breeding values on carcase size and lean meat yield of lambs and to determine whether nutrition alters these responses. Selection for high estimated breeding values for growth increased carcase size by as much as 4 kg in lambs fed a high plane of nutrition. On a low plane of nutrition, this effect was reduced by 60%, highlighting the importance of nutrition for realizing the potential of this trait. Selection for estimated breeding values for muscling reduced total carcase fatness by 3% in lambs fed at a low plane of nutrition and by 10% in lambs fed at a high plane of nutrition, resulting in an increase in lean meat yield and improved economic returns for sales based on a lean-meat-yield grid. Selecting for estimated breeding values for low fat depth reduced total carcase fatness by 4%; this effect was the same whether lambs were maintained on high or low planes of nutrition. Other aspects of meat quality maybe influenced by using sires selected for muscling. Meat tenderness may be reduced due to greater connective tissue content, but it is likely that this can be controlled by concurrent selection for growth. Juiciness and flavour may be reduced due to reduced intramuscular fat content, but this can be attenuated by nutritional practices and, in the longer term, by alleviating the negative selection for fatness. Selection for a combination of muscling and growth estimated breeding values in terminal sires is an excellent way to increase both carcase size and lean meat yield of lambs - and to provide greater returns for producers

The effect of lamb carcase weight and GR depth on the production of value-added cuts – A short communication

Times for the progressive breakdown of 95 lamb carcases were recorded to determine the impact of carcase weight and GR tissue depth on the time and therefore cost to produce value added retail cuts. Further analysis also assessed the potential to use these carcase traits as predictors of fabrication times. Regression modeling demonstrated there was a limited ability to predict the difference in time to fabricate mid value-added (R2 = 0.18) and extreme value-added (R2 = 0.12) cuts compared to traditional cuts, suggesting that other factors need to be considered. However, this study highlighted the significant increases in time required to fabricate more value-added cuts and to breakdown heavier carcases. Furthermore, this study demonstrated the changes to the saleable meat yield as the degree of fabrication increased, such that the average product prices increased ($20.64/kg for mid value added and$28.72/kg for extreme value added) compared to traditional retail cuts ($15/kg) to offset the increased labour of fabricating value-added cuts

Application of 13C NMR to investigate the transformations and biodegradation of organic materials by wood- and soil-feeding termites, and a coprophagous litter-dwelling dipteran larva

Solid-state 13C nuclear magnetic resonance spectroscopy has been used to characterize the C in samples of the food (wood), gut contents and faeces from the wood-feeding termite, Microcerotermes parvus; soil in the guts and mound material from the soil-feeding termite, Thoracotermes macrothorax; and the food and faeces from the litter-feeding, coprophagous larvae of the dipteran fly, Bibio marci. Spectra from the wood-feeding termite indicated preferential loss of polysaccharide and accumulation of lignin with some modification to the O-aromatic-C and methoxyl-C (O-methyl-C) components during passage through the gut. Spectra for the soil-feeding termite indicated little change in the distribution of 13C between resonances following passage through the gut, except for some evidence of preferential polysaccharide loss. Interpretation of the spectra from these organisms was restricted by the relatively low C content of the soils and mound material, and by the large contribution to the NMR spectra from the gut tissue rather than the gut contents. Spectra for the litter-feeding dipteran larvae indicated preferential feeding on the polysaccharide-rich component of the litter and then overall loss of polysaccharide-C and accumulation of both aromatic-C and methoxyl-C in the gut. These changes were greater for the second passage than for the first passage through the gut, suggesting that principally mechanical and physical changes occurred initially and that chemical digestion was prevalent during the second passage

Second harmonic generation and birefringence of some ternary pnictide semiconductors

A first-principles study of the birefringence and the frequency dependent second harmonic generation (SHG) coefficients of the ternary pnictide semiconductors with formula ABC$_2$ (A = Zn, Cd; B = Si, Ge; C = As, P) with the chalcopyrite structures was carried out. We show that a simple empirical observation that a smaller value of the gap is correlated with larger value of SHG is qualitatively true. However, simple inverse power scaling laws between gaps and SHG were not found. Instead, the real value of the nonlinear response is a result of a very delicate balance between different intraband and interband terms.Comment: 13 pages, 12 figure

Search for the standard model Higgs boson decaying into two photons in pp collisions at sqrt(s)=7 TeV

A search for a Higgs boson decaying into two photons is described. The analysis is performed using a dataset recorded by the CMS experiment at the LHC from pp collisions at a centre-of-mass energy of 7 TeV, which corresponds to an integrated luminosity of 4.8 inverse femtobarns. Limits are set on the cross section of the standard model Higgs boson decaying to two photons. The expected exclusion limit at 95% confidence level is between 1.4 and 2.4 times the standard model cross section in the mass range between 110 and 150 GeV. The analysis of the data excludes, at 95% confidence level, the standard model Higgs boson decaying into two photons in the mass range 128 to 132 GeV. The largest excess of events above the expected standard model background is observed for a Higgs boson mass hypothesis of 124 GeV with a local significance of 3.1 sigma. The global significance of observing an excess with a local significance greater than 3.1 sigma anywhere in the search range 110-150 GeV is estimated to be 1.8 sigma. More data are required to ascertain the origin of this excess.Comment: Submitted to Physics Letters

Measurement of the Lambda(b) cross section and the anti-Lambda(b) to Lambda(b) ratio with Lambda(b) to J/Psi Lambda decays in pp collisions at sqrt(s) = 7 TeV

The Lambda(b) differential production cross section and the cross section ratio anti-Lambda(b)/Lambda(b) are measured as functions of transverse momentum pt(Lambda(b)) and rapidity abs(y(Lambda(b))) in pp collisions at sqrt(s) = 7 TeV using data collected by the CMS experiment at the LHC. The measurements are based on Lambda(b) decays reconstructed in the exclusive final state J/Psi Lambda, with the subsequent decays J/Psi to an opposite-sign muon pair and Lambda to proton pion, using a data sample corresponding to an integrated luminosity of 1.9 inverse femtobarns. The product of the cross section times the branching ratio for Lambda(b) to J/Psi Lambda versus pt(Lambda(b)) falls faster than that of b mesons. The measured value of the cross section times the branching ratio for pt(Lambda(b)) > 10 GeV and abs(y(Lambda(b))) < 2.0 is 1.06 +/- 0.06 +/- 0.12 nb, and the integrated cross section ratio for anti-Lambda(b)/Lambda(b) is 1.02 +/- 0.07 +/- 0.09, where the uncertainties are statistical and systematic, respectively.Comment: Submitted to Physics Letters

Search for new physics in events with opposite-sign leptons, jets, and missing transverse energy in pp collisions at sqrt(s) = 7 TeV

A search is presented for physics beyond the standard model (BSM) in final states with a pair of opposite-sign isolated leptons accompanied by jets and missing transverse energy. The search uses LHC data recorded at a center-of-mass energy sqrt(s) = 7 TeV with the CMS detector, corresponding to an integrated luminosity of approximately 5 inverse femtobarns. Two complementary search strategies are employed. The first probes models with a specific dilepton production mechanism that leads to a characteristic kinematic edge in the dilepton mass distribution. The second strategy probes models of dilepton production with heavy, colored objects that decay to final states including invisible particles, leading to very large hadronic activity and missing transverse energy. No evidence for an event yield in excess of the standard model expectations is found. Upper limits on the BSM contributions to the signal regions are deduced from the results, which are used to exclude a region of the parameter space of the constrained minimal supersymmetric extension of the standard model. Additional information related to detector efficiencies and response is provided to allow testing specific models of BSM physics not considered in this paper.Comment: Replaced with published version. Added journal reference and DO

Measurement of isolated photon production in pp and PbPb collisions at sqrt(sNN) = 2.76 TeV

Isolated photon production is measured in proton-proton and lead-lead collisions at nucleon-nucleon centre-of-mass energies of 2.76 TeV in the pseudorapidity range |eta|<1.44 and transverse energies ET between 20 and 80 GeV with the CMS detector at the LHC. The measured ET spectra are found to be in good agreement with next-to-leading-order perturbative QCD predictions. The ratio of PbPb to pp isolated photon ET-differential yields, scaled by the number of incoherent nucleon-nucleon collisions, is consistent with unity for all PbPb reaction centralities.Comment: Submitted to Physics Letters

Developing a predictive modelling capacity for a climate change-vulnerable blanket bog habitat: Assessing 1961-1990 baseline relationships

Aim: Understanding the spatial distribution of high priority habitats and developing predictive models using climate and environmental variables to replicate these distributions are desirable conservation goals. The aim of this study was to model and elucidate the contributions of climate and topography to the distribution of a priority blanket bog habitat in Ireland, and to examine how this might inform the development of a climate change predictive capacity for peat-lands in Ireland. Methods: Ten climatic and two topographic variables were recorded for grid cells with a spatial resolution of 1010 km, covering 87% of the mainland land surface of Ireland. Presence-absence data were matched to these variables and generalised linear models (GLMs) fitted to identify the main climatic and terrain predictor variables for occurrence of the habitat. Candidate predictor variables were screened for collinearity, and the accuracy of the final fitted GLM was evaluated using fourfold cross-validation based on the area under the curve (AUC) derived from a receiver operating characteristic (ROC) plot. The GLM predicted habitat occurrence probability maps were mapped against the actual distributions using GIS techniques. Results: Despite the apparent parsimony of the initial GLM using only climatic variables, further testing indicated collinearity among temperature and precipitation variables for example. Subsequent elimination of the collinear variables and inclusion of elevation data produced an excellent performance based on the AUC scores of the final GLM. Mean annual temperature and total mean annual precipitation in combination with elevation range were the most powerful explanatory variable group among those explored for the presence of blanket bog habitat. Main conclusions: The results confirm that this habitat distribution in general can be modelled well using the non-collinear climatic and terrain variables tested at the grid resolution used. Mapping the GLM-predicted distribution to the observed distribution produced useful results in replicating the projected occurrence of the habitat distribution over an extensive area. The methods developed will usefully inform future climate change predictive modelling for Irelan

Tides in colliding galaxies

Long tails and streams of stars are the most noticeable upshots of galaxy collisions. Their origin as gravitational, tidal, disturbances has however been recognized only less than fifty years ago and more than ten years after their first observations. This Review describes how the idea of galactic tides emerged, in particular thanks to the advances in numerical simulations, from the first ones that included tens of particles to the most sophisticated ones with tens of millions of them and state-of-the-art hydrodynamical prescriptions. Theoretical aspects pertaining to the formation of tidal tails are then presented. The third part of the review turns to observations and underlines the need for collecting deep multi-wavelength data to tackle the variety of physical processes exhibited by collisional debris. Tidal tails are not just stellar structures, but turn out to contain all the components usually found in galactic disks, in particular atomic / molecular gas and dust. They host star-forming complexes and are able to form star-clusters or even second-generation dwarf galaxies. The final part of the review discusses what tidal tails can tell us (or not) about the structure and content of present-day galaxies, including their dark components, and explains how tidal tails may be used to probe the past evolution of galaxies and their mass assembly history. On-going deep wide-field surveys disclose many new low-surface brightness structures in the nearby Universe, offering great opportunities for attempting galactic archeology with tidal tails.Comment: 46 pages, 13 figures, Review to be published in "Tidal effects in Astronomy and Astrophysics", Lecture Notes in Physics. Comments are most welcom