121 research outputs found
Status and Plans for the Array Control and Data Acquisition System of the Cherenkov Telescope Array
The Cherenkov Telescope Array (CTA) is the next-generation atmospheric
Cherenkov gamma-ray observatory. CTA will consist of two installations, one in
the northern, and the other in the southern hemisphere, containing tens of
telescopes of different sizes. The CTA performance requirements and the
inherent complexity associated with the operation, control and monitoring of
such a large distributed multi-telescope array leads to new challenges in the
field of the gamma-ray astronomy. The ACTL (array control and data acquisition)
system will consist of the hardware and software that is necessary to control
and monitor the CTA arrays, as well as to time-stamp, read-out, filter and
store -at aggregated rates of few GB/s- the scientific data. The ACTL system
must be flexible enough to permit the simultaneous automatic operation of
multiple sub-arrays of telescopes with a minimum personnel effort on site. One
of the challenges of the system is to provide a reliable integration of the
control of a large and heterogeneous set of devices. Moreover, the system is
required to be ready to adapt the observation schedule, on timescales of a few
tens of seconds, to account for changing environmental conditions or to
prioritize incoming scientific alerts from time-critical transient phenomena
such as gamma ray bursts. This contribution provides a summary of the main
design choices and plans for building the ACTL system.Comment: In Proceedings of the 34th International Cosmic Ray Conference
(ICRC2015), The Hague, The Netherlands. All CTA contributions at
arXiv:1508.0589
Embedded software developments in KM3NeT phase I
TheKM3NeT collaboration has already produced more than one thousand acquisition
boards, used for building two deep-sea neutrino detectors at the bottom of the Mediterranean Sea,
with the aim of instrumenting a volume of several cubic kilometers with light sensors to detect
the Cherenkov radiation produced in neutrino interactions. The so-called digital optical modules,
house the PMTs and the acquisition and control electronics of the module, the central logic board,
which includes a Xilinx FPGA and embedded soft processor. The present work presents the architecture and functionalities of the software embedded in the soft processor of the central logic
board
NectarCAM : a camera for the medium size telescopes of the Cherenkov Telescope Array
NectarCAM is a camera proposed for the medium-sized telescopes of the
Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV
to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the
heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog
to Digital converter. The camera will be equipped with 265 7-photomultiplier
modules, covering a field of view of 8 degrees. Each module includes the
photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and
Ethernet transceiver. The recorded events last between a few nanoseconds and
tens of nanoseconds. The camera trigger will be flexible so as to minimize the
read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data
rate of more than 4 kHz with less than 5\% dead time. The camera concept, the
design and tests of the various subcomponents and results of thermal and
electrical prototypes are presented. The design includes the mechanical
structure, cooling of the electronics, read-out, clock distribution, slow
control, data-acquisition, triggering, monitoring and services.Comment: In Proceedings of the 34th International Cosmic Ray Conference
(ICRC2015), The Hague, The Netherlands. All CTA contributions at
arXiv:1508.0589
Deep-sea deployment of the KM3NeT neutrino telescope detection units by self-unrolling
KM3NeT is a research infrastructure being installed in the deep Mediterranean Sea. It will house a neutrino telescope comprising hundreds of networked moorings — detection units or strings — equipped with optical instrumentation to detect the Cherenkov radiation generated by charged particles from neutrino-induced collisions in its vicinity. In comparison to moorings typically used for oceanography, several key features of the KM3NeT string are different: the instrumentation is contained in transparent and thus unprotected glass spheres; two thin Dyneema® ropes are used as strength members; and a thin delicate backbone tube with fibre-optics and copper wires for data and power transmission, respectively, runs along the full length of the mooring. Also, compared to other neutrino telescopes such as ANTARES in the Mediterranean Sea and GVD in Lake Baikal, the KM3NeT strings are more slender to minimise the amount of material used for support of the optical sensors. Moreover, the rate of deploying a large number of strings in a period of a few years is unprecedented. For all these reasons, for the installation of the KM3NeT strings, a custom-made, fast deployment method was designed. Despite the length of several hundreds of metres, the slim design of the string allows it to be compacted into a small, re-usable spherical launching vehicle instead of deploying the mooring weight down from a surface vessel. After being lowered to the seafloor, the string unfurls to its full length with the buoyant launching vehicle rolling along the two ropes. The design of the vehicle, the loading with a string, and its underwater self-unrolling are detailed in this paper
Deep sea tests of a prototype of the KM3NeT digital optical module
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deepwaters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same (40)Kdecay and the localisation of bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions
Deep-sea deployment of the KM3NeT neutrino telescope detection units by self-unrolling
KM3NeT is a research infrastructure being installed in the deep Mediterranean Sea.
It will house a neutrino telescope comprising hundreds of networked moorings — detection units
or strings — equipped with optical instrumentation to detect the Cherenkov radiation generated
by charged particles from neutrino-induced collisions in its vicinity. In comparison to moorings
typically used for oceanography, several key features of the KM3NeT string are different: the
instrumentation is contained in transparent and thus unprotected glass spheres; two thin Dyneema®
ropes are used as strength members; and a thin delicate backbone tube with fibre-optics and copper
wires for data and power transmission, respectively, runs along the full length of the mooring. Also,
compared to other neutrino telescopes such as ANTARES in the Mediterranean Sea and GVD in
Lake Baikal, the KM3NeT strings are more slender to minimise the amount of material used for
support of the optical sensors. Moreover, the rate of deploying a large number of strings in a period
of a few years is unprecedented. For all these reasons, for the installation of the KM3NeT strings,
a custom-made, fast deployment method was designed. Despite the length of several hundreds of
metres, the slim design of the string allows it to be compacted into a small, re-usable spherical
launching vehicle instead of deploying the mooring weight down from a surface vessel. After
being lowered to the seafloor, the string unfurls to its full length with the buoyant launching vehicle
rolling along the two ropes. The design of the vehicle, the loading with a string, and its underwater
self-unrolling are detailed in this paper.French National Research Agency (ANR)
ANR-15-CE31-0020Centre National de la Recherche Scientifique (CNRS)European Union (EU)Institut Universitaire de France (IUF)LabEx UnivEarthS
ANR-10-LABX-0023
ANR-18-IDEX-0001Paris Ile-de-France Region, FranceShota Rustaveli National Science Foundation of Georgia (SRNSFG), Georgia
FR-18-1268German Research Foundation (DFG)Greek Ministry of Development-GSRTIstituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Universita e della Ricerca (MUR), PRIN Italy
NAT-NET 2017W4HA7SMinistry of Higher Education, Scientific Research and Professional Training, MoroccoNetherlands Organization for Scientific Research (NWO)
Netherlands GovernmentNational Science Center, Poland
National Science Centre, Poland
2015/18/E/ST2/00758National Authority for Scientific Research (ANCS), RomaniaMinisterio de Ciencia, Innovación, Investigación y Universidades (MCIU): Programa Estatal de Generación de Conocimiento (MCIU/FEDER)
PGC2018-096663-B-C41
PGC2018-096663-B-A-C42
PGC2018-096663-B-BC43
PGC2018-096663-B-B-C44Severo Ochoa Centre of Excellence and MultiDark Consolider (MCIU), Junta de Andalucía
SOMM17/6104/UGRGeneralitat Valenciana
GRISOLIA/2018/119
CIDEGENT/2018/034La Caixa Foundation
LCF/BQ/IN17/11620019EU: MSC program, Spain
71367
The Control Unit of the KM3NeT Data Acquisition System
The KM3NeT Collaboration runs a multi-site neutrino observatory in the Mediterranean Sea. Water Cherenkov particle detectors, deep in the sea and far off the coasts of France and Italy, are already taking data while incremental construction progresses. Data Acquisition Control software is operating off-shore detectors as well as testing and qualification stations for their components. The software, named Control Unit, is highly modular. It can undergo upgrades and reconfiguration with the acquisition running. Interplay with the central database of the Collaboration is obtained in a way that allows for data taking even if Internet links fail. In order to simplify the management of computing resources in the long term, and to cope with possible hardware failures of one or more computers, the KM3NeT Control Unit software features a custom dynamic resource provisioning and failover technology, which is especially important for ensuring continuity in case of rare transient events in multi-messenger astronomy. The software architecture relies on ubiquitous tools and broadly adopted technologies and has been successfully tested on several operating systems
Letter of intent for KM3NeT 2.0
The main objectives of the KM3NeT Collaboration are
(
i
)
the discovery and
subsequent observation of high-energy neutrino sources in the Universe and
(
ii
)
the determination of the mass hierarchy of neutrinos. These objectives are
strongly motivated by two recent important discoveries, namely:
(
1
)
the high-
energy astrophysical neutrino signal reported by IceCube and
(
2
)
the sizable
contribution of electron neutrinos to the third neutrino mass eigenstate as
reported by Daya Bay, Reno and others. To meet these objectives, the
KM3NeT Collaboration plans to build a new Research Infrastructure con-
sisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea.
A phased and distributed implementation is pursued which maximises the
access to regional funds, the availability of human resources and the syner-
gistic opportunities for the Earth and sea sciences community. Three suitable
deep-sea sites are selected, namely off-shore Toulon
(
France
)
, Capo Passero
(
Sicily, Italy
)
and Pylos
(
Peloponnese, Greece
)
. The infrastructure will consist
of three so-called building blocks. A building block comprises 115 strings,
each string comprises 18 optical modules and each optical module comprises
31 photo-multiplier tubes. Each building block thus constitutes a three-
dimensional array of photo sensors that can be used to detect the Cherenkov
light produced by relativistic particles emerging from neutrino interactions.
Two building blocks will be sparsely con
fi
gured to fully explore the IceCube
signal with similar instrumented volume, different methodology, improved
resolution and complementary
fi
eld of view, including the galactic plane. One
building block will be densely con
fi
gured to precisely measure atmospheric
neutrino oscillations.
Original content from this work may be used under the ter
Dependence of atmospheric muon flux on seawater depth measured with the first KM3NeT detection units: The KM3NeT Collaboration
KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV–PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The first KM3NeT detection units were deployed at the Italian and French sites between 2015 and 2017. In this paper, a description of the detector is presented, together with a summary of the procedures used to calibrate the detector in-situ. Finally, the measurement of the atmospheric muon flux between 2232–3386 m seawater depth is obtained
- …