Effect of atrazine applications on weed growth and yield at different irrigation levels in corn (Zea mays L.) growth

Corn (Zea mays L.), for silage, is very important in animal feeding because winter seasonal conditions last longer in Eastern Turkey. Corn yield components were investigated in plots, in which herbicide had been applied and also not applied at different irrigation levels in this study. The study lasted for two years and soil-water content was kept at five different levels [96% (I-1), 63% (I-2), 32% (I-3), 15% (I-4) and 4% (I-5)]. The species and intensities of the weeds at the irrigation levels were determined in the study. Plant length, green and dry herbage yields, leaf, stem and ear ratios were studied as criteria for corn yield. At the same irrigation levels, higher efficiency values were determined according to non applied plots in the atrazine applied plots. In both years, the lowest green herbage and dry herbage yields were determined at I-4 and I-5 irrigation levels. The weeds that are mostly seen on the plots, in which atrazine had not been applied are Alopecurus myosuroides Huds. and Sinapis arvensis L, respectively. Similarly, for both years, high densities of weeds were observed in the highly moisturized lands. The atrazine activities increased at the I-1 and I-2 irrigation levels in which water content of the soil is high.Key words: Corn, weeds, soil moisture, atrazine, corn yield

Fuzzy Integral Based Multi-Sensor Fusion for Arc Detection in the Pantograph-Catenary System

The pantograph-catenary subsystem is a fundamental component of a railway train since it provides the traction electrical power. A bad operating condition or, even worse, a failure can disrupt the railway traffic creating economic damages and, in some cases, serious accidents. Therefore, the correct operation of such subsystems should be ensured in order to have an economically efficient, reliable and safe transportation system. In this study, a new arc detection method was proposed and is based on features from the current and voltage signals collected by the pantograph. A tool named mathematical morphology is applied to voltage and current signals to emphasize the effect of the arc, before applying the fast Fourier transform to obtain the power spectrum. Afterwards, three support vector machine-based classifiers are trained separately to detect the arcs, and a fuzzy integral technique is used to synthesize the results obtained by the individual classifiers, therefore implementing a classifier fusion technique. The experimental results show that the proposed approach is effective for the detection of arcs, and the fusion of classifier has a higher detection accuracy than any individual classifier

Effect of Ag2O addition on the intergranular properties of the superconducting Bi–(Pb)–Sr–Ca–Cu–O system

The effect of Ag2O addition on the Bi–(Pb)–Sr–Ca–Cu–O system has been investigated in terms of ac susceptibility, phase evolution, critical current density and critical temperature. It was found that as the amount of Ag2O addition increases, the intergranular critical current density decreases in our samples (Bi1.84Pb0.34Sr1.91Ca2.03Cu3.06O10) fabricated by ammonium nitrate technique. The analysis for comparison is based on the suppression degree of the diamagnetic behaviour with respect to fields, rapid or slow shift of the summit in χ'(T) to lower temperature with increasing field amplitude and the sharpness of the transition of χ'(T) for intergranular component for the same field amplitude. We also qualitatively discuss experimental results in the framework of the critical state model. The room temperature XRD diagram indicates the presence of large amount of high-Tc (2223) phase. The percentage of Bi-2223 phase in the phase mixture was estimated from the intensities of high-Tc (2223) and low-Tc (2212) phase peaks as 78% for the pure BSCCO sample. Among the Ag2O-added BSCCO samples studied, the one in which 5 wt%Ag2O was added shows the highest rate of Bi-2223 formation as 92%. The SEM analysis reveals some morphological changes induced by silver addition

Cognitive-radio systems for spectrum, location, and environmental awareness

In order to perform reliable communications, a system needs to have sufficient information about its operational environment, such as spectral resources and propagation characteristics. Cognitive-radio technology has capabilities for acquiring accurate spectrum, location, and environmental information, due to its unique features such as spectrum, location, and environmental awareness. The goal of this paper is to give a comprehensive review of the implementation of these concepts. In addition, the dynamic nature of cognitive-radio systems - including dynamic spectrum utilization, transmission, the propagation channel, and reception - is discussed, along with performance limits, challenges, mitigation techniques, and open issues. The capabilities of cognitive-radio systems for accurate characterization of operational environments are emphasized. These are crucial for efficient communications, localization, and radar systems. © 2010 IEEE

Content-Based Image Retrieval of Skin Lesions by Evolutionary Feature Synthesis

Abstract. This paper gives an example of evolved features that improve image retrieval performance. A content-based image retrieval system for skin lesion images is presented. The aim is to support decision making by retrieving and displaying relevant past cases visually similar to the one under examination. Skin lesions of five common classes, including two non-melanoma cancer types, are used. Colour and texture features are extracted from lesions. Evolutionary algorithms are used to create composite features that optimise a similarity matching function. Experiments on our database of 533 images are performed and results are compared to those obtained using simple features. The use of the evolved composite features improves the precision by about 7%.

Lesion detection in demoscopy images with novel density-based and active contour approaches

<p>Abstract</p> <p>Background</p> <p>Dermoscopy is one of the major imaging modalities used in the diagnosis of melanoma and other pigmented skin lesions. Automated assessment tools for dermoscopy images have become an important field of research mainly because of inter- and intra-observer variations in human interpretation. One of the most important steps in dermoscopy image analysis is the detection of lesion borders, since many other features, such as asymmetry, border irregularity, and abrupt border cutoff, rely on the boundary of the lesion. </p> <p>Results</p> <p>To automate the process of delineating the lesions, we employed Active Contour Model (ACM) and boundary-driven density-based clustering (BD-DBSCAN) algorithms on 50 dermoscopy images, which also have ground truths to be used for quantitative comparison. We have observed that ACM and BD-DBSCAN have the same border error of 6.6% on all images. To address noisy images, BD-DBSCAN can perform better delineation than ACM. However, when used with optimum parameters, ACM outperforms BD-DBSCAN, since ACM has a higher recall ratio.</p> <p>Conclusion</p> <p>We successfully proposed two new frameworks to delineate suspicious lesions with i) an ACM integrated approach with sharpening and ii) a fast boundary-driven density-based clustering technique. ACM shrinks a curve toward the boundary of the lesion. To guide the evolution, the model employs the exact solution <abbrgrp><abbr bid="B27">27</abbr></abbrgrp> of a specific form of the Geometric Heat Partial Differential Equation <abbrgrp><abbr bid="B28">28</abbr></abbrgrp>. To make ACM advance through noisy images, an improvement of the model’s boundary condition is under consideration. BD-DBSCAN improves regular density-based algorithm to select query points intelligently.</p

Linear, Deterministic, and Order-Invariant Initialization Methods for the K-Means Clustering Algorithm

Over the past five decades, k-means has become the clustering algorithm of choice in many application domains primarily due to its simplicity, time/space efficiency, and invariance to the ordering of the data points. Unfortunately, the algorithm's sensitivity to the initial selection of the cluster centers remains to be its most serious drawback. Numerous initialization methods have been proposed to address this drawback. Many of these methods, however, have time complexity superlinear in the number of data points, which makes them impractical for large data sets. On the other hand, linear methods are often random and/or sensitive to the ordering of the data points. These methods are generally unreliable in that the quality of their results is unpredictable. Therefore, it is common practice to perform multiple runs of such methods and take the output of the run that produces the best results. Such a practice, however, greatly increases the computational requirements of the otherwise highly efficient k-means algorithm. In this chapter, we investigate the empirical performance of six linear, deterministic (non-random), and order-invariant k-means initialization methods on a large and diverse collection of data sets from the UCI Machine Learning Repository. The results demonstrate that two relatively unknown hierarchical initialization methods due to Su and Dy outperform the remaining four methods with respect to two objective effectiveness criteria. In addition, a recent method due to Erisoglu et al. performs surprisingly poorly.Comment: 21 pages, 2 figures, 5 tables, Partitional Clustering Algorithms (Springer, 2014). arXiv admin note: substantial text overlap with arXiv:1304.7465, arXiv:1209.196

Analysis of density based and fuzzy c-means clustering methods on lesion border extraction in dermoscopy images

<p>Abstract</p> <p>Background</p> <p>Computer-aided segmentation and border detection in dermoscopic images is one of the core components of diagnostic procedures and therapeutic interventions for skin cancer. Automated assessment tools for dermoscopy images have become an important research field mainly because of inter- and intra-observer variations in human interpretation. In this study, we compare two approaches for automatic border detection in dermoscopy images: density based clustering (DBSCAN) and Fuzzy C-Means (FCM) clustering algorithms. In the first approach, if there exists enough density –greater than certain number of points- around a point, then either a new cluster is formed around the point or an existing cluster grows by including the point and its neighbors. In the second approach FCM clustering is used. This approach has the ability to assign one data point into more than one cluster.</p> <p>Results</p> <p>Each approach is examined on a set of 100 dermoscopy images whose manually drawn borders by a dermatologist are used as the ground truth. Error rates; false positives and false negatives along with true positives and true negatives are quantified by comparing results with manually determined borders from a dermatologist. The assessments obtained from both methods are quantitatively analyzed over three accuracy measures: border error, precision, and recall. </p> <p>Conclusion</p> <p>As well as low border error, high precision and recall, visual outcome showed that the DBSCAN effectively delineated targeted lesion, and has bright future; however, the FCM had poor performance especially in border error metric.</p

Computational Methods for Pigmented Skin Lesion Classification in Images: Review and Future Trends

Skin cancer is considered as one of the most common types of cancer in several countries, and its incidence rate has increased in recent years. Melanoma cases have caused an increasing number of deaths worldwide, since this type of skin cancer is the most aggressive compared to other types. Computational methods have been developed to assist dermatologists in early diagnosis of skin cancer. An overview of the main and current computational methods that have been proposed for pattern analysis and pigmented skin lesion classification is addressed in this review. In addition, a discussion about the application of such methods, as well as future trends, is also provided. Several methods for feature extraction from both macroscopic and dermoscopic images and models for feature selection are introduced and discussed. Furthermore, classification algorithms and evaluation procedures are described, and performance results for lesion classification and pattern analysis are given

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13