357 research outputs found
High rate, fast timing Glass RPC for the high {\eta} CMS muon detectors
The HL-LHC phase is designed to increase by an order of magnitude the amount
of data to be collected by the LHC experiments. To achieve this goal in a
reasonable time scale the instantaneous luminosity would also increase by an
order of magnitude up to . The region of the forward
muon spectrometer () is not equipped with RPC stations. The
increase of the expected particles rate up to (including a
safety factor 3) motivates the installation of RPC chambers to guarantee
redundancy with the CSC chambers already present. The actual RPC technology of
CMS cannot sustain the expected background level. The new technology that will
be chosen should have a high rate capability and provides a good spatial and
timing resolution. A new generation of Glass-RPC (GRPC) using low-resistivity
(LR) glass is proposed to equip at least the two most far away of the four high
muon stations of CMS. First the design of small size prototypes and
studies of their performance in high-rate particles flux is presented. Then the
proposed designs for large size chambers and their fast-timing electronic
readout are examined and preliminary results are provided.Comment: 14 pages, 11 figures, Conference proceeding for the 2016 Resistive
Plate Chambers and Related Detector
Performance of Resistive Plate Chambers installed during the first long shutdown of the CMS experiment
The CMS experiment, located at the CERN Large Hadron Collider, has a
redundant muon system composed by three different detector technologies:
Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central
region) and Resistive Plate Chambers (both its central and forward regions).
All three are used for muon reconstruction and triggering. During the first
long shutdown (LS1) of the LHC (2013-2014) the CMS muon system has been
upgraded with 144 newly installed RPCs on the forth forward stations. The new
chambers ensure and enhance the muon trigger efficiency in the high luminosity
conditions of the LHC Run2. The chambers have been successfully installed and
commissioned. The system has been run successfully and experimental data has
been collected and analyzed. The performance results of the newly installed
RPCs will be presented.Comment: 5 pages, 6 figures, proceeding to The XIII workshop on Resistive
Plate Chambers and Related Detectors (RPC2016
RPC upgrade project for CMS Phase II
The Muon Upgrade Phase II of the Compact Muon Solenoid (CMS) aims to guarantee the optimal conditions of the present system and extend the eta coverage to ensure a reliable system for the High Luminosity Large Hadron Collider (HL-LHC) period. The Resistive Plate Chambers (RPCs) system will upgrade the off-detector electronics (called link system) of the chambers currently installed chambers and place improved RPCs (iRPCs) to cover the high pseudo-rapidity region, a challenging region for muon reconstruction in terms of background and momentum resolution. In order to find the best option for the iRPCs, an R&D program for new detectors was performed and real size prototypes have been tested in the Gamma Irradiation Facility (GIF++) at CERN. The results indicated that the technology suitable for the high background conditions is based on High Pressure Laminate (HPL) double-gap RPC. The RPC Upgrade Phase II program is planned to be ready after the Long Shutdown 3 (LS3)
High voltage calibration method for the CMS RPC detector
The Resistive Plate Chambers (RPC) are used for muon triggers in the CMS experiment. To calibrate the high voltage working-points (WP) and identify degraded detectors due to radiation or chemical damage, a high voltage scan has been performed using 2017 data from pp collisions at a center-of-mass energy of 13 TeV. In this paper, we present the calibration method and the latest results obtained for the 2017 data. A comparison with all scans taken since 2011 is considered to investigate the stability of the detector performance in time
CMSRPC efficiency measurement using the tag-and-probe method
We measure the efficiency of CMS Resistive Plate Chamber (RPC) detectors in proton-proton collisions at the centre-of-mass energy of 13 TeV using the tag-and-probe method. A muon from a Z(0) boson decay is selected as a probe of efficiency measurement, reconstructed using the CMS inner tracker and the rest of CMS muon systems. The overall efficiency of CMS RPC chambers during the 2016-2017 collision runs is measured to be more than 96% for the nominal RPC chambers
The CMS RPC detector performance and stability during LHC RUN-2
The CMS experiment, located at the Large Hadron Collider (LHC) in CERN, has a redundant muon system composed by three different gaseous detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region), and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. The CMS RPC system confers robustness and redundancy to the muon trigger. The RPC system operation in the challenging background and pileup conditions of the LHC environment is presented. The RPC system provides information to all muon track finders and thus contributing to both muon trigger and reconstruction. The summary of the detector performance results obtained with proton-proton collision at root s = 13 TeV during 2016 and 2017 data taking have been presented. The stability of the system is presented in terms of efficiency and cluster size vs time and increasing instantaneous luminosity. Data-driven predictions about the expected performance during High Luminosity LHC (HL-LHC) stage have been reported
RPC radiation background simulations for the high luminosity phase in the CMS experiment
The high luminosity expected from the HL-LHC will be a challenge for the CMS detector. The increased rate of particles coming from the collisions and the radioactivity induced in the detector material could cause significant damage and result in a progressive degradation of its performance. Simulation studies are very useful in these scenarios as they allow one to study the radiation environment and the impact on detector performance. Results are presented for CMS RPC stations considering the operating conditions expected at the HL-LHC
Transcriptional responses of ecologically diverse drosophila species to larval diets differing in relative sugar and protein ratios
We utilized three ecologically diverse Drosophila species to explore the influence of ecological adaptation on transcriptomic responses to isocaloric diets differing in their relative proportions of protein to sugar. Drosophila melanogaster, a cosmopolitan species that breeds in decaying fruit, exemplifies individuals long exposed to a Western diet higher in sugar, while the natural diet of the cactophilic D. mojavensis, is much lower in carbohydrates. Drosophila arizonae, the sister species of D. mojavensis, is largely cactophilic, but also utilizes rotting fruits that are higher in sugars than cacti. We exposed third instar larvae for 24 hours to diets either (1) high in protein relative to sugar, (2) diets with equal amounts of protein and sugar, and (3) diets low in protein but high in sugar. As we predicted, based upon earlier interspecific studies of development and metabolism, the most extreme differences in gene expression under different dietary conditions were found in D. mojavensis followed by D. arizonae. No differential expression among diets was observed for D. melanogaster, a species that survives well under all three conditions, with little impact on its metabolism. We suggest that these three species together provide a model to examine individual and population differences in vulnerability to lifestyle-associated health problems such as metabolic syndrome and diabetes
Search for new physics with dijet angular distributions in proton-proton collisions at root S = 13 TeV
Peer reviewe
- …