Surface acoustic wave driven ferromagnetic resonance in (Ga,Mn)(As,P) epilayers

Interdigitated transducers were used to generate and detect surface acoustic waves on a thin layer of (Ga,Mn)(As,P). The out-of-plane uniaxial magnetic anisotropy of this dilute magnetic semiconductor is very sensitive to the strain of the layer, making it an ideal test material for the dynamic control of magnetization via magneto-striction. The time-domain measurement of the amplitude and phase of the transmitted SAW during magnetic field sweeps indicated a clear resonant behavior at a field close to the one calculated to give a precession frequency equal to the SAW frequency. A resonance was observed from 5K to 85K, just below the Curie temperature of the layer. A full analytical treatment of the coupled magnetization/acoustic dynamics showed that the magneto-strictive coupling modifies the elastic constants of the material and accordingly the wave-vector solution to the elastic wave equation. The shape and position of the resonance were well reproduced by the calculations, in particular the fact that velocity (phase) variations resonated at lower fields than the acoustic attenuation variations

Measurement of the Splitting Function in &ITpp &ITand Pb-Pb Collisions at root&ITsNN&IT=5.02 TeV

Data from heavy ion collisions suggest that the evolution of a parton shower is modified by interactions with the color charges in the dense partonic medium created in these collisions, but it is not known where in the shower evolution the modifications occur. The momentum ratio of the two leading partons, resolved as subjets, provides information about the parton shower evolution. This substructure observable, known as the splitting function, reflects the process of a parton splitting into two other partons and has been measured for jets with transverse momentum between 140 and 500 GeV, in pp and PbPb collisions at a center-of-mass energy of 5.02 TeV per nucleon pair. In central PbPb collisions, the splitting function indicates a more unbalanced momentum ratio, compared to peripheral PbPb and pp collisions.. The measurements are compared to various predictions from event generators and analytical calculations.Peer reviewe

Measurement of nuclear modification factors of gamma(1S)), gamma(2S), and gamma(3S) mesons in PbPb collisions at root s(NN)=5.02 TeV

The cross sections for ϒ(1S), ϒ(2S), and ϒ(3S) production in lead-lead (PbPb) and proton-proton (pp) collisions at √sNN = 5.02 TeV have been measured using the CMS detector at the LHC. The nuclear modification factors, RAA, derived from the PbPb-to-pp ratio of yields for each state, are studied as functions of meson rapidity and transverse momentum, as well as PbPb collision centrality. The yields of all three states are found to be significantly suppressed, and compatible with a sequential ordering of the suppression, RAA(ϒ(1S)) > RAA(ϒ(2S)) > RAA(ϒ(3S)). The suppression of ϒ(1S) is larger than that seen at √sNN = 2.76 TeV, although the two are compatible within uncertainties. The upper limit on the RAA of ϒ(3S) integrated over pT, rapidity and centrality is 0.096 at 95% confidence level, which is the strongest suppression observed for a quarkonium state in heavy ion collisions to date. © 2019 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). Funded by SCOAP3.Peer reviewe

Electroweak production of two jets in association with a Z boson in proton-proton collisions root s =13 TeV

A measurement of the electroweak (EW) production of two jets in association with a Z boson in proton-proton collisions at root s = 13 TeV is presented, based on data recorded in 2016 by the CMS experiment at the LHC corresponding to an integrated luminosity of 35.9 fb(-1). The measurement is performed in the lljj final state with l including electrons and muons, and the jets j corresponding to the quarks produced in the hard interaction. The measured cross section in a kinematic region defined by invariant masses m(ll) > 50 GeV, m(jj) > 120 GeV, and transverse momenta P-Tj > 25 GeV is sigma(EW) (lljj) = 534 +/- 20 (stat) fb (syst) fb, in agreement with leading-order standard model predictions. The final state is also used to perform a search for anomalous trilinear gauge couplings. No evidence is found and limits on anomalous trilinear gauge couplings associated with dimension-six operators are given in the framework of an effective field theory. The corresponding 95% confidence level intervals are -2.6 <cwww/Lambda(2) <2.6 TeV-2 and -8.4 <cw/Lambda(2) <10.1 TeV-2. The additional jet activity of events in a signal-enriched region is also studied, and the measurements are in agreement with predictions.Peer reviewe

Inclusive Search for a Highly Boosted Higgs Boson Decaying to a Bottom Quark-Antiquark Pair

© 2018 CERN. An inclusive search for the standard model Higgs boson (H) produced with large transverse momentum (pT) and decaying to a bottom quark-antiquark pair (bb) is performed using a data set of pp collisions at s=13 TeV collected with the CMS experiment at the LHC. The data sample corresponds to an integrated luminosity of 35.9 fb-1. A highly Lorentz-boosted Higgs boson decaying to bb is reconstructed as a single, large radius jet, and it is identified using jet substructure and dedicated b tagging techniques. The method is validated with Z→bb decays. The Z→bb process is observed for the first time in the single-jet topology with a local significance of 5.1 standard deviations (5.8 expected). For a Higgs boson mass of 125 GeV, an excess of events above the expected background is observed (expected) with a local significance of 1.5 (0.7) standard deviations. The measured cross section times branching fraction for production via gluon fusion of H→bb with reconstructed pT > 450 GeV and in the pseudorapidity range -2.5 < η < 2.5 is 74±48(stat)-10+17(syst) fb, which is consistent within uncertainties with the standard model prediction

Production of thick Gd freestanding films for energy conversion applications

International audienceThe use of magnetocaloric material in microelectromechanical energy conversion devices requires freestanding films with smooth surfaces to allow fast and efficient heat transfer. We present and discuss a mechanical method to produce freestanding thick Gadolinium films showing excellent magnetic properties, and high-quality surfaces on both sides. Polycrystalline Gd films have been prepared by sputtering on a silicon substrate with a thermally oxidized layer with different thicknesses. Films have been grown at 543 K. Tantalum and Tungsten have been used as buffer layers because of their corrosion resistance and of their thermal conductivity. The magnetic and surface properties of the freestanding films are presented, with special focus on the role of using different capping layers. Full characterizations of the three freestanding Gd films, including AFM measured surface roughness, XRD patterns, Curie temperature, thermo-magnetic curves, and maximum entropy change, are presented and discussed

Selective Manipulation of Microscopic Particles with Precursor Swirling Rayleigh Waves

International audienceContactless manipulation of microparticles is demonstrated with single-beam acoustical tweezers based on precursor swirling Rayleigh waves. These surface waves degenerate into acoustical vortices when crossing a stack made of a fluid layer and its solid support, hence creating a localized acoustical trap in a fluid cavity. They can be synthesized with a single interdigitated transducer whose spiraling shape encodes the phase of the field like a hologram. For applications, these tweezers have many attractive features: they are selective, flat, easily integrable, and compatible with disposable substrates

Selective manipulation of microscopic particles with swirling Rayleigh waves

Acoustical vortices offer tremendous perspective for dexterous contactless manipulation. In order to fulfill their potential of selective though label-free biocompatible tweezers, they must nonetheless become flat, smaller and easily integrable with disposable substrates. In this letter, we synthesize acoustic vortices using an integrated transducer by solving an inverse problem. We then capture and pattern tens of 30 µm particles on disposable substrates. Finally, we compare the forces applied by our vortices to theoretical calculations. This technology offers numerous prospects for micro-fabrication and cell-printing. High precision contactless manipulation offers tremendous perspectives for biophysical investigations and breakthroughs such as biological cell printing. A large span of methods using magnetic [1, 2], optical [3, 4], electrical [5] and acoustical forces [6, 7], and their combination [8] have been proposed. Among these techniques, acoustic tweezers stand out for cell manipulation applications as they combine high bio-compatibility [9], label-free manipulation [10], relatively low cost and disposable parts for minimized sample contamination [11]. One approach to capture individual particles relies on an ultra-sonic beam in the Mie scattering regime (particle size >> wavelength) [12]. Herein, very high frequencies (between 100 MHz and 1 GHz) are required to achieve selective manipulation, resulting in a deleterious heating of the manipulated sample [13] and the need of high-end electronics