The AIDA-2020 TLU:a flexible trigger logic unit for test beam facilities

The AIDA-2020 Trigger Logic Unit (TLU) has been designed to be a flexible and easily configurable unit to provide trigger and control signals to devices employed during test beams, integrating them with the beam telescope. The most recent iteration of the TLU (v1E) has been re-designed within the AIDA-2020 project to integrate with hardware used in beam facilities. Configuration and communication with the TLU are performed over Ethernet. It can be employed as a stand-alone unit or be deployed as part of the EUDAQ2 data acquisition framework, which allows it to connect to a wide range of LHC readout systems. The TLU can operate with a sustained particle rate of 1 MHz and with instantaneous rates up to 20 MHz. In the current firmware iteration, the unit can time-stamp incoming signals with a resolution of 1.5 ns. The hardware, firmware and software designs of the TLU are freely accessible and benefit from constant inputs and upgrades from experienced users. TLU units have already been deployed successfully in beam lines at CERN and DESY

Thermal lens spectrometry to study complex fluids

We describe applications of Thermal Lens Spectrometry to study optical and thermal properties of lyotropic liquid crystal. In particular, we refer to methods for measurements of thermal diffusivity anisotropy at different temperatures and as a function of the ferrofluids doping. The theoretical basis for quantitative measurements is discussed together with the advantages and limitations as compared with conventional methods. Finally, future developments of photothermal techniques for these applications are assessed.0000Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES

Re-carbonized vitreous carbon substrates for optical applications

Imaging optical systems components for satellites must have low specific mass and high stiffness, as weight is a problem for payloads and stiffness is essential to keep the substrate front surface shape. In this work, Re-carbonized Vitreous Carbon (RVC) was tested as a substrate material. The process to obtain RVC is different from the traditional process to obtain the Monolithic Vitreous Carbon (MVC). It is essential to understand the process to evaluate the surface roughness data. This work describes the process to obtain RVC, as a candidate for optical component substrate, and the results of its surface roughness measurements60523rd Congress of the International Commission for Optics (ICO

True absolute determination of photoluminescence quantum yields by coupling multiwavelength thermal lens and photoluminescence spectroscopies

© Royal Society of Chemistry 2020. This is the accepted manuscript version of an article which has been published in final form at https://dx.doi.org/10.1039/D0CP03794J.Photoluminescence quantum yields denote a critical variable to characterise a fluorophore and its potential performance. Their determination, by means of methodologies employing reference standard materials, innevitably leads to large uncertainties. In response to this, herein we report for the first time an innovative and elegant methodology, whereby the use of neat solvent/reference material required by thermal lens approaches is eliminated by coupling it to photoluminescence spectroscopy, allowing for the discrimination between materials with similar photoluminescence quantum yields. To achieve that, both radiative and non-radiative transitions are simultaneously measured by means of a photoluminescence spectrometer coupled to a multiwavelength thermal lens spectroscopy setup in a mode-mismatched dual-beam configuration, respectively. The absorption factor independent ratio of the thermal lens and photoluminescence signals can then be used to determine the fluorescence quantum yield both accurately and precisely. We validated our reported method by means of rhodamine 6G and further applied in three novel structurally related diketopyrrolopyrrole based materials to, contrary to results obtained by other methods, unveil significant differences in their photoluminescence quantum yields.Peer reviewe

Influence of Edge Effects on Laser-Induced Surface Displacement of Opaque Materials by Photothermal Interferometry

We demonstrate the influence of edge effects on the photothermal-induced phase shift measured by a homodyne quadrature laser interferometer and compare the experiments with rigorous theoretical descriptions of thermoelastic surface displacement of metals. The finite geometry of the samples is crucial in determining how the temperature is distributed across the material and how this affects the interferometer phase shift measurements. The optical path change due to the surface thermoelastic deformation and thermal lens in the surrounding air is decoded from the interferometric signal using analytical and numerical tools. The boundary/edge effects are found to be relevant to properly describe the interferometric signals. The tools developed in this study provide a framework for the study of finite size effects in heat transport in opaque materials and are applicable to describe not only the phase shift sensed by the interferometer but also to contribute to the photothermal-based technologies employing similar detection mechanisms

Observation of two new Ξb−\Xi_b^- baryon resonances

Two structures are observed close to the kinematic threshold in the $\Xi_b^0 \pi^-$ mass spectrum in a sample of proton-proton collision data, corresponding to an integrated luminosity of 3.0 fb$^{-1}$ recorded by the LHCb experiment. In the quark model, two baryonic resonances with quark content $bds$ are expected in this mass region: the spin-parity $J^P = \frac{1}{2}^+$ and $J^P=\frac{3}{2}^+$ states, denoted $\Xi_b^{\prime -}$ and $\Xi_b^{*-}$. Interpreting the structures as these resonances, we measure the mass differences and the width of the heavier state to be $m(\Xi_b^{\prime -}) - m(\Xi_b^0) - m(\pi^{-}) = 3.653 \pm 0.018 \pm 0.006$ MeV$/c^2$, $m(\Xi_b^{*-}) - m(\Xi_b^0) - m(\pi^{-}) = 23.96 \pm 0.12 \pm 0.06$ MeV$/c^2$, $\Gamma(\Xi_b^{*-}) = 1.65 \pm 0.31 \pm 0.10$ MeV, where the first and second uncertainties are statistical and systematic, respectively. The width of the lighter state is consistent with zero, and we place an upper limit of $\Gamma(\Xi_b^{\prime -}) < 0.08$ MeV at 95% confidence level. Relative production rates of these states are also reported.Comment: 17 pages, 2 figure

Search for New Physics with Jets and Missing Transverse Momentum in pp collisions at sqrt(s) = 7 TeV

A search for new physics is presented based on an event signature of at least three jets accompanied by large missing transverse momentum, using a data sample corresponding to an integrated luminosity of 36 inverse picobarns collected in proton--proton collisions at sqrt(s)=7 TeV with the CMS detector at the LHC. No excess of events is observed above the expected standard model backgrounds, which are all estimated from the data. Exclusion limits are presented for the constrained minimal supersymmetric extension of the standard model. Cross section limits are also presented using simplified models with new particles decaying to an undetected particle and one or two jets