14,801 research outputs found
Handling of a constrained flexible object by a robot
ç§ç èČ»ć ±ćæžćéČè«æ(èȘČéĄçȘć·:07455416ă»ćșç€ç 究(B)(2)ă»H7ïœH9/ç ç©¶ä»ŁèĄšè
:ć
ć±±, ć/ăăŹăă·ăă«ćè
ăăăăăźćèȘżć¶ćŸĄă«éąăăç 究
Control strategy for cooperating disparate manipulators
To manipulate large payloads typical of space construction, the concept of a small arm mounted on the end of a large arm is introduced. The main purposes of such a configuration are to increase the structural stiffness of the robot by bracing against or locking to a stationary frame, and to maintain a firm position constraint between the robot's base and workpieces by grasping them. Possible topologies for a combination of disparate large and small arms are discussed, and kinematics, dynamics, controls, and coordination of the two arms, especially when they brace at the tip of the small arm, are developed. The feasibility and improvement in performance are verified, not only with analytical work and simulation results but also with experiments on the existing arrangement Robotic Arm Large and Flexible and Small Articulated Manipulator
A Multi-Robot Cooperation Framework for Sewing Personalized Stent Grafts
This paper presents a multi-robot system for manufacturing personalized
medical stent grafts. The proposed system adopts a modular design, which
includes: a (personalized) mandrel module, a bimanual sewing module, and a
vision module. The mandrel module incorporates the personalized geometry of
patients, while the bimanual sewing module adopts a learning-by-demonstration
approach to transfer human hand-sewing skills to the robots. The human
demonstrations were firstly observed by the vision module and then encoded
using a statistical model to generate the reference motion trajectories. During
autonomous robot sewing, the vision module plays the role of coordinating
multi-robot collaboration. Experiment results show that the robots can adapt to
generalized stent designs. The proposed system can also be used for other
manipulation tasks, especially for flexible production of customized products
and where bimanual or multi-robot cooperation is required.Comment: 10 pages, 12 figures, accepted by IEEE Transactions on Industrial
Informatics, Key words: modularity, medical device customization, multi-robot
system, robot learning, visual servoing, robot sewin
A Multi-Robot Cooperation Framework for Sewing Personalized Stent Grafts
This paper presents a multi-robot system for manufacturing personalized
medical stent grafts. The proposed system adopts a modular design, which
includes: a (personalized) mandrel module, a bimanual sewing module, and a
vision module. The mandrel module incorporates the personalized geometry of
patients, while the bimanual sewing module adopts a learning-by-demonstration
approach to transfer human hand-sewing skills to the robots. The human
demonstrations were firstly observed by the vision module and then encoded
using a statistical model to generate the reference motion trajectories. During
autonomous robot sewing, the vision module plays the role of coordinating
multi-robot collaboration. Experiment results show that the robots can adapt to
generalized stent designs. The proposed system can also be used for other
manipulation tasks, especially for flexible production of customized products
and where bimanual or multi-robot cooperation is required.Comment: 10 pages, 12 figures, accepted by IEEE Transactions on Industrial
Informatics, Key words: modularity, medical device customization, multi-robot
system, robot learning, visual servoing, robot sewin
An advanced telerobotic system for shuttle payload changeout room processing applications
To potentially alleviate the inherent difficulties in the ground processing of the Space Shuttle and its associated payloads, a teleoperated, semi-autonomous robotic processing system for the Payload Changeout Room (PCR) is now in the conceptual stages. The complete PCR robotic system as currently conceived is described and critical design issues and the required technologies are discussed
Towards Python-based Domain-specific Languages for Self-reconfigurable Modular Robotics Research
This paper explores the role of operating system and high-level languages in
the development of software and domain-specific languages (DSLs) for
self-reconfigurable robotics. We review some of the current trends in
self-reconfigurable robotics and describe the development of a software system
for ATRON II which utilizes Linux and Python to significantly improve software
abstraction and portability while providing some basic features which could
prove useful when using Python, either stand-alone or via a DSL, on a
self-reconfigurable robot system. These features include transparent socket
communication, module identification, easy software transfer and reliable
module-to-module communication. The end result is a software platform for
modular robots that where appropriate builds on existing work in operating
systems, virtual machines, middleware and high-level languages.Comment: Presented at DSLRob 2011 (arXiv:1212.3308
Stanford Aerospace Research Laboratory research overview
Over the last ten years, the Stanford Aerospace Robotics Laboratory (ARL) has developed a hardware facility in which a number of space robotics issues have been, and continue to be, addressed. This paper reviews two of the current ARL research areas: navigation and control of free flying space robots, and modelling and control of extremely flexible space structures. The ARL has designed and built several semi-autonomous free-flying robots that perform numerous tasks in a zero-gravity, drag-free, two-dimensional environment. It is envisioned that future generations of these robots will be part of a human-robot team, in which the robots will operate under the task-level commands of astronauts. To make this possible, the ARL has developed a graphical user interface (GUI) with an intuitive object-level motion-direction capability. Using this interface, the ARL has demonstrated autonomous navigation, intercept and capture of moving and spinning objects, object transport, multiple-robot cooperative manipulation, and simple assemblies from both free-flying and fixed bases. The ARL has also built a number of experimental test beds on which the modelling and control of flexible manipulators has been studied. Early ARL experiments in this arena demonstrated for the first time the capability to control the end-point position of both single-link and multi-link flexible manipulators using end-point sensing. Building on these accomplishments, the ARL has been able to control payloads with unknown dynamics at the end of a flexible manipulator, and to achieve high-performance control of a multi-link flexible manipulator
Grasping and Control Issues in Adaptive End Effectors
Research into robotic grasping and manipulation has led to the development of a large number of tendon based end effectors. Many are, however, developed as a research tool, which are limited in application to the laboratory environment. The main reason being that the designs requiring a large number of actuators to be controlled. Due to the space and safety requirements, very few have been developed and commissioned for industrial applications. This paper presents design of a rigid link finger operated by a minimum number of actuators, which may be suitable for a number of adaptive end effectors. The adaptive nature built into the end effector (due to limited number of actuators) presents considerable problems in grasping and control. The paper discusses the issues associated with such designs. The research can be applicable to any adaptive end effectors that are controlled by limited number of actuators and evaluates their suitability in industrial environments
Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms
The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent âdevicesâ, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew âcognitive devicesâ are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications
- âŠ