329,887 research outputs found

    The effects of resources across school phases: a summary of recent evidence

    Get PDF
    This report provides an overview and discussion of the past decade of academic evidence on the causal effects of resources in schooling on students’ outcomes. Early evidence lacked good strategies for estimating the effects of schools resources, leading many people to conclude that spending more on schools had no effect. More recent evidence using better research designs finds that resources do matter, but the range of estimates of the impacts is quite wide. The review devotes special attention to differences across the early years, primary and secondary phases. Theoretical work has indicated that interventions early in a child's life may be more productive than interventions later on. However, although there are more examples of good quality studies on primary schooling, the existing body of empirical work does not lead to a conclusive case in favour of early interventions

    Controlling evaporation loss from water storages

    Get PDF
    [Executive Summary]: Evaporation losses from on-farm storage can potentially be large, particularly in irrigation areas in northern New South Wales and Queensland where up to 40% of storage volume can be lost each year to evaporation. Reducing evaporation from a water storage would allow additional crop production, water trading or water for the environment. While theoretical research into evaporation from storages has previously been undertaken there has been little evaluation of current evaporation mitigation technologies (EMTs) on commercial sized water storages. This project was initiated by the Queensland Government Department of Natural Resources and Mines (NRM) with the express aim of addressing this gap in our knowledge. The report addressed i) assessment of the effectiveness of different EMT’s in reducing evaporation from commercial storages across a range of climate regions, ii) assessment of the practical and technical limitations of different evaporation control products, and iii) comparison of the economics of different EMT’s on water storages used for irrigation

    New Variable Compliance Method for Estimating In-Situ Stress and Leak-Off from DFIT Data

    Full text link
    It is shown that using Carter leak-off is an oversimplification that leads to significant errors in the interpretation of DFIT data. Most importantly, this article reveals that previous methods of estimating minimum in-situ stress often lead to significant over or underestimates. Based on our modeling and simulation results, we propose a much more accurate and reliable method to estimate the minimum in-situ stress and fracture pressure dependent leak-off rate

    Applications of sensitivity analysis for probit stochastic network equilibrium

    Get PDF
    Network equilibrium models are widely used by traffic practitioners to aid them in making decisions concerning the operation and management of traffic networks. The common practice is to test a prescribed range of hypothetical changes or policy measures through adjustments to the input data, namely the trip demands, the arc performance (travel time) functions, and policy variables such as tolls or signal timings. Relatively little use is, however, made of the full implicit relationship between model inputs and outputs inherent in these models. By exploiting the representation of such models as an equivalent optimisation problem, classical results on the sensitivity analysis of non-linear programs may be applied, to produce linear relationships between input data perturbations and model outputs. We specifically focus on recent results relating to the probit Stochastic User Equilibrium (PSUE) model, which has the advantage of greater behavioural realism and flexibility relative to the conventional Wardrop user equilibrium and logit SUE models. The paper goes on to explore four applications of these sensitivity expressions in gaining insight into the operation of road traffic networks. These applications are namely: identification of sensitive, ‘critical’ parameters; computation of approximate, re-equilibrated solutions following a change (post-optimisation); robustness analysis of model forecasts to input data errors, in the form of confidence interval estimation; and the solution of problems of the bi-level, optimal network design variety. Finally, numerical experiments applying these methods are reported

    Measuring Infringement of Intellectual Property Rights

    Get PDF
    © Crown Copyright 2014. You may re-use this information (excluding logos) free of charge in any format or medium, under the terms of the Open Government Licence. To view this licence, visit http://www.nationalarchives.gov. uk/doc/open-government-licence/ Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concernedThe review is wide-ranging in scope and overall our findings evidence a lack of appreciation among those producing research for the high-level principles of measurement and assessment of scale. To date, the approaches adopted by industry seem more designed for internal consumption and are usually contingent on particular technologies and/or sector perspectives. Typically, there is a lack of transparency in the methodologies and data used to form the basis of claims, making much of this an unreliable basis for policy formulation. The research approaches we found are characterised by a number of features that can be summarised as a preference for reactive approaches that look to establish snapshots of an important issue at the time of investigation. Most studies are ad hoc in nature and on the whole we found a lack of sustained longitudinal approaches that would develop the appreciation of change. Typically the studies are designed to address specific hypotheses that might serve to support the position of the particular commissioning body. To help bring some structure to this area, we propose a framework for the assessment of the volume of infringement in each different area. The underlying aim is to draw out a common approach wherever possible in each area, rather than being drawn initially to the differences in each field. We advocate on-going survey tracking of the attitudes, perceptions and, where practical, behaviours of both perpetrators and claimants in IP infringement. Clearly, the nature of perpetrators, claimants and enforcement differs within each IPR but in our view the assessment for each IPR should include all of these elements. It is important to clarify that the key element of the survey structure is the adoption of a survey sampling methodology and smaller volumes of representative participation. Once selection is given the appropriate priority, a traditional offline survey will have a part to play, but as the opportunity arises, new technological methodologies, particularly for the voluntary monitoring of online behaviour, can add additional detail to the overall assessment of the scale of activity. This framework can be applied within each of the IP right sectors: copyright, trademarks,patents, and design rights. It may well be that the costs involved with this common approach could be mitigated by a syndicated approach to the survey elements. Indeed, a syndicated approach has a number of advantages in addition to cost. It could be designed to reduce any tendency either to hide inappropriate/illegal activity or alternatively exaggerate its volume to fit with the theme of the survey. It also has the scope to allow for monthly assessments of attitudes rather than being vulnerable to unmeasured seasonal impacts

    Implementing 5D BIM on construction projects: Contractor perspectives from the UK construction sector

    Get PDF
    This is an accepted manuscript of an article published by Emerald in Journal of Engineering, Design and Technology on 09/05/2020: https://doi.org/10.1108/JEDT-01-2020-0007 The accepted version of the publication may differ from the final published version.Purpose The purpose of this paper is to report on primary research findings that sought to investigate and analyse salient issues on the implementation of 5D building information modelling (BIM) from the UK contractors’ perspective. Previous research and efforts have predominantly focussed on the use of technologies for cost estimation and quantity takeoff within a more traditional-led procurement, with a paucity of research focussing on how 5D BIM could facilitate costing within contractor-led procurement. This study fills this current knowledge gap and enhances the understanding of the specific costing challenges faced by contractors in contractor-led projects, leading to the development of 5D framework for use in future projects. Design/methodology/approach To develop a fully detailed understanding of the challenges and issues being faced in this regard, a phenomenological, qualitative-based study was undertaken through interviews involving 21 participants from UK-wide construction organisations. A thematic data analytical process was applied to the data to derive key issues, and this was then used to inform the development of a 5D-BIM costing framework. Findings Multi-disciplinary findings reveal a range of issues faced by contractors when implementing 5D BIM. These exist at strategic, operational and technological levels which require addressing successful implementation of 5D BIM on contractor-led projects adhering to Level 2 BIM standards. These findings cut across the range of stakeholders on contractor-led projects. Ultimately, the findings suggest strong commitment and leadership from organisational management are required to facilitate cost savings and generate accurate cost information. Practical implications This study highlights key issues for any party seeking to effectively deploy 5D BIM on a contractor-led construction project. A considerable cultural shift towards automating and digitising cost functions virtually, stronger collaborative working relationship relative to costing in design development, construction practice, maintenance and operation is required. Originality/value By analysing findings from primary research data, the work concludes with the development of a 5D BIM costing framework to support contractor-led projects which can be implemented to ensure that 5D BIM is successfully implemented

    Warranty Data Analysis: A Review

    Get PDF
    Warranty claims and supplementary data contain useful information about product quality and reliability. Analysing such data can therefore be of benefit to manufacturers in identifying early warnings of abnormalities in their products, providing useful information about failure modes to aid design modification, estimating product reliability for deciding on warranty policy and forecasting future warranty claims needed for preparing fiscal plans. In the last two decades, considerable research has been conducted in warranty data analysis (WDA) from several different perspectives. This article attempts to summarise and review the research and developments in WDA with emphasis on models, methods and applications. It concludes with a brief discussion on current practices and possible future trends in WDA

    Screening of energy efficient technologies for industrial buildings' retrofit

    Get PDF
    This chapter discusses screening of energy efficient technologies for industrial buildings' retrofit
    corecore