A Conductometric Indium Oxide Semiconducting Nanoparticle Enzymatic Biosensor Array

We report a conductometric nanoparticle biosensor array to address the significant variation of electrical property in nanomaterial biosensors due to the random network nature of nanoparticle thin-film. Indium oxide and silica nanoparticles (SNP) are assembled selectively on the multi-site channel area of the resistors using layer-by-layer self-assembly. To demonstrate enzymatic biosensing capability, glucose oxidase is immobilized on the SNP layer for glucose detection. The packaged sensor chip onto a ceramic pin grid array is tested using syringe pump driven feed and multi-channel I–V measurement system. It is successfully demonstrated that glucose is detected in many different sensing sites within a chip, leading to concentration dependent currents. The sensitivity has been found to be dependent on the channel length of the resistor, 4–12 nA/mM for channel lengths of 5–20 μm, while the apparent Michaelis-Menten constant is 20 mM. By using sensor array, analytical data could be obtained with a single step of sample solution feeding. This work sheds light on the applicability of the developed nanoparticle microsensor array to multi-analyte sensors, novel bioassay platforms, and sensing components in a lab-on-a-chip

Prospects of Nanotechnology in Clinical Immunodiagnostics

Nanostructured materials are promising compounds that offer new opportunities as sensing platforms for the detection of biomolecules. Having micrometer-scale length and nanometer-scale diameters, nanomaterials can be manipulated with current nanofabrication methods, as well as self-assembly techniques, to fabricate nanoscale bio-sensing devices. Nanostructured materials possess extraordinary physical, mechanical, electrical, thermal and multifunctional properties. Such unique properties advocate their use as biomimetic membranes to immobilize and modify biomolecules on the surface of nanoparticles. Alignment, uniform dispersion, selective growth and diameter control are general parameters which play critical roles in the successful integration of nanostructures for the fabrication of bioelectronic sensing devices. In this review, we focus on different types and aspects of nanomaterials, including their synthesis, properties, conjugation with biomolecules and their application in the construction of immunosensing devices. Some key results from each cited article are summarized by relating the concept and mechanism behind each sensor, experimental conditions and the behavior of the sensor under different conditions, etc. The variety of nanomaterial-based bioelectronic devices exhibiting novel functions proves the unique properties of nanomaterials in such sensing devices, which will surely continue to expand in the future. Such nanomaterial based devices are expected to have a major impact in clinical immunodiagnostics, environmental monitoring, security surveillance and for ensuring food safety

Electrochemical Amperometric Biosensor Applications of Nanostructured Metal Oxides: A Review

Biological sensors have been extensively investigated during the last few decades. Among the diverse facets of biosensing research, nanostructured metal oxides (NMOs) offer a plethora of potential benefits. In this article, we provide a thorough review on the sensor applications of NMOs such as glucose, cholesterol, urea, and uric acid. A detailed analysis of the literature is presented with organized tables elaborating the fundamental characteristics of sensors including the sensitivity, limit of detection, detection range, and stability parameters such as duration, relative standard deviation, and retention. Further analysis was provided through an innovative way of displaying the sensitivity and linear range of sensors in figures. As the unique properties of NMOs offer potential applications to various research fields, we believe this review is both timely and provides a comprehensive analysis of the current state of NMO applications

Review: The increasing importance of carbon nanotubes and nanostructured conducting polymers in biosensors

The growing need for analytical devices requiring smaller sample volumes, decreased power consumption and improved performance have been driving forces behind the rapid growth in nanomaterials research. Due to their dimensions, nanostructured materials display unique properties not traditionally observed in bulk materials. Characteristics such as increased surface area along with enhanced electrical/optical properties make them suitable for numerous applications such as nanoelectronics, photovoltaics and chemical/biological sensing. In this review we examine the potential that exists to use nanostructured materials for biosensor devices. By incorporating nanomaterials, it is possible to achieve enhanced sensitivity, improved response time and smaller size. Here we report some of the success that has been achieved in this area. Many nanoparticle and nanofibre geometries are particularly relevant, but in this paper we specifically focus on organic nanostructures, reviewing conducting polymer nanostructures and carbon nanotubes

Conducting polymer nanowires for multi-analyte chemiresistive sensing

A conducting polymer nanowire-based chemiresistive sensor array was developed for the liquid-phase multi-analyte detection. The ability to distinguish and quantify multiple chemical species with a single sensory device can be useful in many areas including food industry, pollution control, biosensors, and explosives detection. A polyaniline nanowire is a good candidate for use as a chemiresistive sensing material due to its large resistivity change and ease of synthesis. However the two most important issues in chemiresistive sensors are the reproducibility in sensing and the selectivity in chemical species. For improving the reproducibility in polyaniline-based chemiresistive sensing, a self-calibration mechanism was proposed. This method utilizes two unique properties of polyaniline: one is the rate of the conductivity decay upon repeated cycling of the electrochemical potential, and the other is the position of the second redox potential, both of which are pH-dependent. These two properties were minimally affected by the polyaniline’s inherent limitations, i.e. hysteresis and degradation, and therefore were effective in obtaining repeatable measurements. In order to enhance the selectivity, a catalyst-based selective detection was proposed. This method is based on the concept that the catalytic reaction between the species and the catalysts causes a local pH change near the polyaniline nanowire network which changes the resistance of the polymer. Finally, a sensor array consisting of polyaniline nanowire-based chemiresistors with each sensing element modified with a unique catalyst was implemented for multi-analyte sensing of ascorbic acid, dopamine, and hydrogen peroxide. Principal component algorithm was applied for the classification and semi-quantification of the chemical species

Sensori conduttimetrici non invasivi per applicazioni biomediche - revisione dello stato dell'arte

I sensori elettrochimici, biosensori se usati per misurare parametri biologici, acquisiscono sempre più importanza nel campo delle misure; nuovi materiali e tecniche di realizzazione quali smart materials, nano strutture, tecniche di stampa, nuovi polimeri hanno portato in alto gli standard metrologici di questi dispositivi che competono e in alcuni casi sono addirittura preferiti a metodi di analisi tradizionali di laboratorio. Tra questi i sensori conduttimetrici si dimostrano molto versatili e di semplice realizzazione, garantiscono ottime performance metrologiche, sono facilmente adattabili a dispositivi indossabili e permettono sia rapide che prolungate misure per la ricerca di biomarkers specifici. Più avanti si analizzeranno particolari casi di interesse di applicazioni per misure di parametri medici di diversi fluidi corporei, citando la valenza clinica di questi ed enfatizzando la trattazione sulle specifiche dei dispositivi

Metal oxide nanostructures for sensor applications

Electrorheological fluids have been paying a lot of attention due to their potential use in active control of various devices in mechanics, biomedicine or robotics. An electrorheological fluid consisting of polarizable particles dispersed in a non-conducting liquid is considered to be one of the most interesting and important smart fluids. This work presents the effect of the dopant, camphorsulphonic acid or citric acid, on the electrorheological behaviour of suspensions of doped polyaniline nanostructures dispersed in silicone oil, revealing its key role. The influence of carbon nanoparticle concentration has also been studied for these dispersions. All the samples showed an electrorheological effect, which increased with electric field and nanostructure concentration and decreased with silicone oil viscosity. However, the magnitude of this effect was strongly influenced not only by carbon nanoparticle concentration but also by the dopant material. The electrorheological effect was much lower with a higher carbon nanoparticle concentration and doped with citric acid. The latter is probably due to the different acidities of the dopants that lead to a different conductivity of polyaniline nanostructures. Furthermore, the effect of the carbon nanoparticles could be related to its charge trapping mechanism, while the charge transfer through the polymeric backbone occurs by hopping. Polyaniline/camphorsulphonic acid composite nanostructures dispersed in silicone oil exhibited the highest electrorheological activity, higher than three decades increase in apparent viscosity for low shear rates and high electric fields, showing their potential application as electrorheological smart materials.authorsversionpublishe