Cladding strategies for building-integrated photovoltaics

Photovoltaic cladding on the surfaces of commercial buildings has the potential for considerable reductions in carbon emissions due to embedded renewable power generation displacing conventional power utilization. In this paper, a model is described for the optimization of photovoltaic cladding densities on commercial building surfaces. The model uses a modified form of the ‘fill factor’ method for photovoltaic power supply coupled to new regression-based procedures for power demand estimation. An optimization is included based on a defined ‘mean index of satisfaction’ for matched power supply and demand (i.e., zero power exportation to the grid). The mean index of satisfaction directly translates to the reduction in carbon emission that might be expected over conventional power use. On clear days throughout the year, reductions of conventional power use of at least 60% can be achieved with an optimum cladding pattern targeted to lighting and small power load demands

Fractional branes, warped compactifications and backreacted orientifold planes

The standard extremal p-brane solutions in supergravity are known to allow for a generalisation which consists of adding a linear dependence on the world-volume coordinates to the usual harmonic function. In this note we demonstrate that remarkably this generalisation goes through in exactly the same way for p-branes with fluxes added to it that correspond to fractional p-branes. We relate this to warped orientifold compactifications by trading the Dp-branes for Op-planes that solve the RR tadpole condition. This allows us to interpret the worldvolume dependence as due to lower-dimensional scalars that flow along the massless directions in the no-scale potential. Depending on the details of the fluxes these flows can be supersymmetric domain wall flows. Our solutions provide explicit examples of backreacted orientifold planes in compactifications with non-constant moduli.Comment: 20 pages, incl. references. v2: small changes required for JHEP publication. v3: few equation typos correcte

Boundaries of Semantic Distraction: Dominance and Lexicality Act at Retrieval

Three experiments investigated memory for semantic information with the goal of determining boundary conditions for the manifestation of semantic auditory distraction. Irrelevant speech disrupted the free recall of semantic category-exemplars to an equal degree regardless of whether the speech coincided with presentation or test phases of the task (Experiment 1) and occurred regardless of whether it comprised random words or coherent sentences (Experiment 2). The effects of background speech were greater when the irrelevant speech was semantically related to the to-be-remembered material, but only when the irrelevant words were high in output dominance (Experiment 3). The implications of these findings in relation to the processing of task material and the processing of background speech is discussed

A cross-sector analysis of human and organisational factors in the deployment of data-driven predictive maintenance

Domains such as utilities, power generation, manufacturing and transport are increasingly turning to data-driven tools for management and maintenance of key assets. Whole ecosystems of sensors and analytical tools can provide complex, predictive views of network asset performance. Much research in this area has looked at the technology to provide both sensing and analysis tools. The reality in the field, however, is that the deployment of these technologies can be problematic due to user issues, such as interpretation of data or embedding within processes, and organisational issues, such as business change to gain value from asset analysis. 13 experts from the field of remote condition monitoring, asset management and predictive analytics across multiple sectors were interviewed to ascertain their experience of supplying data-driven applications. The results of these interviews are summarised as a framework based on a predictive maintenance project lifecycle covering project motivations and conception, design and development, and operation. These results identified critical themes for success around having a target or decision-led, rather than data-led, approach to design; long-term resourcing of the deployment; the complexity of supply chains to provide data-driven solutions and the need to maintain knowledge across the supply chain; the importance of fostering technical competency in end-user organisations; and the importance of a maintenance-driven strategy in the deployment of data-driven asset management. Emerging from these themes are recommendations related to culture, delivery process, resourcing, supply chain collaboration and industry-wide cooperation

Process evaluation protocol for the I-WOTCH study: an opioid tapering support programme for people with chronic non-malignant pain

58.<Nichols VP, Abraham C, Eldabe S, Sandhu HK, Underwood M, Seers K onbehalf of the I-WOTCH Team (Iglesias CP is member of the I-WOTCH team).. BMJ Open 2019; 9(10):e028998. Published online 2019 Oct 10. DOI: 10.1136/bmjopen-2019-028998PMID: 3160158

Quantitative imaging of concentrated suspensions under flow

We review recent advances in imaging the flow of concentrated suspensions, focussing on the use of confocal microscopy to obtain time-resolved information on the single-particle level in these systems. After motivating the need for quantitative (confocal) imaging in suspension rheology, we briefly describe the particles, sample environments, microscopy tools and analysis algorithms needed to perform this kind of experiments. The second part of the review focusses on microscopic aspects of the flow of concentrated model hard-sphere-like suspensions, and the relation to non-linear rheological phenomena such as yielding, shear localization, wall slip and shear-induced ordering. Both Brownian and non-Brownian systems will be described. We show how quantitative imaging can improve our understanding of the connection between microscopic dynamics and bulk flow.Comment: Review on imaging hard-sphere suspensions, incl summary of methodology. Submitted for special volume 'High Solid Dispersions' ed. M. Cloitre, Vol. xx of 'Advances and Polymer Science' (Springer, Berlin, 2009); 22 pages, 16 fig

The survey of serum retinol of the children aged 0~4 years in Zhejiang Province, China

<p>Abstract</p> <p>Background</p> <p>Vitamin A can have a positive impact on growth and development of children, but vitamin A deficiency (VAD) was found to be a public health problem in Zhejiang Province, China in 1998. There have been no studies on this topic in Zhejiang Province recently. This study was designed to evaluate the serum retinol levels of children aged 0~4 years in Zhejiang Province, southeast China. This epidemiological data will help design supplementation strategies for vitamin A in high-risk groups and improve their vitamin A status.</p> <p>Methods</p> <p>Children were randomly recruited for this study using a stratified sampling method. A blood sample was collected from each child. Assessment included C-reactive protein (CRP), serum retinol measured with HPLC and a questionnaire completed providing for family information and nutritional status. Logistic regression analysis was used to evaluate the risk factors for VAD in children.</p> <p>Results</p> <p>A group of 357 subjects aged 1 day to 4 years were recruited. The mean plasma retinol concentration was 1.653 (sd 0.47) μmol/L. There were 3.08% (11/357) of children affected with VAD, and 7.28% (26/357) of children had low vitamin A status, but none of the children showed any clinical symptoms of VAD. There was no significant difference in the levels of plasma retinol and the incidence rate of VAD between male and female children. Multivariate logistic regression analysis showed that living in urban region, having parents with good education and taking vitamin A capsule regularly prevented children from VAD, whereas being young (less than 2 years old) was a risk factor.</p> <p>Conclusion</p> <p>Low vitamin A status remains a nutritional problem in Zhejiang Province. The high-risk group in this study were young, dwelled in rural regions, had parents with poor education and did not take a regular vitamin A containing supplement.</p

Rapidity and Centrality Dependence of Proton and Anti-proton Production from Au+Au Collisions at sqrt(sNN) = 130GeV

We report on the rapidity and centrality dependence of proton and anti-proton transverse mass distributions from Au+Au collisions at sqrt(sNN) = 130GeV as measured by the STAR experiment at RHIC. Our results are from the rapidity and transverse momentum range of |y|<0.5 and 0.35 <p_t<1.00GeV/c. For both protons and anti-protons, transverse mass distributions become more convex from peripheral to central collisions demonstrating characteristics of collective expansion. The measured rapidity distributions and the mean transverse momenta versus rapidity are flat within |y|<0.5. Comparisons of our data with results from model calculations indicate that in order to obtain a consistent picture of the proton(anti-proton) yields and transverse mass distributions the possibility of pre-hadronic collective expansion may have to be taken into account.Comment: 4 pages, 3 figures, 1 table, submitted to PR

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal