Remote preconditioning by aortic constriction: affords cardioprotection as classical or other remote ischemic preconditioning? Role of iNOS

Dose remote preconditioning by aortic constriction (RPAC) affords cardioprotection similar to classical or other remote ischemic preconditioning stimulus? Moreover study was also designed to investigate role of inducible nitric oxide synthase in remote preconditioning by aortic constriction. There are sufficient evidences that "ischemic preconditioning" has surgical applications and afford clinically relevant cardioprotection. Transient occlusion of circumflex artery, renal artery, limb artery or mesenteric artery preconditions the myocardium against ischemia reperfusion injury in case of ischemic heart disease leading to myocardial infraction. Here abdominal aorta was selected to produce RPAC. Four episodes of Ischemia-reperfusion of 5 min each to abdominal aorta produced RPAC by assessment of infract size, LDH and CK. These studies suggest RPAC produced acute (FWOP) and delayed (SWOP) cardioprotective effect. RPAC demonstrated a significant decrease in Ischemia-reperfusion induced release of LDH, CK and extent of myocardial infract size. L-NAME (10 mg/Kg i.v.), Aminoguanidine (150 mg/Kg s.c.), Aminoguanidine (300 mg/Kg s.c.), S-methyl isothiourea (3 mg/Kg i.v.), 1400W (1 mg/Kg i.v.) administered 10 min. before global ischemia reperfusion produced no marked effect. Aminoguanidine (150 mg/Kg s.c.), Aminoguanidine (300 mg/Kg s.c.), S-methyl isothiourea (3 mg/Kg i.v.), 1400W (1 mg/Kg i.v.) pretreatment after RPAC produced no significant effect on acute RPAC induced decrease in LDH, CK and infract size, whereas L-NAME (10 mg/Kg i.v.) increased RPAC induced decrease in LDH, CK and infract size. Most interesting observation is in delayed RPAC, where all NOS inhibitors pretreatment attenuate RPAC induced decrease in LDH, CK and infract size. In conclusions, "Remote preconditioning by aortic constriction" (RPAC) affords cardioprotection similar to classical or other remote ischemic preconditioning stimulus. Moreover, late or delayed phase of RPAC has been mediated by inducible nitric oxide synthase (iNOS) whereas it has not involved in acute RPAC

Low-Voltage High-Speed Ring Oscillator with a-InGaZnO TFTs

ECR/2017/000931 POCI-01-0145-FEDER-007688 PTDC/NAN-MAT/30812/2017This paper presents a high-speed ring oscillator (RO) with amorphous Indium-Gallium-Zinc-Oxide Thin-film transistors (a-IGZO TFTs). The proposed RO reduces the delay of a single stage inverter using intermediate signals generated within the RO, hence, improving the speed. To validate the proposed idea, two conventional ROs (with diode-load load inverter and bootstrapped pseudo-CMOS inverter) and the proposed RO were fabricated at a temperature ≤ 180°C. Measured results of the proposed RO have shown a frequency and power-delay-product (PDP) of 173.2 kHz and 0.7 nJ at a supply voltage of 6V. Further, it shows approximately 155% (44%) increase in frequency and 14% (24.5%) decrease in PDP compared to diode-load inverter (bootstrapped pseudo-CMOS inverter) based ROs. Therefore, the proposed RO finds applications in low-voltage and high speed designs for timing signal generation.publishersversionpublishe

Rail-to-Rail Timing Signals Generation Using InGaZnO TFTs for Flexible X-Ray Detector

ECR/2017/000931 POCI-01-0145-FEDER-007688This paper reports on-chip rail-to-rail timing signals generation thin-film circuits for the first time. These circuits, based on a-IGZO thin-film transistors (TFTs) with a simple staggered bottom gate structure, allow row and column selection of a sensor matrix embedded in a flexible radiation sensing system. They include on-chip clock generator (ring oscillator), column selector (shift register) and row-selector (a frequency divider and a shift register). They are realised with rail-to-rail logic gates with level-shifting ability that can perform inversion and NAND logic operations. These logic gates are capable of providing full output swing between supply rails, $V_{DD}$ and $V_{SS}$ , by introducing a single additional switch for each input in bootstrapping logic gates. These circuits were characterised under normal ambient atmosphere and show an improved performance compared to the conventional logic gates with diode connected load and pseudo CMOS counterparts. By using these high-performance logic gates, a complete rail-to-rail frequency divider is presented from measurements using D-Flip Flop. In order to realize a complete compact system, an on-chip ring oscillator (output clock frequency around 1 kHz) and a shift register are also presented from simulations, where these circuits show a power consumption of 1.5 mW and 0.82 mW at a supply voltage of 8 V, respectively. While the circuit concepts described here were designed for an X-ray sensing system, they can be readily expanded to other domains where flexible on-chip timing signal generation is required, such as, smart packaging, biomedical wearable devices and RFIDs.publishersversionpublishe

Study of optical interaction between UO2++ and Ho3+ in zinc phosphate glass

Abstract A study of Non-radiative energy transfer in UO2-Ho system in zinc phosphate glass has been done by observing the steady state emission of UO2++ with varying concentration of Ho3+ in zinc phosphate glass at room temperature. It has been observed that UO2++ ion emission intensity decreases with increasing Ho3+ concentration resulting in a non-radiative energy transfer from UO2++ to Ho3+. The energy transfer mechanism for the systems is confirmed to be electric dipole-dipole in nature according to Fong-Diestler’s, Forster and Dexter’s and Van Uitert’s theory. The donor-acceptor distances (DD→A) and transfer efficiencies (η), as well as energy transfer probabilities (Pda) in presence of different acceptor concentration, have been calculated

Study of optical interaction between UO2++ and Ho3+ in zinc phosphate glass

5-10A study of Non-radiative energy transfer in UO2-Ho system in zinc phosphate glass has been done by observing the steady state emission of UO2++ with varying concentration of Ho3+ in zinc phosphate glass at room temperature. It has been observed that UO2++ ion emission intensity decreases with increasing Ho3+ concentration resulting in a non-radiative energy transfer from UO2++ to Ho3+. The energy transfer mechanism for the systems is confirmed to be electric dipole-dipole in nature according to Fong-Diestler’s, Forster and Dexter’s and Van Uitert’s theory. The donor-acceptor distances (DD→A) and transfer efficiencies (η), as well as energy transfer probabilities (Pda) in presence of different acceptor concentration, have been calculated

Measurement of the top quark forward-backward production asymmetry and the anomalous chromoelectric and chromomagnetic moments in pp collisions at √s = 13 TeV

Abstract The parton-level top quark (t) forward-backward asymmetry and the anomalous chromoelectric (d̂ t) and chromomagnetic (μ̂ t) moments have been measured using LHC pp collisions at a center-of-mass energy of 13 TeV, collected in the CMS detector in a data sample corresponding to an integrated luminosity of 35.9 fb−1. The linearized variable AFB(1) is used to approximate the asymmetry. Candidate t t ¯ events decaying to a muon or electron and jets in final states with low and high Lorentz boosts are selected and reconstructed using a fit of the kinematic distributions of the decay products to those expected for t t ¯ final states. The values found for the parameters are AFB(1)=0.048−0.087+0.095(stat)−0.029+0.020(syst),μ̂t=−0.024−0.009+0.013(stat)−0.011+0.016(syst), and a limit is placed on the magnitude of | d̂ t| < 0.03 at 95% confidence level. [Figure not available: see fulltext.

Measurement of t(t)over-bar normalised multi-differential cross sections in pp collisions at root s=13 TeV, and simultaneous determination of the strong coupling strength, top quark pole mass, and parton distribution functions

Peer reviewe

An embedding technique to determine ττ backgrounds in proton-proton collision data

An embedding technique is presented to estimate standard model tau tau backgrounds from data with minimal simulation input. In the data, the muons are removed from reconstructed mu mu events and replaced with simulated tau leptons with the same kinematic properties. In this way, a set of hybrid events is obtained that does not rely on simulation except for the decay of the tau leptons. The challenges in describing the underlying event or the production of associated jets in the simulation are avoided. The technique described in this paper was developed for CMS. Its validation and the inherent uncertainties are also discussed. The demonstration of the performance of the technique is based on a sample of proton-proton collisions collected by CMS in 2017 at root s = 13 TeV corresponding to an integrated luminosity of 41.5 fb(-1).Peer reviewe