Impact properties analysis of rotationally molded polyethylene and polypropylene for a wide range of temperatures

Rotational molding is an established and growing manufacturing method for large, hollow plastic components. In this work the impact properties of rotationally molded Polyethylene (PE) and Polypropylene (PP) were tested at temperature in the range of -40 °C to 30 °C. Dynamic mechanical thermal analysis (DMTA) was performed to analyse the measured impact properties of PP and PE plastics. For PP, a very good relationship was found between peak impact strength and the loss modulus curve obtained in DMTA analysis. A relationship between density, β peak height and peak impact strength was found for PE which is different from previous findings in the literature. It is concluded that further work should focus on developing an understanding of the PE material's microstructure in order to more fully understand its impact properties

An investigation of low velocity impact properties of rotationally moulded skin-foam-skin sandwich structure

In this study, the low velocity impact properties of rotationally moulded skin-foam-skin sandwich structures were investigated experimentally since there is a need for a greater understanding of the impact behaviour of these composites in service to extend the range of their applications. Polyethylene rotationally moulded sandwich structures were manufactured at various skin and core layer thickness combinations and tested using an instrumented low velocity drop weight impact testing machine at 20J to 100J impact energy levels, at room temperature. This allowed the identification of the impact response, failure mode, the effects of the skin and core layer thickness on impact resistance. Force-deflection curves, maximum force, contact time, maximum deflection versus impact energy curves were analysed. Samples were seen to fail due to the indentation dart piercing the upper and lower skins, with crushing and consolidation seen in the core foamed layer. Delamination at the core/skin interface was not observed. It was found that fracture initiates from the lower skin and then continues to grow to the upper skin via the foamed core layer. The impact resistance was noted to increase with increasing skin and core layer thickness, though an increase in skin layer thickness had a greater contribution than an increase in the core layer thickness. Keywords: Rotational moulding, skin-foam-skin, sandwich, low velocity impact, PE

Pharmacogenetic Analysis of INT 0144 Trial: Association of Polymorphisms with Survival and Toxicity in Rectal Cancer Patients Treated with 5-FU and Radiation

PURPOSE We tested whether 18 polymorphisms in 16 genes (GSTP1, COX2, IL10, EGFR, EGF, FGFR4, CCDN1, VEGFR2, VEGF, CXCR2, IL8, MMP3, ICAM1, ERCC1, RAD51, and XRCC3) would predict disease-free survival (DFS), overall survival (OS), and toxicity in the INT0144 trial, which was designed to investigate different postoperative regimens of 5-fluorouracil (5-FU)-based chemoradiation (CRT) in locally advanced rectal cancers: Arm 1 consisted of bolus 5-FU followed by 5-FU protracted venous infusion (PVI) with radiotherapy; arm 2 was induction and concomitant PVI 5-FU with radiotherapy and arm 3 was induction and concomitant bolus 5-FU with radiotherapy. EXPERIMENTAL DESIGN DNA from 746 stage II/III rectal patients enrolled in the Southwest Oncology Group (SWOG) S9304 phase III trial was analyzed. Genomic DNA was extracted from formalin-fixed, paraffin-embedded (FFPE) tumor tissue. The polymorphisms were analyzed using direct DNA-sequencing or polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). RESULTS GSTP1-Ile105Val (rs1695) was significantly associated with DFS and OS and its effect did not vary by treatment arm. The five-year DFS and OS were 53% and 58%, respectively, for G/G, 66% and 72% for G/A, and 57% and 66% for A/A patients. In arm 2, IL8-251A/A genotype (rs4073) was associated with a lower risk of toxicities (P = 0.04). The VEGFR2 H472Q Q/Q genotype (rs1870377) was associated with a higher risk of grade 3-5 proximal upper gastrointestinal tract (PUGIT) mucositis (P = 0.04) in arm 2. However, in arm 1, this genotype was associated with a lower risk of PUGIT mucositis (P = 0.004). CONCLUSION rs1695 may be prognostic in patients with rectal cancer treated with adjuvant CRT. rs4073 and rs1870377 may exhibit different associations with toxicity, according to the 5-FU schedule

Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE

Measurement of the t t-bar production cross section in the dilepton channel in pp collisions at sqrt(s) = 7 TeV

The t t-bar production cross section (sigma[t t-bar]) is measured in proton-proton collisions at sqrt(s) = 7 TeV in data collected by the CMS experiment, corresponding to an integrated luminosity of 2.3 inverse femtobarns. The measurement is performed in events with two leptons (electrons or muons) in the final state, at least two jets identified as jets originating from b quarks, and the presence of an imbalance in transverse momentum. The measured value of sigma[t t-bar] for a top-quark mass of 172.5 GeV is 161.9 +/- 2.5 (stat.) +5.1/-5.0 (syst.) +/- 3.6(lumi.) pb, consistent with the prediction of the standard model.Comment: Replaced with published version. Included journal reference and DO

Combined search for the quarks of a sequential fourth generation

Results are presented from a search for a fourth generation of quarks produced singly or in pairs in a data set corresponding to an integrated luminosity of 5 inverse femtobarns recorded by the CMS experiment at the LHC in 2011. A novel strategy has been developed for a combined search for quarks of the up and down type in decay channels with at least one isolated muon or electron. Limits on the mass of the fourth-generation quarks and the relevant Cabibbo-Kobayashi-Maskawa matrix elements are derived in the context of a simple extension of the standard model with a sequential fourth generation of fermions. The existence of mass-degenerate fourth-generation quarks with masses below 685 GeV is excluded at 95% confidence level for minimal off-diagonal mixing between the third- and the fourth-generation quarks. With a mass difference of 25 GeV between the quark masses, the obtained limit on the masses of the fourth-generation quarks shifts by about +/- 20 GeV. These results significantly reduce the allowed parameter space for a fourth generation of fermions.Comment: Replaced with published version. Added journal reference and DO

Search for New Physics with Jets and Missing Transverse Momentum in pp collisions at sqrt(s) = 7 TeV

A search for new physics is presented based on an event signature of at least three jets accompanied by large missing transverse momentum, using a data sample corresponding to an integrated luminosity of 36 inverse picobarns collected in proton--proton collisions at sqrt(s)=7 TeV with the CMS detector at the LHC. No excess of events is observed above the expected standard model backgrounds, which are all estimated from the data. Exclusion limits are presented for the constrained minimal supersymmetric extension of the standard model. Cross section limits are also presented using simplified models with new particles decaying to an undetected particle and one or two jets

Search for anomalous t t-bar production in the highly-boosted all-hadronic final state

A search is presented for a massive particle, generically referred to as a Z', decaying into a t t-bar pair. The search focuses on Z' resonances that are sufficiently massive to produce highly Lorentz-boosted top quarks, which yield collimated decay products that are partially or fully merged into single jets. The analysis uses new methods to analyze jet substructure, providing suppression of the non-top multijet backgrounds. The analysis is based on a data sample of proton-proton collisions at a center-of-mass energy of 7 TeV, corresponding to an integrated luminosity of 5 inverse femtobarns. Upper limits in the range of 1 pb are set on the product of the production cross section and branching fraction for a topcolor Z' modeled for several widths, as well as for a Randall--Sundrum Kaluza--Klein gluon. In addition, the results constrain any enhancement in t t-bar production beyond expectations of the standard model for t t-bar invariant masses larger than 1 TeV.Comment: Submitted to the Journal of High Energy Physics; this version includes a minor typo correction that will be submitted as an erratu