Heat Processing and Change of Proper Indicators of Basalts

This paper presents the results of the analysis of the quality of basalts, their heat treatment and studies of changes in the chemical composition of basalts, which leads to a change in the external color of partially processed basalt raw materials (hereinafter referred to as semi-finished product). The results of a study of purified basalt from slime, impurities and hydroxides, changes in the chemical composition of basalt rock are presented. The prospects of heat treatment of a semi-finished product and obtaining multi-colored products from mineral raw materials is shown. It was found that the optimal firing temperature of the semi-finished product, the possible options for changing the external color and the criterion points of the thermal effect at which the basalt semi-finished product changes the external shade. These statements are of great scientific and practical interest in the fact that during the heat treatment of a semifinished product, basalt easily overheats and gradually acquires a different color, which occurs to a liquids temperature and allows the future to plan to obtain high-quality multi-colored products from basalts, for example, products for design

Electron-phonon renormalization of the absorption edge of the cuprous halides

Compared to most tetrahedral semiconductors, the temperature dependence of the absorption edges of the cuprous halides (CuCl, CuBr, CuI) is very small. CuCl and CuBr show a small increase of the gap $E_0$ with increasing temperature, with a change in the slope of $E_0$ vs. $T$ at around 150 K: above this temperature, the variation of $E_0$ with $T$ becomes even smaller. This unusual behavior has been clarified for CuCl by measurements of the low temperature gap vs. the isotopic masses of both constituents, yielding an anomalous negative shift with increasing copper mass. Here we report the isotope effects of Cu and Br on the gap of CuBr, and that of Cu on the gap of CuI. The measured isotope effects allow us to understand the corresponding temperature dependences, which we also report, to our knowledge for the first time, in the case of CuI. These results enable us to develop a more quantitative understanding of the phenomena mentioned for the three halides, and to interpret other anomalies reported for the temperature dependence of the absorption gap in copper and silver chalcogenides; similarities to the behavior observed for the copper chalcopyrites are also pointed out.Comment: 14 pages, 5 figures, submitted to Phys. Rev.

Static quantities of the W boson in the SU_L(3) X U_X(1) model with right-handed neutrinos

The static electromagnetic properties of the $W$ boson, $\Delta \kappa$ and $\Delta Q$, are calculated in the SU_L(3)} \times U_X(1) model with right-handed neutrinos. The new contributions from this model arise from the gauge and scalar sectors. In the gauge sector there is a new contribution from a complex neutral gauge boson $Y^0$ and a singly-charged gauge boson $Y^\pm$. The mass of these gauge bosons, called bileptons, is expected to be in the range of a few hundreds of GeV according to the current bounds from experimental data. If the bilepton masses are of the order of 200 GeV, the size of their contribution is similar to that obtained in other weakly coupled theories. However the contributions to both $\Delta Q$ and $\Delta \kappa$ are negligible for very heavy or degenerate bileptons. As for the scalar sector, an scenario is examined in which the contribution to the $W$ form factors is identical to that of a two-Higgs-doublet model. It is found that this sector would not give large corrections to $\Delta \kappa$ and $\Delta Q$.Comment: New material included. Final version to apppear in Physical Review

Study of Operating Characteristics of Pyrotechnic Reserve Power Source Based on Magnesium and Zinс

This paper presents the results of studies of operating parameters of pyrotechnic reserve power source (PRPS). This battery was activated by the pyrotechnic compositions contained in the electrodes. Once the ignition impulse worked, the pyrotechnic compositions took fire immediately and melted the electrolyte. Then the rest pyrotechnic compositions served as anode and cathode. The battery began to discharge. The following characteristics of PRPS were evaluated during the study: release time to operating regime of the electric current, the duration of the PRPS work and initiation temperature of PRPS. A detailed evaluation of the Mg/LiF/PbF2 electrochemical system and Zn/LiF/PbF2 one is undertaken. Test results show that the electric current value using powder of zinc and granular zinc in these experiments was 0.179 A and 0.1 A, respectively, and the operating time at these values of elecrtic current was 40 and 151 sec, respectively

Data Archived for Events in the Caucasus for the CauSINCollaboration Project

The Causin project is a joint effort between the countries in the Caucasus region to develop a Probabilistic Seismic Hazard Analysis. To that end, we have compiled a database of all available network data in the region. The information contained in the database is from four countries: Armenia, Georgia, Azerbaijan, and Turkey and from the Incorporated Research Institutions for Seismology (IRIS). Table 1 lists the networks from which data were obtained. Figure 1 shows the locations of stations, and Figure 2 shows ray paths for event locations of the archived data. An ongoing effort in the region is the Caucasus Seismic Information Network (CauSIN) is an international scientific project enabling the countries and scientists of the region to: better understand the seismicity of the greater Caucasus; develop new monitoring networks to support the scientific understanding; provide access to seismic data from local networks in the participating countries; and develop a probabilistic seismic hazards assessment for the region enabling the governments in the region to better mitigate the damaging effects from large earthquakes. In parallel with this effort, training has been conducted on modern techniques for probabilistic hazards assessment. CauSIN is also an ongoing effort to promote cooperation in the geosciences between Georgia, Armenia, Azerbaijan, European Union and the United States. The DOE supports the American team from New England Research, Inc. (NER), Massachusetts Institute of Technology (MIT), Boston College, and Lawrence Livermore National Laboratory (LLNL)

Technological Aspects of Introduction Crocus Alatavicus According to GACP Requirements

According to the forecasts of the World Health Organization, the share of herbal medicines in the global pharmaceutical market is more than 40%. The pronounced growth trend of phytopreparations can lead to depletion of stocks of medicinal plants and the introduction of medicinal plants into the culture is a suitable solution to the problem. In order to ensure the quality of medicinal plants, in 2003 the World Health Organization (WHO) issued guidelines on Good cultivation and harvesting practices (GACP) medicinal plants. This article presents the results of the introduction of the Crocus alatavicus plant by seeds. The aim of the study is to develop a technology for the introduction of Crocus alatavicus by the method of seed propagation according to the principles of GACP. The development of the introduction technology according to the principles of GACP guarantees the provision of domestic pharmaceutical production with high-quality plant raw materials. The introduction was carried out at the pilot production plantation of "Phytoleum" LLP. The results of the study showed that during seed propagation, autumn sowing of Crocus alatavicus seeds is preferable. The introduction of organic fertilizer of vermicompost before sowing seeds has a positive effect on the germination of seeds and the survival of seedlings. The plant in the fourth year of vegetation goes into the generative period and the fruit will form. The results of the introduction of Crocus alatavicus by seeds in the period from 2018 to 2022 showed good seed germination and high survival of seedlings, which makes it possible to recommend the plant for introduction into culture. It is important to emphasize that the ability to cultivate C. alatavicus from seeds creates new opportunities for use as domestic raw materials for the purpose of further rational use in scientific and practical medicine, preserving this species in culture

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson