Tomography of fast-ion velocity-space distributions from synthetic CTS and FIDA measurements

We compute tomographies of 2D fast-ion velocity distribution functions from synthetic collective Thomson scattering (CTS) and fast-ion D-alpha (FIDA) 1D measurements using a new reconstruction prescription. Contradicting conventional wisdom we demonstrate that one single 1D CTS or FIDA view suffices to compute accurate tomographies of arbitrary 2D functions under idealized conditions. Under simulated experimental conditions, single-view tomographies do not resemble the original fast-ion velocity distribution functions but nevertheless show their coarsest features. For CTS or FIDA systems with many simultaneous views on the same measurement volume, the resemblance improves with the number of available views, even if the resolution in each view is varied inversely proportional to the number of views, so that the total number of measurements in all views is the same. With a realistic four-view system, tomographies of a beam ion velocity distribution function at ASDEX Upgrade reproduce the general shape of the function and the location of the maxima at full and half injection energy of the beam ions. By applying our method to real many-view CTS or FIDA measurements, one could determine tomographies of 2D fast-ion velocity distribution functions experimentally

Triangulation network of 1929-1944 of the first 1:500 urban map of València

[EN] Triangulation is a surveying method on which earlier maps made were based. Although the origins of the method can be traced back to the 16th century, it is still used today, with minor changes, to adjust networks observed with modern geodetic techniques. In this paper we present the geodetic survey work that was carried out for the primary triangulation network of the first 1:500 urban map of the city of València (Spain). It spanned from 1929 to 1944 and resulted in 421 maps covering about 174 square kilometres. We focus on four key elements to define the geometric framework of a map: (1) the geodetic network, (2) the cartographic projection, (3) the baseline measurements, and (4) the primary triangulation. The paper is based on the interpretation of original documents and field books recovered from the archives of the València City Council. In order to check the accuracy and consistency of the survey work, we recomputed all calculations directly from the field data, following the mathematical procedures of the time. We obtained a set of transformation parameters to convert the coordinates of 1929 to current coordinates based on the European Terrestrial Reference System of 1989 (ETRS89). Results showed that the 1929 primary triangulation angles and coordinates are accurate to 8 s of arc and 35 cm respectively, and that the coordinates transform well into the current reference system with average residuals of 26 cm across nine control points, demonstrating the high quality of the 1929 work.Villar-Cano, M.; Marqués-Mateu, Á.; Jiménez-Martínez, MJ. (2020). Triangulation network of 1929-1944 of the first 1:500 urban map of València. Survey Review (Online). 52(373):317-329. https://doi.org/10.1080/00396265.2018.1564599S31732952373Bitelli, G., Cremonini, S., & Gatta, G. (2014). Cartographic heritage: Toward unconventional methods for quantitative analysis of pre-geodetic maps. Journal of Cultural Heritage, 15(2), 183-195. doi:10.1016/j.culher.2013.04.003Blachut, T. J., Chrzanowski, A., & Saastamoinen, J. H. (1979). Urban Surveying and Mapping. doi:10.1007/978-1-4612-6145-2Brinker, R. C., & Minnick, R. (Eds.). (1987). The Surveying Handbook. doi:10.1007/978-1-4757-1188-2Gatta, G. 2010. Valorizzazione di cartografia storica attraverso moderne tecniche geomatiche: recupero metrico, elaborazione e consultazione in ambiente digitale [Valuation of historic cartography using modern geomatics techniques: metric recovering, making and use in digital environment]. Doctoral thesis. Bologna: Universitá di Bologna. 295 pages. (In Italian).Gorse, C., Johnston, D., & Pritchard, M. (2012). A Dictionary of Construction, Surveying and Civil Engineering. doi:10.1093/acref/9780199534463.001.0001Hotine, M. (1939). THE RE-TRIANGULATION OF GREAT BRITAIN IV—BASE MEASUREMENT. Empire Survey Review, 5(34), 211-225. doi:10.1179/sre.1939.5.34.211Kahmen, H., & Faig, W. (1988). Surveying. doi:10.1515/9783110845716Leick, A., Rapoport, L., & Tatarnikov, D. (2015). GPS Satellite Surveying. doi:10.1002/9781119018612Murdin, P. (2009). Full Meridian of Glory. doi:10.1007/978-0-387-75534-2Schofield, W., & Breach, M. (2007). Engineering Surveying. doi:10.1201/b12847Seeber, G. (2003). Satellite Geodesy. doi:10.1515/9783110200089Snyder, J. P. (1987). Map projections: A working manual. Professional Paper. doi:10.3133/pp139

The power of a good idea: quantitative modeling of the spread of ideas from epidemiological models

The population dynamics underlying the diffusion of ideas hold many qualitative similarities to those involved in the spread of infections. In spite of much suggestive evidence this analogy is hardly ever quantified in useful ways. The standard benefit of modeling epidemics is the ability to estimate quantitatively population average parameters, such as interpersonal contact rates, incubation times, duration of infectious periods, etc. In most cases such quantities generalize naturally to the spread of ideas and provide a simple means of quantifying sociological and behavioral patterns. Here we apply several paradigmatic models of epidemics to empirical data on the advent and spread of Feynman diagrams through the theoretical physics communities of the USA, Japan, and the USSR in the period immediately after World War II. This test case has the advantage of having been studied historically in great detail, which allows validation of our results. We estimate the effectiveness of adoption of the idea in the three communities and find values for parameters reflecting both intentional social organization and long lifetimes for the idea. These features are probably general characteristics of the spread of ideas, but not of common epidemics.Comment: 31 pages, 8 figures, update in section

Search for single top quarks in the tau+jets channel using 4.8 fb−1^{-1} of ppˉp\bar{p} collision data

We present the first direct search for single top quark production using tau leptons. The search is based on 4.8 fb$^{-1}$ of integrated luminosity collected in $p\bar{p}$ collisions at $\sqrt{s}$=1.96 TeV with the D0 detector at the Fermilab Tevatron Collider. We select events with a final state including an isolated tau lepton, missing transverse energy, two or three jets, one or two of them $b$ tagged. We use a multivariate technique to discriminate signal from background. The number of events observed in data in this final state is consistent with the signal plus background expectation. We set in the tau+jets channel an upper limit on the single top quark cross section of \TauLimObs pb at the 95% C.L. This measurement allows a gain of 4% in expected sensitivity for the observation of single top production when combining it with electron+jets and muon+jets channels already published by the D0 collaboration with 2.3 fb$^{-1}$ of data. We measure a combined cross section of \SuperCombineXSall pb, which is the most precise measurement to date.Comment: 12 pages, 5 figure

b-Jet Identification in the D0 Experiment

Algorithms distinguishing jets originating from b quarks from other jet flavors are important tools in the physics program of the D0 experiment at the Fermilab Tevatron p-pbar collider. This article describes the methods that have been used to identify b-quark jets, exploiting in particular the long lifetimes of b-flavored hadrons, and the calibration of the performance of these algorithms based on collider data.Comment: submitted to Nuclear Instruments and Methods in Physics Research

Measurement of the dijet invariant mass cross section in proton anti-proton collisions at sqrt{s} = 1.96 TeV

The inclusive dijet production double differential cross section as a function of the dijet invariant mass and of the largest absolute rapidity of the two jets with the largest transverse momentum in an event is measured in proton anti-proton collisions at sqrt{s} = 1.96 TeV using 0.7 fb^{-1} integrated luminosity collected with the D0 detector at the Fermilab Tevatron Collider. The measurement is performed in six rapidity regions up to a maximum rapidity of 2.4. Next-to-leading order perturbative QCD predictions are found to be in agreement with the data.Comment: Published in Phys. Lett. B, 693, (2010), 531-538, 8 pages, 2 figures, 6 table

Measurement of Z/gamma*+jet+X angular distributions in ppbar collisions at sqrt{s}=1.96 TeV

We present the first measurements at a hadron collider of differential cross sections for Z+jet+X production in delta phi(Z, jet), |delta y(Z, jet)| and |y_boost(Z, jet)|. Vector boson production in association with jets is an excellent probe of QCD and constitutes the main background to many small cross section processes, such as associated Higgs production. These measurements are crucial tests of the predictions of perturbative QCD and current event generators, which have varied success in describing the data. Using these measurements as inputs in tuning event generators will increase the experimental sensitivity to rare signals.Comment: Published in Physics Letters B 682 (2010), pp. 370-380. 15 pages, 6 figure

Search for the standard model Higgs boson in tau final states

We present a search for the standard model Higgs boson using hadronically decaying tau leptons, in 1 inverse femtobarn of data collected with the D0 detector at the Fermilab Tevatron ppbar collider. We select two final states: tau plus missing transverse energy and b jets, and tau+ tau- plus jets. These final states are sensitive to a combination of associated W/Z boson plus Higgs boson, vector boson fusion and gluon-gluon fusion production processes. The observed ratio of the combined limit on the Higgs production cross section at the 95% C.L. to the standard model expectation is 29 for a Higgs boson mass of 115 GeV.Comment: publication versio

Search for scalar bottom quarks and third-generation leptoquarks in ppbar collisions at sqrt(s) = 1.96 TeV

We report the results of a search for pair production of scalar bottom quarks (sbottom) and scalar third-generation leptoquarks in 5.2 fb-1 of ppbar collisions at the D0 experiment of the Fermilab Tevatron Collider. Scalar bottom quarks are assumed to decay to a neutralino and a $b$ quark, and we set 95% C.L. lower limits on their production in the (m_sbottom, m_neutralino) mass plane such as m_sbottom>247 GeV for m_neutralino=0 and m_neutralino>110 GeV for 160<m_sbottom<200 GeV. The leptoquarks are assumed to decay to a tau neutrino and a $b$ quark, and we set a 95% C.L. lower limit of 247 GeV on the mass of a charge-1/3 third-generation scalar leptoquark.Comment: Published by Phys. Lett.

Search for the associated production of a b quark and a neutral supersymmetric Higgs boson which decays to tau pairs

We report results from a search for production of a neutral Higgs boson in association with a $b$ quark. We search for Higgs decays to $\tau$ pairs with one $\tau$ subsequently decaying to a muon and the other to hadrons. The data correspond to 2.7fb$^{-1}$ of \ppbar collisions recorded by the D0 detector at $\sqrt{s} = 1.96$TeV. The data are found to be consistent with background predictions. The result allows us to exclude a significant region of parameter space of the minimal supersymmetric model.Comment: Submitted to Phys. Rev. Letter