Development of sunlight-driven eutectic phase change material nanocomposite for applications in solar water heating

Organic phase change materials (PCMs) have been utilized as latent heat energy storage medium for effective thermal management. In this work, a PCM nanocomposite, consisting of a mixture of two organic PCMs (referred to as eutectic gel PCM) and minimal amount (0.5 wt%) of nanographite (NG) as a supporting material, was prepared. Differential scanning calorimeter was used to determine the melting temperature and latent heat of pristine PCM, paraffin (61.5 °C and 161.5 J/g), eutectic gel PCM (54 °C and 158 J/g) and eutectic gel PCM nanocomposite (53.5 °C and 155 J/g). The prepared PCM nanocomposites exhibited enhanced thermal conductivity and ultrafast thermal charging characteristics. The nanocomposites were employed for two different applications: (i) providing hot water using an indigenously fabricated solar water heating (SWH) system and (ii) solar rechargeable glove that can be rapidly warmed and used. Experimental results on SWH system show that the use of PCM nanocomposites helps to increase the charging rate of PCM while reducing the discharging rate of heat by PCM to water, thus enhancing the maximum utilization of solar energy and hence improving the efficiency of the SWH system. The experimental results on solar rechargeable glove revealed that the glove has the ability to retain the temperature up to 3 hours

Critical Analysis of PIM2 Score Applicability in a Tertiary Care PICU in Western India

Objective. Children have limited physiological reserve that deteriorates rapidly. Present study profiled patients admitted to PICU and determined PIM2 score applicability in Indian setting. Patients and Methods. Prospective observational study. Results. In 742 consecutive admissions, male : female ratio was 1.5 : 1, 35.6% patients were ventilated, observed mortality was 7%, and 26.4% were <1 year. The profile included septicemia and septic shock (29.6%), anemia (27.1%), pneumonia (19.6%), and meningitis and encephalitis (17.2%). For the first year, sensitivity of PIM2 was 65.8% and specificity was 71% for cutoff value at 1.9 by ROC curve analysis. The area under the curve was 0.724 (95% CI: 0.69, 0.76). This cutoff was validated for second year data yielding similar sensitivity (70.6%) and specificity (65%). Logistic regression analysis (LRA) over entire data revealed various variables independently associated with mortality along with PIM2 score. Another logistic model with same input variables except PIM2 yielded the same significant variables with Nagelkerke R square of 0.388 and correct classification of 78.5 revealing contribution of PIM2 in predicting mortality is meager. Conclusion. Infectious diseases were the commonest cause of PICU admission and mortality. PIM2 scoring did not explain the outcome adequately, suggesting need for recalibration. Following PALS/GEM guidelines was associated with better outcome

Predictive modeling for perinatal mortality in resource-limited settings

Importance: The overwhelming majority of fetal and neonatal deaths occur in low- and middle-income countries. Fetal and neonatal risk assessment tools may be useful to predict the risk of death.Objective: To develop risk prediction models for intrapartum stillbirth and neonatal death.Design, setting, and participants: This cohort study used data from the Eunice Kennedy Shriver National Institute of Child Health and Human Development Global Network for Women\u27s and Children\u27s Health Research population-based vital registry, including clinical sites in South Asia (India and Pakistan), Africa (Democratic Republic of Congo, Zambia, and Kenya), and Latin America (Guatemala). A total of 502 648 pregnancies were prospectively enrolled in the registry.Exposures: Risk factors were added sequentially into the data set in 4 scenarios: (1) prenatal, (2) predelivery, (3) delivery and day 1, and (4) postdelivery through day 2.Main outcomes and measures: Data sets were randomly divided into 10 groups of 3 analysis data sets including training (60%), test (20%), and validation (20%). Conventional and advanced machine learning modeling techniques were applied to assess predictive abilities using area under the curve (AUC) for intrapartum stillbirth and neonatal mortality.Results: All prenatal and predelivery models had predictive accuracy for both intrapartum stillbirth and neonatal mortality with AUC values 0.71 or less. Five of 6 models for neonatal mortality based on delivery/day 1 and postdelivery/day 2 had increased predictive accuracy with AUC values greater than 0.80. Birth weight was the most important predictor for neonatal death in both postdelivery scenarios with independent predictive ability with AUC values of 0.78 and 0.76, respectively. The addition of 4 other top predictors increased AUC to 0.83 and 0.87 for the postdelivery scenarios, respectively.Conclusions and relevance: Models based on prenatal or predelivery data had predictive accuracy for intrapartum stillbirths and neonatal mortality of AUC values 0.71 or less. Models that incorporated delivery data had good predictive accuracy for risk of neonatal mortality. Birth weight was the most important predictor for neonatal mortality

Optical control of in-plane domain configuration and domain wall motion in ferroelectric and ferroelastic

The sensitivity of ferroelectric domain walls to external stimuli makes them functional entities in nanoelectronic devices. Specifically, optically driven domain reconfiguration with in-plane polarization is advantageous and thus highly sought. Here, we show the existence of in-plane polarized sub-domains imitating a single domain state and reversible optical control of its domain wall movement in a single-crystal of ferroelectric BaTiO3. Similar optical control in the domain configuration of non-polar ferroelastic material indicates long-range ferroelectric polarization is not essential for the optical control of domain wall movement. Instead, flexoelectricity is found to be an essential ingredient for the optical control of the domain configuration and hence, ferroelastic materials would be another possible candidate for nanoelectronic device applications

A rare case of giant leiomyosarcoma in a filarial scrotum: a case report

Giant leiomyosarcoma of scrotum is a rare tumour. A case of scrotum leiomyosarcoma is presented in a 67 year old patient with scrotal filariasis which was managed successfully with total scrotectomy with bilateral orchidectomy, degloved penis reconstructed with rotation advancement supra pubic fasciocutaneous flap. We made a literature search proving the rarity of this lesion type. Only 36 cases have been described and the first case in a filarial scrotu

Predictive Modeling for Perinatal Mortality in Resource-Limited Settings.

Importance: The overwhelming majority of fetal and neonatal deaths occur in low- and middle-income countries. Fetal and neonatal risk assessment tools may be useful to predict the risk of death. Objective: To develop risk prediction models for intrapartum stillbirth and neonatal death. Design, Setting, and Participants: This cohort study used data from the Eunice Kennedy Shriver National Institute of Child Health and Human Development Global Network for Women\u27s and Children\u27s Health Research population-based vital registry, including clinical sites in South Asia (India and Pakistan), Africa (Democratic Republic of Congo, Zambia, and Kenya), and Latin America (Guatemala). A total of 502 648 pregnancies were prospectively enrolled in the registry. Exposures: Risk factors were added sequentially into the data set in 4 scenarios: (1) prenatal, (2) predelivery, (3) delivery and day 1, and (4) postdelivery through day 2. Main Outcomes and Measures: Data sets were randomly divided into 10 groups of 3 analysis data sets including training (60%), test (20%), and validation (20%). Conventional and advanced machine learning modeling techniques were applied to assess predictive abilities using area under the curve (AUC) for intrapartum stillbirth and neonatal mortality. Results: All prenatal and predelivery models had predictive accuracy for both intrapartum stillbirth and neonatal mortality with AUC values 0.71 or less. Five of 6 models for neonatal mortality based on delivery/day 1 and postdelivery/day 2 had increased predictive accuracy with AUC values greater than 0.80. Birth weight was the most important predictor for neonatal death in both postdelivery scenarios with independent predictive ability with AUC values of 0.78 and 0.76, respectively. The addition of 4 other top predictors increased AUC to 0.83 and 0.87 for the postdelivery scenarios, respectively. Conclusions and Relevance: Models based on prenatal or predelivery data had predictive accuracy for intrapartum stillbirths and neonatal mortality of AUC values 0.71 or less. Models that incorporated delivery data had good predictive accuracy for risk of neonatal mortality. Birth weight was the most important predictor for neonatal mortality

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI

Penilaian Kinerja Keuangan Koperasi di Kabupaten Pelalawan

This paper describe development and financial performance of cooperative in District Pelalawan among 2007 - 2008. Studies on primary and secondary cooperative in 12 sub-districts. Method in this stady use performance measuring of productivity, efficiency, growth, liquidity, and solvability of cooperative. Productivity of cooperative in Pelalawan was highly but efficiency still low. Profit and income were highly, even liquidity of cooperative very high, and solvability was good