Modelling wave-current interactions off the east coast of Scotland

Densely populated coastal areas of the North Sea are particularly vulnerable to severe wave conditions, which overtop or damage sea-defences leading to dangerous flooding. Around the shallow southern North Sea, where the coastal margin is low-lying and population density is high, oceanographic modelling has helped to develop forecasting systems to predict flood risk. However coastal areas of the deeper northern North Sea are also subject to regular storm damage but there has been little or no effort to develop coastal wave models for these waters. Here we present a high spatial resolution model of northeast Scottish coastal waters, simulating waves and the effect of tidal currents on wave propagation, driven by global ocean tides, far-field wave conditions, and local air pressure and wind stress. We show that the wave- current interactions and wave-wave interactions are particularly important for simulating the wave conditions close to the coast at various locations. The model can simulate the extreme conditions experienced when high (spring) tides are combined with sea-level surges and large Atlantic swell. Such a combination of extremes represents a high risk for damaging conditions along the Scottish coast

Conventional CT versus Dedicated CT Angiography in DIEP Flap Planning: A Feasibility Study

The deep inferior epigastric perforator (DIEP) flap is used with increasing frequency in post-mastectomy breast reconstruction. Preoperative mapping with CT angiography (CTa) is crucial in reducing surgical complications and optimizing surgical techniques. Our study\u2019s goal was to investigate the accuracy of conventional CT (cCT), performed during disease staging, compared to CTa in preoperative DIEP flap planning. In this retrospective, single-center study, we enrolled patients scheduled for mastectomy and DIEP flap breast reconstruction, subjected to cCT within 24 months after CTa. We included 35 patients in the study. cCT accuracy was 95% (CI 0.80\u20130.98) in assessing the three largest perforators, 100% (CI 0.89\u2013100) in assessing the dominant perforator, 93% (CI 0.71\u20130.94) in assessing the perforator intramuscular course, and 90.6% (CI 0.79\u20130.98) in assessing superficial venous communications. Superficial inferior epigastric artery (SIEA) caliber was recognized in 90% of cases (CI 0.84\u20130.99), with an excellent assessment of superficial inferior epigastric vein (SIEV) integrity (96% of cases, CI 0.84\u20130.99), and a lower accuracy in the evaluation of deep inferior epigastric artery (DIEA) branching type (85% of cases, CI 0.69\u20130.93). The mean X-ray dose spared would have been 788 \ub1 255 mGy/cm. Our study shows that cCT is as accurate as CTa in DIEP flap surgery planning

Study of production and cold nuclear matter effects in pPb collisions at=5 TeV

Production of mesons in proton-lead collisions at a nucleon-nucleon centre-of-mass energy = 5 TeV is studied with the LHCb detector. The analysis is based on a data sample corresponding to an integrated luminosity of 1.6 nb(-1). The mesons of transverse momenta up to 15 GeV/c are reconstructed in the dimuon decay mode. The rapidity coverage in the centre-of-mass system is 1.5 < y < 4.0 (forward region) and -5.0 < y < -2.5 (backward region). The forward-backward production ratio and the nuclear modification factor for (1S) mesons are determined. The data are compatible with the predictions for a suppression of (1S) production with respect to proton-proton collisions in the forward region, and an enhancement in the backward region. The suppression is found to be smaller than in the case of prompt J/psi mesons

Measurement of the Ξ^-_b and Ω^-_b baryon lifetimes

Using a data sample of pp collisions corresponding to an integrated luminosity of $3~ \rm fb^{-1}$, the $\Xi_b^-$ and $\Omega_b^-$ baryons are reconstructed in the $\Xi_b^- \rightarrow J/\psi \Xi^-$ and $\Omega_b^- \rightarrow J/\psi \Omega^-$ decay modes and their lifetimes measured to be \tau (\Xi_b^-) = 1.55\, ^{+0.10}_{-0.09}~{\rm(stat)} \pm 0.03\,{\rm(syst)} ps, \tau (\Omega_b^-) = 1.54\, ^{+0.26}_{-0.21}~{\rm(stat)} \pm 0.05\,{\rm(syst)} ps. These are the most precise determinations to date. Both measurements are in good agreement with previous experimental results and with theoretical predictions

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

ELECTROCHEMICAL MICROREACTORS FOR SYNTHESIS OF CHEMICALS AND ABATEMENT OF ORGANIC POLLUTTANTS

Electrochemical methods can offer new sustainable routes for both the synthesis of chemicals and the abatement of organic pollutants resistant to biological processes. These methods use a clean reagent, the electron, and very mild operative conditions (ambient temperature and atmospheric pressure) with limited operative costs. However, electrochemical processes present some important disadvantages when performed in conventional reactors. In particular, to achieve reasonable cell voltages when the medium has not an adequate conductivity, one needs adding to the system a supporting electrolyte. This is certainly a main obstacle for a wide application of electrochemical tools. Indeed, adding chemicals is often a problematic issue, since this may lead to the formation of secondary products, makes more difficult the separation procedures and increases the operative costs. Recently it has been shown that the electrochemical processes can strongly benefit from the utilization of microfluidic electrochemical reactors (i.e. cells with a distance between the cathode and the anode of tens or hundreds of micrometers) allowing to minimize or even remove some of the above mentioned disadvantages. Thus, very small distances between electrodes lead from one side to a drastic reduction of the ohmic resistances, (allowing to operate with lower cell voltages and without supporting electrolyte), and on the other side to intensify the mass transport of the reagents towards electrodes surfaces. The utilization of micro devices may present the drawback of a more easy fouling but also other potential advantages such as an easier scale-up procedure through simple parallelization of many small units. Furthermore, since a very high conversion for passage can be achieved, the process can be performed under a continuous mode thus allowing a fast screening of the effect of operative parameters due to very short times of treatment. It would be also possible to operate with a series of micro cells with different applied current densities thus increasing both the current efficiency and the productivity of the cell [1-5]. In the present work some model processes of synthesis of fine chemicals and electrochemical abatement of pollutants were studied in microfluidic cells and in a stack with multiple cells in series with the aim of evaluating the advantages given by the utilization of microfluidic reactors

Gadoid numbers and speed, and environmental characteristics in the South Arran Marine Protected Area

Nature conservation and fisheries management often focuses on particular seabed features that are considered vulnerable or important to commercial species. As a result, individual seabed types are protected in isolation, without any understanding of what effect the mixture of seabed types within the landscape has on ecosystem functions. Here we undertook predictive seabed modelling within a coastal marine protected area using observations from underwater stereo-video camera deployments and environmental information (depth, wave fetch, maximum tidal speeds, distance from coast and underlying geology). The effect of the predicted substratum type, extent and heterogeneity or the diversity of substrata, within a radius of 1500 m around each camera deployment of juvenile gadoid relative abundance was analysed. The predicted substratum model performed well with wave fetch and depth being the most influential predictor variables. Gadus morhua (Atlantic cod) were associated with relatively more rugose substrata (Algal-gravel-pebble and seagrass) and heterogeneous landscapes, than Melanogrammus aeglefinus (haddock) or Merlangius merlangus (whiting) (sand and mud). An increase in M. merlangus relative abundance was observed with increasing substratum extent. These results reveal that landscape effects should be considered when protecting the seabed for fish and not just individual seabed types. The landscape approach used in this study therefore has important implications for marine protected area, fisheries management and monitoring advice concerning demersal fish populations