Procesadores de bajo coste y su aplicación en la docencia de Ingeniería de Computadores

La Informática evoluciona a gran velocidad y es necesario actualizar con frecuencia los recursos de aprendizaje para mantener el interés de los estudiantes. En la actualidad, hay una gran diversidad de plataformas de cómputo de bajo coste que son utilizadas como recursos en los estudios de Informática. Raspberry Pi y algunos modelos de Arduino (como Arduino Due), ambas basadas en procesadores ARM, son ejemplos representativos de este tipo de plataformas. Las arquitecturas ARM son ejemplos de procesadores RISC que actualmente gozan de gran popularidad por su buena relación entre potencia computacional, consumo y coste. De hecho, constituyen el núcleo de muchos de los teléfonos móviles y sistemas empotrados actuales. Al estar tan cerca de los estudiantes, el uso de este tipo de recursos en el aula representa una oportunidad para: (1) motivar a los alumnos de Bachillerato y Educación Secundaria para estudiar el Grado de Informática y (2) potenciar el interés de los alumnos de Grado de Informática por la Ingeniería de Computadores. Existe una serie de eventos consolidados que tienen una gran difusión social. En ellos, se muestran vistosos ejemplos de aplicación y funcionamiento de este tipo de plataformas. En este trabajo se describen el conjunto de sistemas interactivos y basados en plataformas computacionales de bajo coste que se han desarrollado para ser utilizadas en este tipo de eventos. De acuerdo con nuestra experiencia de participación, creemos que están sirviendo para despertar el interés del alumno de secundaria por la Informática en general, y más específicamente por la Ingeniería de Computadores. Por otra parte, un porcentaje de los alumnos que cursan el Grado de Ingeniería Informática no está interesado en el análisis de los componentes hardware y de su organización para construir un computador moderno. Piensan que la asignatura de Arquitectura de Computadores del Grado en Ingeniería Informática está lejos de su futura actividad profesional. En este contexto, nos planteamos seleccionar ARM como arquitectura de referencia para desarrollar los contenidos de la asignatura de Arquitectura de Computadores. Creemos que esta decisión mejora el interés del alumno por dos motivos: (1) el objeto de estudio se usa en multitud de plataformas muy cotidianas para el alumno y (2) es posible diseñar las actividades prácticas de las asignaturas basadas en elementos reales y no únicamente virtuales. Este trabajo muestra las distintas actividades tanto a nivel teórico como práctico que se plantean al alumno en el marco de la asignatura Arquitectura de Computadores.Computer Science is advancing rapidly and it is necessary to keep the educational resources up to date in order to keep the interest of students. Nowadays, there is a wide variety of low-cost computing platforms that are used as educational resources in the Computer Science degree. Raspberry Pi and some models of Arduino (such as Arduino Due), which are both based on ARM processors, are representative examples of this kind of platforms. ARM architectures are instances of RISC processors which nowadays have reached an important popularity due to their good relation between performance, consumption and cost. In fact, they constitute the core of numerous current mobile phones and embedded systems. Considering their proximity to the students, the use of this kind of resources in the classroom is an opportunity to: (1) encourage the high schools pupils to study the Computer Science degree and (2) to increase the interest of the students for the Computer Engineering. There are several consolidated informational events of great social outreach in which different examples of application of this kind of platforms are shown. In this work, the set of interactive systems designed to be used in this kind of events is described. According to our experience, we think that they arouse the interest of high schools pupils for the Computer Science in general, and, more specifically, for the Computer Engineering. Furthermore, a percentage of the students of the Computer Science degree is not interested in the analysis of hardware components and the architecture of modern computers. They think that the subject of Computer Architecture of the Computer Science Degree is far from his/her future career. In this context, we will select ARM as a reference architecture where the contents of the subject Computer Architecture will be developed on. We think this might improve the motivation of the students mainly for two reasons: (1) the object of study is being used in a lot of modern platforms; and (2) it is possible to design the practical activities of the subjects using real platforms and not only virtual ones. This work shows the activities proposed to the students in the context of the subject Computer Architecture, considering both practical and theoretical approaches

Assessment of plasma chitotriosidase activity, CCL18/PARC concentration and NP-C suspicion index in the diagnosis of Niemann-Pick disease type C: A prospective observational study

Background: Niemann-Pick disease type C (NP-C) is a rare, autosomal recessive neurodegenerative disease caused by mutations in either the NPC1 or NPC2 genes. The diagnosis of NP-C remains challenging due to the non-specific, heterogeneous nature of signs/symptoms. This study assessed the utility of plasma chitotriosidase (ChT) and Chemokine (C-C motif) ligand 18 (CCL18)/pulmonary and activation-regulated chemokine (PARC) in conjunction with the NP-C suspicion index (NP-C SI) for guiding confirmatory laboratory testing in patients with suspected NP-C. Methods: In a prospective observational cohort study, incorporating a retrospective determination of NP-C SI scores, two different diagnostic approaches were applied in two separate groups of unrelated patients from 51 Spanish medical centers (n = 118 in both groups). From Jan 2010 to Apr 2012 (Period 1), patients with =2 clinical signs/symptoms of NP-C were considered ''suspected NP-C'' cases, and NPC1/NPC2 sequencing, plasma chitotriosidase (ChT), CCL18/PARC and sphingomyelinase levels were assessed. Based on findings in Period 1, plasma ChT and CCL18/PARC, and NP-C SI prediction scores were determined in a second group of patients between May 2012 and Apr 2014 (Period 2), and NPC1 and NPC2 were sequenced only in those with elevated ChT and/or elevated CCL18/PARC and/or NP-C SI =70. Filipin staining and 7-ketocholesterol (7-KC) measurements were performed in all patients with NP-C gene mutations, where possible. Results: In total across Periods 1 and 2, 10/236 (4%) patients had a confirmed diagnosis o NP-C based on gene sequencing (5/118 4.2%] in each Period): all of these patients had two causal NPC1 mutations. Single mutant NPC1 alleles were detected in 8/236 (3%) patients, overall. Positive filipin staining results comprised three classical and five variant biochemical phenotypes. No NPC2 mutations were detected. All patients with NPC1 mutations had high ChT activity, high CCL18/PARC concentrations and/or NP-C SI scores =70. Plasma 7-KC was higher than control cut-off values in all patients with two NPC1 mutations, and in the majority of patients with single mutations. Family studies identified three further NP-C patients. Conclusion: This approach may be very useful for laboratories that do not have mass spectrometry facilities and therefore, they cannot use other NP-C biomarkers for diagnosis

Measurements of differential production cross sections for a Z boson in association with jets in pp collisions at root s=8 TeV

Peer reviewe

Erratum: "A Gravitational-wave Measurement of the Hubble Constant Following the Second Observing Run of Advanced LIGO and Virgo" (2021, ApJ, 909, 218)

[no abstract available

Comparación de distintas estrategias para la predicción de muerte a corto plazo en el paciente anciano infectado

Objective. The aim of this study was to determine the utility of a post hoc lactate added to SIRS and qSOFA score to predict 30-day mortality in older non-severely dependent patients attended for infection in the Emergency Department (ED). Methods. We performed an analytical, observational, prospective cohort study including patients of 75 years of age or older, without severe functional dependence, attended for an infectious disease in 69 Spanish ED for 2-day three seasonal periods. Demographic, clinical and analytical data were collected. The primary outcome was 30-day mortality after the index event. Results. We included 739 patients with a mean age of 84.9 (SD 6.0) years; 375 (50.7%) were women. Ninety-one (12.3%) died within 30 days. The AUC was 0.637 (IC 95% 0.587-0.688; p= 2 and 0.698 (IC 95% 0.635- 0.761; p= 2. Comparing receiver operating characteristic (ROC) there was a better accuracy of qSOFA vs SIRS (p=0.041). Both scales improve the prognosis accuracy with lactate inclusion. The AUC was 0.705 (IC95% 0.652-0.758; p<0.001) for SIRS plus lactate and 0.755 (IC95% 0.696-0.814; p<0.001) for qSOFA plus lactate, showing a trend to statistical significance for the second strategy (p=0.0727). Charlson index not added prognosis accuracy to SIRS (p=0.2269) or qSOFA (p=0.2573). Conclusions. Lactate added to SIRS and qSOFA score improve the accuracy of SIRS and qSOFA to predict short-term mortality in older non-severely dependent patients attended for infection. There is not effect in adding Charlson index

Charged-particle nuclear modification factors in PbPb and pPb collisions at √=sNN=5.02 TeV

The spectra of charged particles produced within the pseudorapidity window |η| < 1 at √ sNN = 5.02 TeV are measured using 404 µb −1 of PbPb and 27.4 pb−1 of pp data collected by the CMS detector at the LHC in 2015. The spectra are presented over the transverse momentum ranges spanning 0.5 < pT < 400 GeV in pp and 0.7 < pT < 400 GeV in PbPb collisions. The corresponding nuclear modification factor, RAA, is measured in bins of collision centrality. The RAA in the 5% most central collisions shows a maximal suppression by a factor of 7–8 in the pT region of 6–9 GeV. This dip is followed by an increase, which continues up to the highest pT measured, and approaches unity in the vicinity of pT = 200 GeV. The RAA is compared to theoretical predictions and earlier experimental results at lower collision energies. The newly measured pp spectrum is combined with the pPb spectrum previously published by the CMS collaboration to construct the pPb nuclear modification factor, RpA, up to 120 GeV. For pT > 20 GeV, RpA exhibits weak momentum dependence and shows a moderate enhancement above unity

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Numerical modeling parameters by the finite elements method for a hollow concrete block under uniaxial compression load [Parámetros de modelación numérica mediante elementos finitos para un bloque hueco de concreto bajo carga de compresión uniaxial]

The growing demand in modern industry requires increasingly greater demands on the structural performance of the employed materials and, therefore, it has been seen that is necessary to implement a series of numerical models that allow to adequately predict the mechanical behavior of the materials that are subjected to severe loading conditions. All these numerical models require, as input parameters, the main elastic and plastic behavior coefficients of the materials, which in the case of concrete and steel, are well known parameters that are already tabulated in most materials mechanics texts. In the case of structural masonry, the main parameters for the numerical models are very limited in the state of the art, and they are mostly obtained from laboratory tests of the masonry units, which in many cases do not faithfully represent the structural performance of the raw material that constitutes the unit, mainly due to the confinement generated by the geometry of the units and the different volumetric strain conditions to which the same masonry unit is subjected under the application of a punctual load. In the present research a numerical model by means of finite elements is developed. The model allows to establish a correlation of the linear and nonlinear properties of a hollow block of concrete with the experimental results obtained from a set of uniaxial compression laboratory tests. The results of this research will be used in the future for the analysis of masonry structures, especially the post-tensioned type. © 2020 AISTI

Voto de los jóvenes universitarios bogotanos: la fuerza del ejemplo en pos de la transformación de los resultados del plebiscito del 2 de octubre de 2016 en Colombia

The force of the example - a fact that enable to combine what it is and what is should be in order to get something like it is what it should be (Ferrara, 2008) - is the idea that encapsulates the main findings from a research by the Media Observatory of the Communication Department of the Universidad de La Sabana on the vote by the college youth in Bogotá, during the plebiscite carried out on October 2, 2016. Opposite to the expectations and in contrast with adult people that decided to not participate, the young students voted and backed the peace agreement signed by the Government and the FARC guerrillas. When the "YES" was defeated in the voting, the youth did a mobilization to set an example with their action and claim a transformation on the adverse results to have a new opportunity for the peace. © 2022 Pontificia Universidad Javeriana. All rights reserved

Procesadores de bajo coste y su aplicación en la docencia de Ingeniería de Computadores

La Informática evoluciona a gran velocidad y es necesario actualizar con frecuencia los recursos de aprendizaje para mantener el interés de los estudiantes. En la actualidad, hay una gran diversidad de plataformas de cómputo de bajo coste que son utilizadas como recursos en los estudios de Informática. Raspberry Pi y algunos modelos de Arduino (como Arduino Due), ambas basadas en procesadores ARM, son ejemplos representativos de este tipo de plataformas. Las arquitecturas ARM son ejemplos de procesadores RISC que actualmente gozan de gran popularidad por su buena relación entre potencia computacional, consumo y coste. De hecho, constituyen el núcleo de muchos de los teléfonos móviles y sistemas empotrados actuales. Al estar tan cerca de los estudiantes, el uso de este tipo de recursos en el aula representa una oportunidad para: (1) motivar a los alumnos de Bachillerato y Educación Secundaria para estudiar el Grado de Informática y (2) potenciar el interés de los alumnos de Grado de Informática por la Ingeniería de Computadores. Existe una serie de eventos consolidados que tienen una gran difusión social. En ellos, se muestran vistosos ejemplos de aplicación y funcionamiento de este tipo de plataformas. En este trabajo se describen el conjunto de sistemas interactivos y basados en plataformas computacionales de bajo coste que se han desarrollado para ser utilizadas en este tipo de eventos. De acuerdo con nuestra experiencia de participación, creemos que están sirviendo para despertar el interés del alumno de secundaria por la Informática en general, y más específicamente por la Ingeniería de Computadores. Por otra parte, un porcentaje de los alumnos que cursan el Grado de Ingeniería Informática no está interesado en el análisis de los componentes hardware y de su organización para construir un computador moderno. Piensan que la asignatura de Arquitectura de Computadores del Grado en Ingeniería Informática está lejos de su futura actividad profesional. En este contexto, nos planteamos seleccionar ARM como arquitectura de referencia para desarrollar los contenidos de la asignatura de Arquitectura de Computadores. Creemos que esta decisión mejora el interés del alumno por dos motivos: (1) el objeto de estudio se usa en multitud de plataformas muy cotidianas para el alumno y (2) es posible diseñar las actividades prácticas de las asignaturas basadas en elementos reales y no únicamente virtuales. Este trabajo muestra las distintas actividades tanto a nivel teórico como práctico que se plantean al alumno en el marco de la asignatura Arquitectura de Computadores.Computer Science is advancing rapidly and it is necessary to keep the educational resources up to date in order to keep the interest of students. Nowadays, there is a wide variety of low-cost computing platforms that are used as educational resources in the Computer Science degree. Raspberry Pi and some models of Arduino (such as Arduino Due), which are both based on ARM processors, are representative examples of this kind of platforms. ARM architectures are instances of RISC processors which nowadays have reached an important popularity due to their good relation between performance, consumption and cost. In fact, they constitute the core of numerous current mobile phones and embedded systems. Considering their proximity to the students, the use of this kind of resources in the classroom is an opportunity to: (1) encourage the high schools pupils to study the Computer Science degree and (2) to increase the interest of the students for the Computer Engineering. There are several consolidated informational events of great social outreach in which different examples of application of this kind of platforms are shown. In this work, the set of interactive systems designed to be used in this kind of events is described. According to our experience, we think that they arouse the interest of high schools pupils for the Computer Science in general, and, more specifically, for the Computer Engineering. Furthermore, a percentage of the students of the Computer Science degree is not interested in the analysis of hardware components and the architecture of modern computers. They think that the subject of Computer Architecture of the Computer Science Degree is far from his/her future career. In this context, we will select ARM as a reference architecture where the contents of the subject Computer Architecture will be developed on. We think this might improve the motivation of the students mainly for two reasons: (1) the object of study is being used in a lot of modern platforms; and (2) it is possible to design the practical activities of the subjects using real platforms and not only virtual ones. This work shows the activities proposed to the students in the context of the subject Computer Architecture, considering both practical and theoretical approaches