163 research outputs found
Characterization and Mitigation of Hyper-Rayleigh Fading
Due to the unprecedented spatial and temporal resolution they offer, wireless sensor networks are considered an enabling technology for the distributed monitoring of industrial, military, and natural environments. As these systems migrate into vastly different and novel applications, new constraints are discovered that affect network reliability and utility. For example, wireless sensors are typically statically deployed and, unlike mobile systems, cannot move to a new location for better radio reception. As a result, the signal fades caused by non-optimal environmental conditions can increase the outage probability of the system, potentially rendering the network unreliable and ineffectual. Stochastic models that quantify link reliability and the effectiveness of diversity methods are often employed to understand the impact of such fading. However, the performance of these models applied to wireless sensor networks is entirely dependent on the appropriateness of the model with respect to the environment. This work first presents an empirical study of the propagation environment for a wingless, rotary aircraft, showing that the wireless environment within exhibits frequency-selective fading much more severe than predicted by current worst-case models (i.e., Rayleigh). An analysis is then given of the effectiveness of several diversity methods operating within such environments (referred to as hyper-Rayleigh). These fade mitigation techniques are simple enough to be employed for use with low-complexity wireless sensor hardware, and include spatial diversity, polar diversity, two-element passive combining, and two-element phased combining. Two-element phased combining is further developed by examining the effect that smaller element spacing has on diversity gain. A demonstration of a wireles
Short communication : Modeling competing effects of cooling rate, grain size, and radiation damage in low-temperature thermochronometers
Funding Information: Financial support. This research has been supported by the NSERC Discovery, and from the Geological Survey of Canada, Natural Resources Canada. Publisher Copyright: © Copyright:Low-temperature multi-thermochronometry, in which the (U-Th)ĝ€¯/ĝ€¯He and fission track methods are applied to minerals such as zircon and apatite, is a valuable approach for documenting rock cooling histories and relating them to geological processes. Here we explore the behaviors of two of the most commonly applied low-temperature thermochronometers, (U-Th)ĝ€¯/ĝ€¯He in zircon (ZHe) and apatite (AHe), and directly compare them against the apatite fission track (AFT) thermochronometer for different forward-modeled cooling scenarios. We consider the impacts that common variations in effective spherical radius (ESR) and effective uranium concentration (eU) may have on cooling ages and closure temperatures under a range of different cooling rates. This exercise highlights different scenarios under which typical age relationships between these thermochronometers (ZHe>AFT>AHe) are expected to collapse or invert (either partially or fully). We anticipate that these predictions and the associated software we provide will be a useful tool for teaching, planning low-temperature multi-thermochronometry studies, and for continued exploration of the relative behaviors of these thermochronometers in temperature-time space through forward models.Peer reviewe
学会抄録
<p>Confuciusornis, leveled 16bit data, resampled as cubic voxels, resliced in YZ plane</p>
<p>265 slices; TIF format; 2.520 Mb each</p>
<p>Voxel dimension X = 0.2148 mm</p>
<p>Voxel dimension Y = 0.2148 mm</p>
<p>Voxel dimension Z = 0.2148 mm</p>
<p>These data are 16bit leveled TIF files that are viewable in most viewers (see Usage Notes)</p
Constraining the long-term evolution of the slip rate for a major extensional fault system in the central Aegean, Greece, using thermochronology
The brittle/ductile transition is a major rheologic boundary in the crust yet little is known about how or if rates of tectonic processes are influenced by this boundary. In this study we examine the slip history of the large-scale Naxos/Paros extensional fault system (NPEFS), Cyclades, Greece, by comparing published slip rates for the ductile crust with new thermochronological constraints on slip rates in the brittle regime. Based on apatite and zircon fission-track (AFT and ZFT) and (U–Th)/He dating we observe variable slip rates across the brittle/ductile transition on Naxos. ZFT and AFT ages range from 11.8 ± 0.8 to 9.7 ± 0.8 Ma and 11.2 ± 1.6 to 8.2 ± 1.2 Ma and (U–Th)/He zircon and apatite ages are between 10.4 ± 0.4 to 9.2 ± 0.3 Ma and 10.7 ± 1.0 to 8.9 ± 0.6 Ma, respectively. On Paros, ZFT and AFT ages range from 13.1 ± 1.4 Ma to 11.1 ± 1.0 Ma and 12.7 ± 2.8 Ma to 10.5 ± 2.0 Ma while the (U–Th)/He zircon ages are slightly younger between 8.3 ± 0.4 Ma and 9.8 ± 0.3 Ma. All ages consistently decrease northwards in the direction of hanging wall transport. Most of our new thermochronological results and associated thermal modeling more strongly support the scenario of an identical fault dip and a constant or slightly accelerating slip rate of 6–8 km Myr− 1 on the NPEFS across the brittle/ductile transition. Even the intrusion of a large granodiorite body into the narrowing fault zone at 12 Ma on Naxos does not seem to have affected the thermal structure of the area in a way that would significantly disturb the slip rate. The data also show that the NPEFS accomplished a minimum total offset of 50 km between 16 and 8 Ma
Seamless low-temperature thermochronological modeling in Andino 3D, towards integrated structural and thermal simulations
We present the development of thermochronological tools for Andino 3D® software, that integrates Fetkin (Finite Element Temperature Kinematics). These tools allow the user to work on both the structural and the thermochronological model at the same time, providing a user-friendly environment that overcomes the need to work with different programs. Thermochronological and structural models can be checked and eventually corrected in a visual and intuitive form by following a 4-step workflow. The first step of such workflow is to define the thermochronological computing grid, checking in real time, if the resolution and coverage are satisfactory. After that, the interpolation process can be done, whereby velocity vectors for all nodes in beds and faults are calculated for all interpolated times. The third step of the workflow consists of filling thermal properties and velocities for all grid cells. The final step is the calculation of the thermal state at each time in the reconstruction. Boundary conditions (basal temperature, basal heat flow, surface temperature and altitude gradient) are defined by mouse picking as constant, spatially varying, time varying or spatially and time varying. To check the feasibility of a structural model, thermochronological samples can be defined at desired positions to predict time-temperature variations. Simulated fission track ages, mean track lengths and age standard deviations can be calculated for different minerals (apatite and zircons). Also, cooling ages and %Ro can be simulated for (U–Th-Sm)/He and vitrinite systems, respectively. The Carohuaicho structure in the southern Bolivia sub-Andean Ranges is presented as a case of study to demonstrate these tools. Andino 3D® allowed us to successfully simulate the t-T paths of four samples where (U–Th-Sm)/He measurements were available. The different models performed permitted us to conclude that a low geothermal gradient was likely to be present during the last 7 Ma of Andean deformation in the study region.Fil: Cristallini, Ernesto Osvaldo. La.te. Andes S.A. Thermochronology Lab; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Estudios Andinos "Don Pablo Groeber". Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Estudios Andinos "Don Pablo Groeber"; ArgentinaFil: Sánchez Nassif, Francisco Gabriel Antonio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro de Investigaciones en Ciencias de la Tierra. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Centro de Investigaciones en Ciencias de la Tierra; ArgentinaFil: Balciunas, Daniel Eduardo. La.te. Andes S.A. Thermochronology Lab; ArgentinaFil: Mora, Andrés. Ecopetrol Óleo e Gás do Brasil; BrasilFil: Ketcham, Richard. University of Texas at Austin; Estados UnidosFil: Nigro, Joaquín. La.te. Andes S.A. Thermochronology Lab; ArgentinaFil: Hernández, Juan. La.te. Andes S.A. Thermochronology Lab; ArgentinaFil: Hernández, Roberto. La.te. Andes S.A. Thermochronology Lab; Argentin
Structures Related to the Emplacement of Shallow-Level Intrusions
A systematic view of the vast nomenclature used to describe the structures of shallow-level intrusions is presented here. Structures are organised in four main groups, according to logical breaks in the timing of magma emplacement, independent of the scales of features: (1) Intrusion-related structures, formed as the magma is making space and then develops into its intrusion shape; (2) Magmatic flow-related structures, developed as magma moves with suspended crystals that are free to rotate; (3) Solid-state, flow-related structures that formed in portions of the intrusions affected by continuing flow of nearby magma, therefore considered to have a syn-magmatic, non-tectonic origin; (4) Thermal and fragmental structures, related to creation of space and impact on host materials. This scheme appears as a rational organisation, helpful in describing and interpreting the large variety of structures observed in shallow-level intrusions
Quantitative measurement of olivine composition in three dimensions using helical-scan X-ray micro-tomography
Olivine is a key constituent in the silicate Earth; its composition and texture informs petrogenetic understanding of numerous rock types. Here we develop a quantitative and reproducible method to measure olivine composition in three dimensions without destructive analysis, meaning full textural context is maintained. The olivine solid solution between forsterite and fayalite was measured using a combination of three-dimensional (3D) X-ray imaging techniques, 2D backscattered electron imaging, and spot-analyses using wavelength-dispersive electron probe microanalysis. The linear attenuation coefficient of natural crystals across a range of forsterite content from ∼73–91 mol% were confirmed to scale linearly with composition using 53, 60, and 70 kV monochromatic beams at I12-JEEP beamline, Diamond Light Source utilizing the helical fly-scan acquisition. A polychromatic X-ray source was used to scan the same crystals, which yielded image contrast equivalent to measuring the mol% of forsterite with an accuracy of 3 mm domains within a large crystal of San Carlos forsterite that varies by ∼2 Fo mol%. This offers a solution to an outstanding question of inter-laboratory standardization, and also demonstrates the utility of 3D, non-destructive, chemical measurement. To our knowledge, this study is the first to describe the application of XMT to quantitative chemical measurement across a mineral solid solution. Our approach may be expanded to calculate the chemistry of other mineral systems in 3D, depending upon the number, chemistry, and density of end-members
On-line measurement of the real size and shape of crystals in stirred tank crystalliser using non-invasive stereo vision imaging
Non-invasive stereo vision imaging technique was applied to monitoring a cooling crystallisation process in a stirred tank for real-time characterisation of the size and shape of needle-like l-glutamic acid (L-GA) β polymorphic crystals grown from solution. The instrument consists of two cameras arranged in an optimum angle that take 2D images simultaneously and are synchronised with the lighting system. Each 2D image pair is processed and analysed and then used to reconstruct the 3D shape of the crystal. The needle shaped L-GA β form crystal length thus obtained is found to be in good agreement with the result obtained from off-line analysis of crystal samples, and is about three times larger than that estimated using 2D imaging technique. The result demonstrates the advantage of 3D imaging over 2D in measurement of crystal real size and shape
Recommended from our members
Distribution of heat production in two metamorphic core complexes, Basin and Range province, Arizona : quantitative constraints on models of regional thermal structure
The amount and distribution of crustal heat production is a vital component of all estimates of continental thermal structure, yet it remains in most cases an assumption rather than a constraint. This study utilizes two Cordilleran metamorphic core complexes, the Catalina core complex and the Harquahala Mountains, as large and extensive exposures of the recent (<3O Ma) upper and middle crust of the southern Basin and Range of Arizona to gather primary heat production data. The depth distributions obtained do not follow a smooth or systematic function as predicted by models developed from the interpretation of linear relationships between surface heat flow and heat production; instead, they reflect a primary control exerted by the local structural or magmatic history. In each core complex, the amount of heat production observed plus that inferred to reside in the deeper crust is approximately 50% higher than predicted by standard estimates. This result is corroborated by variogram analysis of the data combined with published stochastic models. The difference results in overestimation of deep crustal temperatures by 150°C or more. Two-dimensional conductive thermal models of an evolving metamorphic core complex are utilized to provide insights into syn- and post-extensional thermal history. Model predictions of ancient cooling paths are remarkably consistent with estimates based on both structural and thermochronologic constraints, to the extent of reconciling seemingly conflicting data sets. The present-day heat flow patterns and low-relief Moho are most closely matched by a balanced geometry in which unroofing of the core complex is compensated by pure shear extension off-center, which may be analogous to models in which lower crustal flow compensates for tectonic denudation. The net amount of extension observed in Arizona core complexes does not appear to be sufficient to explain the high heat flow which characterizes the overall southern Basin and Range, indicating that additional sources of heat may be required. A new technique for determining concentrations of heat-producing elements in natural samples by gamma-ray scintillation spectrometry includes a test and partial correction for secular disequilibrium effects.Geological Science
- …