Simulating the Performance of a Heat Exchanger During Frosting

Factors affecting frost distribution are explored using a finite element model, developed and validated using a full-scale 8-row heat exchanger in a wind tunnel. The heat exchanger is typical of the type used in supermarket display cases; so face velocities and air inlet temperatures were varied from 0.5-2.3 m/s and 0 to -20 ??C, respectively, and inlet humidities from 70-90%. In order to focus on frost distribution, the prototype was designed to have a simple geometry and single-phase refrigerant to provide maximum certainty on parameters not directly related to frost. Measured and predicted total and sensible heat transfer agreed within RMS 6% and 8%, respectively, over the range of operating conditions. For latent heat, there was more scatter due to frost nonuniformities induced by the experimental apparatus. The simulation model was used to illustrate how the point of maximum frost thickness moved from the front to the rear of the heat exchanger, depending on face velocity, inlet humidity and fin surface temperature. Heat transfer and pressure drop were calculated from standard correlations, with fin thickness and tube diameter increasing as a function of frost thickness. The model was further extended to simulate the performance of the heat exchanger under the effect of a fan curve. A comparison is made between DX and indirect refrigeration system performance with respect to capacity, pressure drop and air flow variations under frosting conditions.Air Conditioning and Refrigeration Project 10

Vitamin B12 and folic acid deficiency presenting as acute febrile illness: a case report

Megaloblastic anemia is not uncommon in India, but data is insufficient regarding its presentation as pyrexia. We report the case of a patient who presented with pyrexia and anaemia, which after exclusion of infective, inflammatory or endocrine causes was attributed to megaloblastic anaemia secondary to vitamin B12 and folic acid deficiency. The patient’s fever responded to treatment of vitamin B12 and folic acid deficiency

Large-Eddy Simulations of Magnetohydrodynamic Turbulence in Heliophysics and Astrophysics

We live in an age in which high-performance computing is transforming the way we do science. Previously intractable problems are now becoming accessible by means of increasingly realistic numerical simulations. One of the most enduring and most challenging of these problems is turbulence. Yet, despite these advances, the extreme parameter regimes encountered in space physics and astrophysics (as in atmospheric and oceanic physics) still preclude direct numerical simulation. Numerical models must take a Large Eddy Simulation (LES) approach, explicitly computing only a fraction of the active dynamical scales. The success of such an approach hinges on how well the model can represent the subgrid-scales (SGS) that are not explicitly resolved. In addition to the parameter regime, heliophysical and astrophysical applications must also face an equally daunting challenge: magnetism. The presence of magnetic fields in a turbulent, electrically conducting fluid flow can dramatically alter the coupling between large and small scales, with potentially profound implications for LES/SGS modeling. In this review article, we summarize the state of the art in LES modeling of turbulent magnetohydrodynamic (MHD) ows. After discussing the nature of MHD turbulence and the small-scale processes that give rise to energy dissipation, plasma heating, and magnetic reconnection, we consider how these processes may best be captured within an LES/SGS framework. We then consider several special applications in heliophysics and astrophysics, assessing triumphs, challenges,and future directions

Anemia prevalence in women of reproductive age in low- and middle-income countries between 2000 and 2018

Anemia is a globally widespread condition in women and is associated with reduced economic productivity and increased mortality worldwide. Here we map annual 2000–2018 geospatial estimates of anemia prevalence in women of reproductive age (15–49 years) across 82 low- and middle-income countries (LMICs), stratify anemia by severity and aggregate results to policy-relevant administrative and national levels. Additionally, we provide subnational disparity analyses to provide a comprehensive overview of anemia prevalence inequalities within these countries and predict progress toward the World Health Organization’s Global Nutrition Target (WHO GNT) to reduce anemia by half by 2030. Our results demonstrate widespread moderate improvements in overall anemia prevalence but identify only three LMICs with a high probability of achieving the WHO GNT by 2030 at a national scale, and no LMIC is expected to achieve the target in all their subnational administrative units. Our maps show where large within-country disparities occur, as well as areas likely to fall short of the WHO GNT, offering precision public health tools so that adequate resource allocation and subsequent interventions can be targeted to the most vulnerable populations.Peer reviewe

Design Tool for Display Case Heat Exchanger Frosting and Defrosting

A simulation model for predicting the performance of a display case under frosting conditions has been developed. An experimentally validated heat exchanger simulation model for a secondary refrigerant was extended to simulate operation in open display cases, modeling the varying frost properties and operating conditions and their effect on heat exchanger performance. A separate model based on a few simplifying assumptions has been developed to simulate the defrosting, predict the time required to melt the frost mass (existing at the end of frosting cycle) and compressor and fan power requirements for an entire day operation of a display case. Two design strategies for reducing defrost frequency and overall energy consumption of open supermarket display cases were evaluated relative to the baseline (variable air flow as a consequence of fan characteristics) operation: constant air flow operation; and fin staging. A preliminary analysis of a flat-tube-plain-fin heat exchanger with discontinuous fins was also conducted A simple comparison of heat transfer performance at dry surface conditions shows that all the designs considered are better than an existing display case round-tube-plain-fin heat exchanger.Air Conditioning and Refrigeration Project 11