136 research outputs found

    Multilevel spectral coarsening for graph Laplacian problems with application to reservoir simulation

    Get PDF
    We extend previously developed two-level coarsening procedures for graph Laplacian problems written in a mixed saddle point form to the fully recursive multilevel case. The resulting hierarchy of discretizations gives rise to a hierarchy of upscaled models, in the sense that they provide approximation in the natural norms (in the mixed setting). This property enables us to utilize them in three applications: (i) as an accurate reduced model, (ii) as a tool in multilevel Monte Carlo simulations (in application to finite volume discretizations), and (iii) for providing a sequence of nonlinear operators in FAS (full approximation scheme) for solving nonlinear pressure equations discretized by the conservative two-point flux approximation. We illustrate the potential of the proposed multilevel technique in all three applications on a number of popular benchmark problems used in reservoir simulation

    The Relationship between Therapeutic Alliance and Service User Satisfaction in Mental Health Inpatient Wards and Crisis House Alternatives: A Cross-Sectional Study

    Get PDF
    Background Poor service user experiences are often reported on mental health inpatient wards. Crisis houses are an alternative, but evidence is limited. This paper investigates therapeutic alliances in acute wards and crisis houses, exploring how far stronger therapeutic alliance may underlie greater client satisfaction in crisis houses. Methods and Findings Mixed methods were used. In the quantitative component, 108 crisis house and 247 acute ward service users responded to measures of satisfaction, therapeutic relationships, informal peer support, recovery and negative events experienced during the admission. Linear regressions were conducted to estimate the association between service setting and measures, and to model the factors associated with satisfaction. Qualitative interviews exploring therapeutic alliances were conducted with service users and staff in each setting and analysed thematically. Results We found that therapeutic alliances, service user satisfaction and informal peer support were greater in crisis houses than on acute wards, whilst self-rated recovery and numbers of negative events were lower. Adjusted multivariable analyses suggest that therapeutic relationships, informal peer support and negative experiences related to staff may be important factors in accounting for greater satisfaction in crisis houses. Qualitative results suggest factors that influence therapeutic alliances include service user perceptions of basic human qualities such as kindness and empathy in staff and, at service level, the extent of loss of liberty and autonomy. Conclusions and Implications We found that service users experience better therapeutic relationships and higher satisfaction in crisis houses compared to acute wards, although we cannot exclude the possibility that differences in service user characteristics contribute to this. This finding provides some support for the expansion of crisis house provision. Further research is needed to investigate why acute ward service users experience a lack of compassion and humanity from ward staff and how this could be changed

    School-based curriculum development in Scotland: Curriculum policy and enactment

    Get PDF
    Recent worldwide trends in curriculum policy have re-emphasised the role of teachers in school-based curriculum development. Scotland’s Curriculum for Excellence is typical of these trends, stressing that teachers are agents of change. This paper draws upon empirical data to explore school-based curriculum development in response to Curriculum for Excellence. We focus on two case studies – secondary schools within a single Scottish local education authority. In the paper we argue that the nature and extent of innovation in schools is dependent upon teachers being able to make sense of often complex and confusing curriculum policy, including the articulation of a clear vision about what such policy means for education within each school

    Determinants of Physical Health Self-Management Behaviours in Adults With Serious Mental Illness:A Systematic Review

    Get PDF
    Behavioural interventions can support the adoption of healthier lifestyles and improve physical health outcomes, but it is unclear what factors might drive success of such interventions in people with serious mental illness (SMI). We systematically identified and reviewed evidence of the association between determinants of physical health self-management behaviours in adults with SMI. Data about American Association of Diabetes Educator’s Self-Care Behaviours (AADE-7) were mapped against the novel Mechanisms of Action (MoA) framework. Twenty-eight studies were included in the review, reporting evidence on 104 determinant-behaviour links. Beliefs about capabilities and beliefs about consequences were the most important determinants of behaviour, especially for being physically active and healthy eating. There was some evidence that emotion and environmental context and resources played a role in determining reducing risks, being active, and taking medications. We found very limited evidence associated with problem solving, and no study assessed links between MoAs and healthy coping. Although the review predominantly identified evidence about associations from cross-sectional studies that lacked validated and objective measures of self-management behaviours, these findings can facilitate the identification of behaviour change techniques with hypothesised links to determinants to support self-management in people with SMI

    The state of the Martian climate

    Get PDF
    60°N was +2.0°C, relative to the 1981–2010 average value (Fig. 5.1). This marks a new high for the record. The average annual surface air temperature (SAT) anomaly for 2016 for land stations north of starting in 1900, and is a significant increase over the previous highest value of +1.2°C, which was observed in 2007, 2011, and 2015. Average global annual temperatures also showed record values in 2015 and 2016. Currently, the Arctic is warming at more than twice the rate of lower latitudes

    Effect of Torrefaction on Water Vapor Adsorption Properties and Resistance to Microbial Degradation of Corn Stover

    Get PDF
    The equilibrium moisture content (EMC) of biomass affects transportation, storage, downstream feedstock processing, and the overall economy of biorenewables production. Torrefaction is a thermochemical process conducted in the temperature regime between 200 and 300 °C under an inert atmosphere that, among other benefits, aims to reduce the innate hydrophilicity and susceptibility to microbial degradation of biomass. The objective of this study was to examine water sorption properties of torrefied corn stover. The EMC of raw corn stover, along with corn stover thermally pretreated at three temperatures, was measured using the static gravimetric method at equilibrium relative humidity (ERH) and temperatures ranging from 10 to 98% and from 10 to 40 °C, respectively. Five isotherms were fitted to the experimental data to obtain the prediction equation that best describes the relationship between the ERH and the EMC of lignocellulosic biomass. Microbial degradation of the samples was tested at 97% ERH and 30 °C. Fiber analyses were conducted on all samples. In general, torrefied biomass showed an EMC lower than that of raw biomass, which implied an increase in hydrophobicity. The modified Oswin model performed best in describing the correlation between ERH and EMC. Corn stover torrefied at 250 and 300 °C had negligible dry matter mass loss due to microbial degradation. Fiber analysis showed a significant decrease in hemicellulose content with the increase in pretreatment temperature, which might be the reason for the hydrophobic nature of the torrefied biomass. The outcomes of this work can be used for torrefaction process optimization, and decision-making regarding raw and torrefied biomass storage and downstream processing

    In situ estimation of ice crystal properties at the South Pole using LED calibration data from the IceCube Neutrino Observatory

    Get PDF
    The IceCube Neutrino Observatory instruments about 1 km3 of deep, glacial ice at the geographic South Pole. It uses 5160 photomultipliers to detect Cherenkov light emitted by charged relativistic particles. An unexpected light propagation effect observed by the experiment is an anisotropic attenuation, which is aligned with the local flow direction of the ice. We examine birefringent light propagation through the polycrystalline ice microstructure as a possible explanation for this effect. The predictions of a first-principles model developed for this purpose, in particular curved light trajectories resulting from asymmetric diffusion, provide a qualitatively good match to the main features of the data. This in turn allows us to deduce ice crystal properties. Since the wavelength of the detected light is short compared to the crystal size, these crystal properties include not only the crystal orientation fabric, but also the average crystal size and shape, as a function of depth. By adding small empirical corrections to this first-principles model, a quantitatively accurate description of the optical properties of the IceCube glacial ice is obtained. In this paper, we present the experimental signature of ice optical anisotropy observed in IceCube light-emitting diode (LED) calibration data, the theory and parameterization of the birefringence effect, the fitting procedures of these parameterizations to experimental data, and the inferred crystal properties.Peer Reviewe

    In-situ estimation of ice crystal properties at the South Pole using LED calibration data from the IceCube Neutrino Observatory

    Get PDF
    The IceCube Neutrino Observatory instruments about 1 km3 of deep, glacial ice at the geographic South Pole using 5160 photomultipliers to detect Cherenkov light emitted by charged relativistic particles. A unexpected light propagation effect observed by the experiment is an anisotropic attenuation, which is aligned with the local flow direction of the ice. Birefringent light propagation has been examined as a possible explanation for this effect. The predictions of a first-principles birefringence model developed for this purpose, in particular curved light trajectories resulting from asymmetric diffusion, provide a qualitatively good match to the main features of the data. This in turn allows us to deduce ice crystal properties. Since the wavelength of the detected light is short compared to the crystal size, these crystal properties do not only include the crystal orientation fabric, but also the average crystal size and shape, as a function of depth. By adding small empirical corrections to this first-principles model, a quantitatively accurate description of the optical properties of the IceCube glacial ice is obtained. In this paper, we present the experimental signature of ice optical anisotropy observed in IceCube LED calibration data, the theory and parametrization of the birefringence effect, the fitting procedures of these parameterizations to experimental data as well as the inferred crystal properties.</p

    Mechanical design of the optical modules intended for IceCube-Gen2

    Get PDF
    IceCube-Gen2 is an expansion of the IceCube neutrino observatory at the South Pole that aims to increase the sensitivity to high-energy neutrinos by an order of magnitude. To this end, about 10,000 new optical modules will be installed, instrumenting a fiducial volume of about 8 km3. Two newly developed optical module types increase IceCube’s current sensitivity per module by a factor of three by integrating 16 and 18 newly developed four-inch PMTs in specially designed 12.5-inch diameter pressure vessels. Both designs use conical silicone gel pads to optically couple the PMTs to the pressure vessel to increase photon collection efficiency. The outside portion of gel pads are pre-cast onto each PMT prior to integration, while the interiors are filled and cast after the PMT assemblies are installed in the pressure vessel via a pushing mechanism. This paper presents both the mechanical design, as well as the performance of prototype modules at high pressure (70 MPa) and low temperature (−40∘C), characteristic of the environment inside the South Pole ice
    corecore