Oil palm leaf fibre and its suitability for paper-based products

Due to the shortage of wood as origin materials for paper-based production, agro-residue materials have been explored in the quest of finding the best alternative fibre. Oil palm leaf (OPL) is one of agro-residue that has potential due to its comparable characteristics with wood fibre. Studies on chemical compositions, fibre morphology, and mechanical property of OPL have been carried out aiming to evaluate its potential as a substitute raw material for pulp and paper-based production. The chemical compositions were analysed according to the TAPPI standard, Kurscher-Hoffner and chlorite methods accordingly. The mechanical property (tensile, tearing and bursting strengths) were determined as described in TAPPI test methods. Fibre dimensions were determined using Franklin method and analysed under the optical microscope. The content of cellulose in the OPL is determined to be 43.8%. Although, this result is lower than wood fibre (53%), OPL has higher hemicellulose content (36.4%) than the wood fibre (27.5%). In addition, the lignin content (19.7%) of OPL is in the low range of those in wood resources (18 - 25%). These parameters are important components to produce good quality pulp and will provide high mechanical strength of the paper-based products. The measured fibre length of oil palm leaf (1.13 mm) is shorter than the wood fibre (1.90 mm). Meanwhile, the mechanical property of OPL showed lower indexes than wood resources, however, tear (1.80 mN.m2/g) and burst (0.95 kPa.m2/g) indexes of OPL are higher than other published and successful wood resources (Eucalyptus). Based on the analyses, the oil palm leaf is indeed a suitable alternative of raw material for pulp and paper-based industries

Purification and characterization of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. G1

A cyclodextrin glucanotransferase (CGTase) was successively purified by ammonium sulphate precipitation, and affinity chromatography on a-CD (epoxy)-Sepharose 6B column. The specific activity of the CGTase was increased approximately 2200-fold, from 8.43 U/mg protein to 18,866 U/mg protein. SDS-PAGE showed that the purified CGTase was homogeneous and the molecular weight of the purified CGTase was about 75 kDa. The molecular weight of the enzyme that was estimated by gel filtration under native condition was 79 kDa. This has indicated that Bacillus sp. G1 CGTase is a monomeric protein. The isoelectric point (pI) of the enzyme was about 8.8. Characterization of the enzyme exhibited optimum pH and temperature of 6.0 and 60 8C, respectively. The enzyme was stable from pH 7.0 to 9.0 and retained its high activity up to 60 8C. However, in the presence of 20 mM Ca2+, the purified CGTase is able to prolong its thermal stability up to 70 8C. CGTase was strongly inhibited by ZnSO4, CuSO4, CoCl2, FeSO4, FeCl3 and EDTA. Km and Vmax for the purified enzyme were 0.15 mg/ml and 60.39 mg bcyclodextrin/( ml min), respectively, with soluble starch as substrate. In cyclodextrin production, tapioca starch was found to be the best substrate used to produce CDs. The enzyme produced g- and b-CD in the ratio of 0.11:0.89 after 24 h incubation at 60 8C, without the presence of any selective agents

Morphological characteristics of black aspergilli isolated from clinical wastes

The present study aimed to recognize the microscopic characteristics of black aspergilli species which exhibit similar characteristics on culture media. Forty eight black aspergilli isolates were obtained from clinical wastes and purified using single spore technique on six different culture media. The ultrastructure of fungal conidiophore and spores was detected by using Scanning Electron Microscope (SEM). The fungal isolates were identified within five species included A. niger, A. tubingensis, Aspergillus section Nigri, A. violaceofuscus, A. neoniger. Besides, two isolates identified as Aspergillus sp. strain no. 39, Aspergillus sp. strain no. 53 appear as new strains based on the structure of conidiophore and spores. The fungi species have similar culture characteristics. However, SEM observation demonstrated that they have quite different conidiophore and spores morphology. The study revealed that the microstructure of the fungal spores and conidiophores plays an important role in the identification of fungi species based on the phenotypic method

Development of an Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the Se-MCM-41 Mesoporous Composite

A new bioenzymatic glucose biosensor for selective and sensitive detection of glucose was developed by the immobilization of glucose oxidase (GOD) onto selenium nanoparticle-mesoporous silica composite (MCM-41) matrix and then prepared as a carbon paste electrode (CPE). Cyclic voltammetry was employed to probe the catalytic behavior of the biosensor. A linear calibration plot is obtained over a wide concentration range of glucose from 1 × 10-5 to 2 × 10-3 M. Under optimal conditions, the biosensor exhibits high sensitivity (0.34 μA·mM-1), low detection limit (1 × 10-4 M), high affinity to glucose (Km = 0.02 mM), and also good reproducibility (R.S.D. 2.8%, n=10) and a stability of about ten days when stored dry at +4°C. Besides, the effects of pH value, scan rate, mediator effects on the glucose current, and electroactive interference of the biosensor were also discussed. As a result, the biosensor exhibited an excellent electrocatalytic response to glucose as well as unique stability and reproducibility

Performance Analysis Of Neural Network Model For Automated Visual Inspection With Robotic Arm Controller System

The concept of Automated Visual Inspection (AVI) have emerged as a powerful platform for industrial machine vision where it used to inspect a large number of products rapidly.However,a major problem with this kind of application is the quality produced by the recognition process.In this paper,a system with the capability of identifying and categorizing a product based on image processing has been implemented.The image was processed by using Radial Basis Function (RBF) based on output center and spread values optimization.Robotic arm controller developed for pick and place the product based on their categories.Two performance measures are used to validate the model classification range and the spread values.The results of this project indicate that the model used able to identify the product and classify it according to their shape

A multi-stakeholder strategy to identify conservation priorities in Peninsular Malaysia

Malaysia, with its rapidly growing economy, exemplifies the tensions between conservation and development faced by many tropical nations. Here we present the results of a multi-stakeholder engagement exercise conducted to (1) define conservation priorities in Peninsular Malaysia and (2) explore differences in perceptions among and within stakeholder groups (i.e. government, academia, NGOs and the private sector). Our data collection involved two workshops and two online surveys where participants identified seven general conservation themes and ranked the top five priority issues within each theme. The themes were: (1) policy and management, (2) legislation and enforcement, (3) finance and resource allocation, (4) knowledge, research and development, (5) socio-economic issues, (6) public awareness and participation and (7) rights of nature. In spite of their very different backgrounds and agendas, the four stakeholder groups showed general agreement in their priority preferences except for two issues. Respondents from government and private sector differed the most from each other in their priority choices while academia and NGO showed the highest degree of similarity. This ranked list of 35 conservation priorities is expected to influence the work of policy-makers and others in Peninsular Malaysia and can be used as a model to identify conservation priorities elsewhere

The impact of surgical delay on resectability of colorectal cancer: An international prospective cohort study

AIM: The SARS-CoV-2 pandemic has provided a unique opportunity to explore the impact of surgical delays on cancer resectability. This study aimed to compare resectability for colorectal cancer patients undergoing delayed versus non-delayed surgery. METHODS: This was an international prospective cohort study of consecutive colorectal cancer patients with a decision for curative surgery (January-April 2020). Surgical delay was defined as an operation taking place more than 4 weeks after treatment decision, in a patient who did not receive neoadjuvant therapy. A subgroup analysis explored the effects of delay in elective patients only. The impact of longer delays was explored in a sensitivity analysis. The primary outcome was complete resection, defined as curative resection with an R0 margin. RESULTS: Overall, 5453 patients from 304 hospitals in 47 countries were included, of whom 6.6% (358/5453) did not receive their planned operation. Of the 4304 operated patients without neoadjuvant therapy, 40.5% (1744/4304) were delayed beyond 4 weeks. Delayed patients were more likely to be older, men, more comorbid, have higher body mass index and have rectal cancer and early stage disease. Delayed patients had higher unadjusted rates of complete resection (93.7% vs. 91.9%, P = 0.032) and lower rates of emergency surgery (4.5% vs. 22.5%, P < 0.001). After adjustment, delay was not associated with a lower rate of complete resection (OR 1.18, 95% CI 0.90-1.55, P = 0.224), which was consistent in elective patients only (OR 0.94, 95% CI 0.69-1.27, P = 0.672). Longer delays were not associated with poorer outcomes. CONCLUSION: One in 15 colorectal cancer patients did not receive their planned operation during the first wave of COVID-19. Surgical delay did not appear to compromise resectability, raising the hypothesis that any reduction in long-term survival attributable to delays is likely to be due to micro-metastatic disease

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London