Overcoming Metabolic Burden in Synthetic Biology: a CRISPR interference approach

Synthetic Biology is gaining an increasingly important role in the scientific community and dedicated research centers are rising all over the world. This discipline introduced the engineering principles of abstraction, modularity and standardization in the biology world; the application of these principles is allowing the design of complex biological systems to program living cells, realizing all sorts of desired function in many fields. These systems consist of DNA sequences, rationally combined to program the genetic instructions for cell behavior customization. Each part should behave as a biological brick for the design of complex genetic programs through functional building blocks; each module undergoes an extensive characterization to provide documentation on its functioning, enabling the rational design of complex circuits. Mathematical modeling accompanies all the design procedure as a tool to describe the behavior of each single genetic module, in a bottom-up fashion that should allow the prediction of more complex systems obtained by the interconnection of pre-characterized parts. However, many unpredictability sources hamper the ideally rational design of those synthetic genetic devices, mainly due to the tangled context-dependency behavior of those parts once placed into an intrinsically complex biological living system. Among others, the finite amount of translational resources in prokaryotic cells leads to an effect called metabolic burden, as a result of which hidden interactions between protein synthesis rates arise, leading to unexpected counterintuitive behaviors. To face this issue, two actions have been proposed in this study: firstly, a recently proposed mathematical modeling solution that included a description of the metabolic load exerted by the expression of recombinant genes have been applied on a case study, highlighting its worth of use and working boundaries; second, a CRISPR interference-based architecture have been developed to be used as an alternative to high resource usage transcriptional protein regulators, studying the underlying mechanism in several circuital configurations and optimizing each forming part in order to achieve the desired specifications. In Chapter 1, an introduction on synthetic biology is presented; in the second part, a brief overview on CRISPR technology and the overall aim of the study are reported. In Chapter 2, a case study evaluating the use of mathematical modeling to properly include metabolic burden in rational design of a set of transcriptional regulator cascades is reported. Firstly, the circuits and expected behavior are introduced, along with the discussion about experimental data, dissenting from what initially predicted. Secondly, the comparison between the use of a classical Hill equation-based model and an improved version that explicitly consider the translational load exerted by the expression of recombinant genes is reported. In Chapter 3, the design and deep characterization of a BioBrick$^{TM}$-compatible CRISPR interference-based repression set of modules is shown; expression optimization of the molecular players is reported and its usability as a low-burden alternative is demonstrated with experimental data and mathematical modeling. Working boundaries, peculiar aspects and rooms for improvements are then highlighted. In Chapter 4, preliminary studies aimed to improve the CRISPR interference system are reported and some of its context-dependencies are highlighted. Effects on repression efficiency due to alteration in the sequence of the RNA molecules addressing the CRISPR machinery to the desired target are discussed; evaluation of problems and opportunities related to the expression of more of this RNA guides are then highlighted. Lastly, an example of behavior of the system in presence of a competitor transcriptional regulator is reported. In Chapter 5 the overall conclusions of this thesis work are drawn

Quali strumenti giuridici statali e regionali per le comunit\ue0 patrimoniali?

The Framework Convention on the Value of Cultural Heritage for Society (Faro Convention, 2005) recognizes a central role to heritage communities in the process of identification, study, interpretation, protection, conservation and presentation of the cultural heritage. As a signatory State of the Convention (signed on 27th February 2013, still waiting for ratification), Italy has in any case to ensure its contribution to the safeguarding of the tangible and intangible cultural heritage by adequate policies. Currently, a State law providing a general regulation of the participation of civil society to the protection and the enhancement of cultural heritage in the Italian legal system has not been adopted yet. Nevertheless, communities, groups and individuals have a wide range of instruments available, which can be drawn by an accurate interpretation of the Constitution and of many State and regional laws. In the long run, the persistent lack of common rules on this subject may be a source of uncertainty, capable of weakening, instead of strengthening, the role of heritage communities, in contrast with the principles of the Faro Convention

Citizens of Europe

Il titolo della collana esprime la volont\ue0 di approfondire i profili legati al processo di integrazione europeo, non ignorandone i risvolti pi\uf9 discutibili e burocratici ma sapendo guardare al di l\ue0 di essi, nella logica che traspare dal gioco di assonanze indicato dal titolo. In questo terzo volume Citizens of Europe, dedicato ai temi delle identit\ue0 e della cittadinanza culturale, viene in rilievo la tensione tra i limiti delle politiche, culturali e di cittadinanza, perseguite dalla UE e l\u2019imporsi progressivo \u2013 malgrado le cupe ombre proiettate dalla drammatica attualit\ue0 \u2013 di una pi\uf9 ampia nozione di \u2018cittadinanza d\u2019Europa\u2019, scandita in particolare da quei recenti strumenti giuridici del Consiglio d\u2019Europa attraverso i quali l\u2019afflato europeo, non imprigionato nelle pastoie dei meccanismi della EU citizenship, si sviluppa pi\uf9 significativamente

The Italian Draft Law on the \u2018Provisions Concerning the Safeguarding of the Intangible Cultural Heritage\u2019

Intangible cultural heritage in Italy is still in need of a unified approach, capable of providing reliable criteria for identifying its assets and for indicating timescales and means by which they should be safeguarded. In the continued absence of up-to-date, ad hoc state legislation (since the content of those laws which do implement international Conventions is too generic in nature to be sufficiently effective), the Regions have proceeded to act in a somewhat scattered manner, giving rise to an extremely fragmented and very disorderly regulatory framework. The draft law N. 4486, "Provisions Concerning the Safeguarding of the Intangible Cultural Heritage", presented on 12th May 2017 at the Chamber of Deputies of the Italian Republic - as the result of the work of an interdisciplinary and inter-university research team coordinated by Marco Giampieretti, who has drafted the final text with the collaboration of Simona Pinton - seeks to fill the serious void that exists in Italian legal system by aligning it to the principles of international and European law, by redirecting the relevant State and Regional legislation, and by satisfying the fundamental requirements of the national community

Implementation and performances of the IPbus protocol for the JUNO Large-PMT readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the experiment is an unprecedented 3% energy resolution, guaranteed by its large active mass (20 kton) and the use of more than 20,000 20-inch photo-multiplier tubes (PMTs) acquired by high-speed, high-resolution sampling electronics located very close to the PMTs. As the Front-End and Read-Out electronics is expected to continuously run underwater for 30 years, a reliable readout acquisition system capable of handling the timestamped data stream coming from the Large-PMTs and permitting to simultaneously monitor and operate remotely the inaccessible electronics had to be developed. In this contribution, the firmware and hardware implementation of the IPbus based readout protocol will be presented, together with the performances measured on final modules during the mass production of the electronics

Mass testing of the JUNO experiment 20-inch PMTs readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test protocol for the 20-inch PMT underwater readout electronics, performed in parallel to the mass production line. In a time period of about ten months, a total number of 6950 electronic boards were tested with an acceptance yield of 99.1%

Validation and integration tests of the JUNO 20-inch PMTs readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet specific tight requirements, and a thorough characterization is required. The present paper describes the tests performed on the readout modules to measure their performances.Comment: 20 pages, 13 figure

Infected pancreatic necrosis: outcomes and clinical predictors of mortality. A post hoc analysis of the MANCTRA-1 international study

: The identification of high-risk patients in the early stages of infected pancreatic necrosis (IPN) is critical, because it could help the clinicians to adopt more effective management strategies. We conducted a post hoc analysis of the MANCTRA-1 international study to assess the association between clinical risk factors and mortality among adult patients with IPN. Univariable and multivariable logistic regression models were used to identify prognostic factors of mortality. We identified 247 consecutive patients with IPN hospitalised between January 2019 and December 2020. History of uncontrolled arterial hypertension (p = 0.032; 95% CI 1.135-15.882; aOR 4.245), qSOFA (p = 0.005; 95% CI 1.359-5.879; aOR 2.828), renal failure (p = 0.022; 95% CI 1.138-5.442; aOR 2.489), and haemodynamic failure (p = 0.018; 95% CI 1.184-5.978; aOR 2.661), were identified as independent predictors of mortality in IPN patients. Cholangitis (p = 0.003; 95% CI 1.598-9.930; aOR 3.983), abdominal compartment syndrome (p = 0.032; 95% CI 1.090-6.967; aOR 2.735), and gastrointestinal/intra-abdominal bleeding (p = 0.009; 95% CI 1.286-5.712; aOR 2.710) were independently associated with the risk of mortality. Upfront open surgical necrosectomy was strongly associated with the risk of mortality (p < 0.001; 95% CI 1.912-7.442; aOR 3.772), whereas endoscopic drainage of pancreatic necrosis (p = 0.018; 95% CI 0.138-0.834; aOR 0.339) and enteral nutrition (p = 0.003; 95% CI 0.143-0.716; aOR 0.320) were found as protective factors. Organ failure, acute cholangitis, and upfront open surgical necrosectomy were the most significant predictors of mortality. Our study confirmed that, even in a subgroup of particularly ill patients such as those with IPN, upfront open surgery should be avoided as much as possible. Study protocol registered in ClinicalTrials.Gov (I.D. Number NCT04747990)

How future surgery will benefit from SARS-COV-2-related measures: a SPIGC survey conveying the perspective of Italian surgeons

COVID-19 negatively affected surgical activity, but the potential benefits resulting from adopted measures remain unclear. The aim of this study was to evaluate the change in surgical activity and potential benefit from COVID-19 measures in perspective of Italian surgeons on behalf of SPIGC. A nationwide online survey on surgical practice before, during, and after COVID-19 pandemic was conducted in March-April 2022 (NCT:05323851). Effects of COVID-19 hospital-related measures on surgical patients' management and personal professional development across surgical specialties were explored. Data on demographics, pre-operative/peri-operative/post-operative management, and professional development were collected. Outcomes were matched with the corresponding volume. Four hundred and seventy-three respondents were included in final analysis across 14 surgical specialties. Since SARS-CoV-2 pandemic, application of telematic consultations (4.1% vs. 21.6%; p < 0.0001) and diagnostic evaluations (16.4% vs. 42.2%; p < 0.0001) increased. Elective surgical activities significantly reduced and surgeons opted more frequently for conservative management with a possible indication for elective (26.3% vs. 35.7%; p < 0.0001) or urgent (20.4% vs. 38.5%; p < 0.0001) surgery. All new COVID-related measures are perceived to be maintained in the future. Surgeons' personal education online increased from 12.6% (pre-COVID) to 86.6% (post-COVID; p < 0.0001). Online educational activities are considered a beneficial effect from COVID pandemic (56.4%). COVID-19 had a great impact on surgical specialties, with significant reduction of operation volume. However, some forced changes turned out to be benefits. Isolation measures pushed the use of telemedicine and telemetric devices for outpatient practice and favored communication for educational purposes and surgeon-patient/family communication. From the Italian surgeons' perspective, COVID-related measures will continue to influence future surgical clinical practice

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio