136 research outputs found

    Product Development from Veneer-Mill Residues: An Application of the Taguchi's Method

    Get PDF
    The raw material used for decorative (face) veneer manufacturing consists mainly of hardwood logs, the highest in quality harvested for industrial purposes. Besides the common sawmill residuals, the clipping operation in the process produces quite long, strand-type vestiges, and large end-clipping cutoffs. During the course of the research project presented in this article, structural composite materials were designed and formulated using these clipping residues as principal furnish materials. A robust statistical product development technique, the Taguchi's method, helped to identify the effect of component factors on the expected mechanical properties of these novel products.Results of three-factor/three-level analyses indicated that there is a linear positive correlation between target density and performance attributes (MOE and MOR). Increasing the content of end-clippings up to 25% resulted in decline of strength and stiffness. However, when the ratio was over 1 to 4, this trend proved to be negligible. Resin solid content within the selected range had no significant control over the examined panel properties

    Endoscopic sphincterotomy for delaying choLecystectomy in mild acute biliarY pancreatitis (EMILY study): Protocol of a multicentre randomised clinical trial

    Get PDF
    Introduction: According to the literature, early cholecystectomy is necessary to avoid complications related to gallstones after an initial episode of acute biliary pancreatitis (ABP). A randomised, controlled multicentre trial (the PONCHO trial) revealed that in the case of gallstone-induced pancreatitis, early cholecystectomy was safe in patients with mild gallstone pancreatitis and reduced the risk of recurrent gallstone-related complications, as compared with interval cholecystectomy. We hypothesise that carrying out a sphincterotomy (ES) allows us to delay cholecystectomy, thus making it logistically easier to perform and potentially increasing the efficacy and safety of the procedure. Methods/Design: EMILY is a prospective, randomised, controlled multicentre trial. All patients with mild ABP, who underwent ES during the index admission or in the medical history will be informed to take part in EMILY study. The patients will be randomised into two groups: (1) early cholecystectomy (within 6 days after discharge) and (2) patients with delayed (interval) cholecystectomy (between 45 and 60 days after discharge). During a 12-month period, 93 patients will be enrolled from participating clinics. The primary endpoint is a composite endpoint of mortality and recurrent acute biliary events (that is, recurrent ABP, acute cholecystitis, uncomplicated biliary colic and cholangitis). The secondary endpoints are organ failure, biliary leakage, technical difficulty of the cholecystectomy, surgical and other complications

    Azimuthal anisotropy of charged jet production in root s(NN)=2.76 TeV Pb-Pb collisions

    Get PDF
    We present measurements of the azimuthal dependence of charged jet production in central and semi-central root s(NN) = 2.76 TeV Pb-Pb collisions with respect to the second harmonic event plane, quantified as nu(ch)(2) (jet). Jet finding is performed employing the anti-k(T) algorithm with a resolution parameter R = 0.2 using charged tracks from the ALICE tracking system. The contribution of the azimuthal anisotropy of the underlying event is taken into account event-by-event. The remaining (statistical) region-to-region fluctuations are removed on an ensemble basis by unfolding the jet spectra for different event plane orientations independently. Significant non-zero nu(ch)(2) (jet) is observed in semi-central collisions (30-50% centrality) for 20 <p(T)(ch) (jet) <90 GeV/c. The azimuthal dependence of the charged jet production is similar to the dependence observed for jets comprising both charged and neutral fragments, and compatible with measurements of the nu(2) of single charged particles at high p(T). Good agreement between the data and predictions from JEWEL, an event generator simulating parton shower evolution in the presence of a dense QCD medium, is found in semi-central collisions. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Peer reviewe

    Long-range angular correlations on the near and away side in p&#8211;Pb collisions at

    Get PDF

    Forward-central two-particle correlations in p-Pb collisions at root s(NN)=5.02 TeV

    Get PDF
    Two-particle angular correlations between trigger particles in the forward pseudorapidity range (2.5 2GeV/c. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B. V.Peer reviewe

    Event-shape engineering for inclusive spectra and elliptic flow in Pb-Pb collisions at root(NN)-N-S=2.76 TeV

    Get PDF
    Peer reviewe

    Pseudorapidity and transverse-momentum distributions of charged particles in proton-proton collisions at root s=13 TeV

    Get PDF
    The pseudorapidity (eta) and transverse-momentum (p(T)) distributions of charged particles produced in proton-proton collisions are measured at the centre-of-mass energy root s = 13 TeV. The pseudorapidity distribution in vertical bar eta vertical bar <1.8 is reported for inelastic events and for events with at least one charged particle in vertical bar eta vertical bar <1. The pseudorapidity density of charged particles produced in the pseudorapidity region vertical bar eta vertical bar <0.5 is 5.31 +/- 0.18 and 6.46 +/- 0.19 for the two event classes, respectively. The transverse-momentum distribution of charged particles is measured in the range 0.15 <p(T) <20 GeV/c and vertical bar eta vertical bar <0.8 for events with at least one charged particle in vertical bar eta vertical bar <1. The evolution of the transverse momentum spectra of charged particles is also investigated as a function of event multiplicity. The results are compared with calculations from PYTHIA and EPOS Monte Carlo generators. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Peer reviewe

    Elliptic flow of muons from heavy-flavour hadron decays at forward rapidity in Pb-Pb collisions at root s(NN)=2.76TeV

    Get PDF
    The elliptic flow, v(2), of muons from heavy-flavour hadron decays at forward rapidity (2.5 <y <4) is measured in Pb-Pb collisions at root s(NN)= 2.76TeVwith the ALICE detector at the LHC. The scalar product, two- and four-particle Q cumulants and Lee-Yang zeros methods are used. The dependence of the v(2) of muons from heavy-flavour hadron decays on the collision centrality, in the range 0-40%, and on transverse momentum, p(T), is studied in the interval 3 <p(T)<10 GeV/c. A positive v(2) is observed with the scalar product and two-particle Q cumulants in semi-central collisions (10-20% and 20-40% centrality classes) for the p(T) interval from 3 to about 5GeV/c with a significance larger than 3 sigma, based on the combination of statistical and systematic uncertainties. The v(2) magnitude tends to decrease towards more central collisions and with increasing pT. It becomes compatible with zero in the interval 6 <p(T)<10 GeV/c. The results are compared to models describing the interaction of heavy quarks and open heavy-flavour hadrons with the high-density medium formed in high-energy heavy-ion collisions. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V.Peer reviewe

    Underlying Event measurements in pp collisions at s=0.9 \sqrt {s} = 0.9 and 7 TeV with the ALICE experiment at the LHC

    Full text link
    corecore