A new method to compensate impedance artefacts for Li-ion batteries with integrated micro-reference electrodes

In order to measure the electrochemical characteristics of both electrodes inside Li-ion batteries, micro-reference electrodes (μREF) turned out to be very useful. However, measuring the electrochemical impedance with respect to μREF can lead to severe measurement artefacts, making a detailed analysis of the impedance spectra complicated. In the present work a new method is developed in which high-frequency measurement artefacts can be compensated. A theoretical analysis, using equivalent circuit models of the measurement setups, shows that if two different impedance measurements are averaged, the impedance contributions from the measurement leads can be completely eliminated. The theoretical analysis is validated using Li-ion batteries with seven integrated μREF, having all different impedances. The measurement results show that artefacts are dominating for high-impedance μREF in the high frequency range. However, these artefacts can be fully compensated by averaging two separate impedance measurements, as predicted by theory. This easily makes it possible to perform artefact-free impedance measurements, even at high frequencies

Search for a high-mass Higgs boson decaying to a W boson pair in pp collisions at √s = 8 TeV with the ATLAS detector

A search for a high-mass Higgs boson H is performed in the H → WW → ℓνℓν and H → WW → ℓνqq decay channels using pp collision data corresponding to an integrated luminosity of 20.3 fb−¹ collected at √s = 8 TeV by the ATLAS detector at the Large Hadron Collider. No evidence of a high-mass Higgs boson is found. Limits on σH × BR(H → WW) as a function of the Higgs boson mass mH are determined in three different scenarios: one in which the heavy Higgs boson has a narrow width compared to the experimental resolution, one for a width increasing with the boson mass and modeled by the complex-pole scheme following the same behavior as in the Standard Model, and one for intermediate widths. The upper range of the search is mH = 1500 GeV for the narrow-width scenario and mH = 1000 GeV for the other two scenarios. The lower edge of the search range is 200–300 GeV and depends on the analysis channel and search scenario. For each signal interpretation, individual and combined limits from the two WW decay channels are presented. At mH = 1500 GeV, the highest-mass point tested, σH × BR(H → WW) for a narrow-width Higgs boson is constrained to be less than 22 fb and 6.6 fb at 95% CL for the gluon fusion and vector-boson fusion production modes, respectively

Sensorless battery temperature measurements based on electrochemical impedance spectroscopy

A new method is proposed to measure the internal temperature of (Li-ion) batteries. Based on electrochemical impedance spectroscopy measurements, an intercept frequency (f0) can be determined which is exclusively related to the internal battery temperature. The intercept frequency is defined as the frequency at which the imaginary part of the impedance is zero (Zim = 0), i.e. where the phase shift between the battery current and voltage is absent. The advantage of the proposed method is twofold: (i) no hardware temperature sensors are required anymore to monitor the battery temperature and (ii) the method does not suffer from heat transfer delays. Mathematical analysis of the equivalent electrical-circuit, representing the battery performance, confirms that the intercept frequency decreases with rising temperatures. Impedance measurements on rechargeable Li-ion cells of various chemistries were conducted to verify the proposed method. These experiments reveal that the intercept frequency is clearly dependent on the temperature and does not depend on State-of-Charge (SoC) and aging. These impedance-based sensorless temperature measurements are therefore simple and convenient for application in a wide range of stationary, mobile and high-power devices, such as hybrid- and full electric vehicles

Crosstalk interferences on impedance measurements in battery packs

In order to provide the required power and energy for e.g. automotive applications, a multitude of cells is assembled into a battery pack. For safety and control purposes it is of interest to equip every single cell with an Electrochemical Impedance Spectroscopy (EIS) measurement system. However, performing EIS measurements simultaneously on each cell in a battery pack introduces crosstalk interferences in surrounding cells. This causes EIS measurements in battery packs to be inaccurate. An experimental investigation on a battery pack showed that crosstalk is a linear phenomenon which is dependent on the measurement frequency, the relative position of the cells and the inter-cell spacing. Based on the experimental results and a proposed two-coil model with inductive coupling, a transfer-function description has been developed in order to simulate the crosstalk behavior. This model can be used as a supporting tool in the development of ElS-based measurement systems in battery packs

Review of Underwater and In-Air Sounds Emitted by Australian and Antarctic Marine Mammals

The study of marine soundscapes is a growing field of research. Recording hardware is becoming more accessible; there are a number of off-the-shelf autonomous recorders that can be deployed for months at a time; software analysis tools exist as shareware; rawor preprocessed recordings are freely and publicly available. However, what is missing are catalogues of commonly recorded sounds. Sounds related to geophysical events (e.g. earthquakes) and weather (e.g. wind and precipitation), to human activities (e.g. ships) and to marine animals (e.g. crustaceans, fish and marine mammals) commonly occur. Marine mammals are distributed throughout Australia's oceans and significantly contribute to the underwater soundscape. However, due to a lack of concurrent visual and passive acoustic observations, it is often not known which species produces which sounds. To aid in the analysis of Australian and Antarctic marine soundscape recordings, a literature review of the sounds made by marine mammals was undertaken. Frequency, duration and source level measurements are summarised and tabulated. In addition to the literature review, new marine mammal data are presented and include recordings from Australia of Omura's whales (Balaenoptera omurai), dwarf sperm whales (Kogia sima), common dolphins (Delphinus delphis), short-finned pilot whales (Globicephala macrorhynchus), long-finned pilot whales (G. melas), Fraser's dolphins (Lagenodelphis hosei), false killer whales (Pseudorca crassidens), striped dolphins (Stenella coeruleoalba) and spinner dolphins (S. longirostris), as well as the whistles and burst-pulse sounds of Australian pygmy killer whales (Feresa attenuata). To date, this is the most comprehensive acoustic summary for marine mammal species in Australian waters