281 research outputs found
Correction of Dopant Concentration Fluctuation Effects in Silicon Drift Detectors
Dopant fluctuations in silicon wafers are responsible for systematic errors in the determination of the particle crossing point in silicon drift detectors. In this paper, we report on the first large scale measurement of this effect by means of a particle beam. A significant improvement of the anodic resolution has been obtained by correcting for these systematic deviations
Recent results from beam tests of large area silicon drift detectors
Silicon drift detectors with an active area of 7.0 × 7.5 cm2 will equip the two middle layers of the Inner Tracking System of the ALICE experiment. The performance of several prototypes was studied during beam tests carried out at the CERN SPS facility. The results of the beam test data analysis are discussed in this paper
Recent Developments on the Silicon Drift Detector readout scheme for the ALICE Inner Tracking System
Proposal of abstract for LEB99, Snowmass, Colorado, 20-24 September 1999Recent developments of the Silicon Drift Detector (SDD) readout system for the ALICE Experiment are presented. The foreseen readout system is based on 2 main units. The first unit consists of a low noise preamplifier, an analog memory which continuously samples the amplifier output, an A/D converter and a digital memory. When the trigger signal validates the analog data, the ADCs convert the samples into a digital form and store them into the digital memory. The second unit performs the zero suppression/data compression operations. In this paper the status of the design is presented, together with the test results of the A/D converter, the multi-event buffer and the compression unit prototype.Summary:In the Inner Tracker System (ITS) of the ALICE experiment the third and the fourth layer of the detectors are SDDs. These detectors provide the measurement of both the energy deposition and the bi-dimensional position of the track. In terms of readout an SDD can be viewed as a matrix, where the rows are the detector anodes and the columns are the samples to be read during the drift time; therefore, a very large amount of data has to be amplified, converted in digital form and preprocessed in order to avoid the storage of non-significatn data.Since the electron mobility is a strong temperature function, detector temperature has to be kept constant; on the other hand, it is not possible to use very efficient cooling systems because the amount of material in this area is very limited, so the power budget for the electronic readout is very low (less than 6 mW/anode).The simplest solution would be to send the analog signals outside the sensitive area immediately after a preamplification; unfortunately, the ratio between the number of channels (around 200 000) and the space available is so high that the simple solution of sending all the SDD anodes output outside teh detector zone after a low-noise amplification is not practically manageable.Abstract:The adopted solution is based on three main units:(i) A front-end chip that performs low noise amplification, fast analog storage and A/D conversion(ii) A multi-event digital buffer for data derandomization(iii) A data compression/zero suppression and system control boardThe first two units are distributed on the ladders near the detectors and have stringent power and space requirements, while the third unit is placed at both ends of the ladders and in boxes placed on both ends of the TPC detector.The first unit is the most critical part of the system. It works as follows: the detector signals are continuously amplified, sampled and stored in the analog memory with a frequency of 40 MSamples/s The L0d trigger signal stops the write operation, while the L1 trigger signal starts the conversion phase. This phase will continue until the event data are stored in the event buffer if the L2y confirm trigger signal is received, or rejected if the L2n abort signal will be issued by the trigger system.Prototypes of the three parts have been designed and tested while the full chip is currently under design. Tests of the A/D converter will be presented.The multi-event buffer purpose is to de-randomize the even data in order to reduce the transmission speed. Preliminary tests of the first prototype will be presented.The board placed at the end of the ladders performs various functions. It reduces the amount of data through various cascaded algorithms with variable parameters and transmits the data to the SIU board. It also controls the test and slow control system for the ladder circuitry. Tests of the FPGA-based prototypes will be presented.Special care has been taken for the test problem. The ASICs designed are provided of a test control port based on teh IEEE 1149.1 JTAG standard. The same protocol is used for downloading configuration information
Test Results of the ALICE SDD Electronic Readout Prototypes
The first prototypes of the front-end electronics of the ALICE silicon driftdetectors have been designed and tested. The integrated circuits have been designed using state of the art technologies and, for the analog parts, with radiation-tolerantdesign techniques. In this paper, the test results of the building blocks of the PASCAL chip and the first prototype of the AMBRA chip are presented. The prototypes fully respect the ALICE requirements; owingto the use of deep-submicron technologies together with radiation-tolerant layout techniques, the prototypes have shown a toleranceto a radiation dose much higher than the one foreseen for the ALICE environment.(Abstract only available, full text to follow)
The Silicon Drift Detector readout scheme for the Inner Tracking System of the ALICE Experiment
Presentation at Quark Matter '99, Torino, Italy, 10-15 May 1999The Silicon Drift Detectors (SDDs) provide, through the measurement of the drift time of the charge deposited by the particle which crosses the detector, information on the impact point and on the energy deposition. The foreseen readout scheme is based on a single chip implementation of an integrated circuit that includes low-noise amplification, fast analog strorage and analog to digital conversion, thus avoiding the problems related to the analog signal transmission. A multi-event buffer that reduces the transmission bandwidth and a data compression/zero suppression unit complete the architecture.Abstract:In this paper, the system components design is described, together with the results of the first prototypes
Il Rivelatore a deriva di silicio per l'esperimento ALICE
Un rivelatore a deriva di silicio di grande superficie per l'Inner Tracking System dell'esperimento ALICE è stato progettato, prodotto e provato. La sua peculiarità principale è la capacità di lavorare senza supporti esterni al partitore integrato, grazie anche agli accorgimenti addotati per rinforzarne la stabilità elettrica. Uno dei prototipi è stato provato su un fascio di pioni al CERN fornendo una risoluzione spaziale media dell'ordine dei 30 µm su entrambe le direzioni
Charge separation relative to the reaction plane in Pb-Pb collisions at TeV
Measurements of charge dependent azimuthal correlations with the ALICE
detector at the LHC are reported for Pb-Pb collisions at TeV. Two- and three-particle charge-dependent azimuthal correlations in
the pseudo-rapidity range are presented as a function of the
collision centrality, particle separation in pseudo-rapidity, and transverse
momentum. A clear signal compatible with a charge-dependent separation relative
to the reaction plane is observed, which shows little or no collision energy
dependence when compared to measurements at RHIC energies. This provides a new
insight for understanding the nature of the charge dependent azimuthal
correlations observed at RHIC and LHC energies.Comment: 12 pages, 3 captioned figures, authors from page 2 to 6, published
version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/286
A note on comonotonicity and positivity of the control components of decoupled quadratic FBSDE
In this small note we are concerned with the solution of Forward-Backward
Stochastic Differential Equations (FBSDE) with drivers that grow quadratically
in the control component (quadratic growth FBSDE or qgFBSDE). The main theorem
is a comparison result that allows comparing componentwise the signs of the
control processes of two different qgFBSDE. As a byproduct one obtains
conditions that allow establishing the positivity of the control process.Comment: accepted for publicatio
Multiplicity dependence of jet-like two-particle correlations in p-Pb collisions at = 5.02 TeV
Two-particle angular correlations between unidentified charged trigger and
associated particles are measured by the ALICE detector in p-Pb collisions at a
nucleon-nucleon centre-of-mass energy of 5.02 TeV. The transverse-momentum
range 0.7 5.0 GeV/ is examined,
to include correlations induced by jets originating from low
momen\-tum-transfer scatterings (minijets). The correlations expressed as
associated yield per trigger particle are obtained in the pseudorapidity range
. The near-side long-range pseudorapidity correlations observed in
high-multiplicity p-Pb collisions are subtracted from both near-side
short-range and away-side correlations in order to remove the non-jet-like
components. The yields in the jet-like peaks are found to be invariant with
event multiplicity with the exception of events with low multiplicity. This
invariance is consistent with the particles being produced via the incoherent
fragmentation of multiple parton--parton scatterings, while the yield related
to the previously observed ridge structures is not jet-related. The number of
uncorrelated sources of particle production is found to increase linearly with
multiplicity, suggesting no saturation of the number of multi-parton
interactions even in the highest multiplicity p-Pb collisions. Further, the
number scales in the intermediate multiplicity region with the number of binary
nucleon-nucleon collisions estimated with a Glauber Monte-Carlo simulation.Comment: 23 pages, 6 captioned figures, 1 table, authors from page 17,
published version, figures at
http://aliceinfo.cern.ch/ArtSubmission/node/161
Transverse sphericity of primary charged particles in minimum bias proton-proton collisions at , 2.76 and 7 TeV
Measurements of the sphericity of primary charged particles in minimum bias
proton--proton collisions at , 2.76 and 7 TeV with the ALICE
detector at the LHC are presented. The observable is linearized to be collinear
safe and is measured in the plane perpendicular to the beam direction using
primary charged tracks with GeV/c in . The
mean sphericity as a function of the charged particle multiplicity at
mid-rapidity () is reported for events with different
scales ("soft" and "hard") defined by the transverse momentum of the leading
particle. In addition, the mean charged particle transverse momentum versus
multiplicity is presented for the different event classes, and the sphericity
distributions in bins of multiplicity are presented. The data are compared with
calculations of standard Monte Carlo event generators. The transverse
sphericity is found to grow with multiplicity at all collision energies, with a
steeper rise at low , whereas the event generators show the
opposite tendency. The combined study of the sphericity and the mean with multiplicity indicates that most of the tested event generators
produce events with higher multiplicity by generating more back-to-back jets
resulting in decreased sphericity (and isotropy). The PYTHIA6 generator with
tune PERUGIA-2011 exhibits a noticeable improvement in describing the data,
compared to the other tested generators.Comment: 21 pages, 9 captioned figures, 3 tables, authors from page 16,
published version, figures from
http://aliceinfo.cern.ch/ArtSubmission/node/308
- …