Seawater redox variations during the deposition of the Kimmeridge Clay Formation, United Kingdom (Upper Jurassic): evidence from molybdenum isotopes and trace metal ratios

The Kimmeridge Clay Formation (KCF) and its equivalents worldwide represent one of the most prolonged periods of organic carbon accumulation of the Mesozoic. In this study, we use the molybdenum (Mo) stable isotope system in conjunction with a range of trace metal paleoredox proxies to assess how seawater redox varied both locally and globally during the deposition of the KCF. Facies with lower organic carbon contents (TOC 1–7 wt %) were deposited under mildly reducing (suboxic) conditions, while organic-rich facies (TOC >7 wt %) accumulated under more strongly reducing (anoxic or euxinic) local conditions. Trace metal abundances are closely linked to TOC content, suggesting that the intensity of reducing conditions varied repeatedly during the deposition of the KCF and may have been related to orbitally controlled climate changes. Long-term variations in ?98/95Mo are associated with the formation of organic-rich intervals and are related to third-order fluctuations in relative sea level. Differences in the mean ?98/95Mo composition of the organic-rich intervals suggest that the global distribution of reducing conditions was more extensive during the deposition of the Pectinatites wheatleyensis and lower Pectinatites hudlestoni zones than during the deposition of the upper Pectinatites hudlestoni and Pectinatites pectinatus zones. The global extent of reducing conditions during the Kimmerigidan was greater than today but was less widespread than during the Toarcian (Early Jurassic) oceanic anoxic event. This study also demonstrates that the Mo isotope system in Jurassic seawater responded to changes in redox conditions in a manner consistent with its behavior in present-day sedimentary environment

The Global Boundary Stratotype Section and Point (GSSP) for the base of the Albian Stage, of the Cretaceous, the Col de Pré-Guittard section, Arnayon, Drôme, France

Following the unanimous approval of the Executive Committee on the International Union of Geological Sciences as notified on April 8, 2016, the Global boundary Stratotype Section and Point for the base of the Albian Stage of the Cretaceous is defined at the first occurrence datum of the planktonic foraminiferan Microhedbergella renilaevis Huber and Leckie, 2011 at a level 37.4 meters above the base of the Marnes Bleues Formation and 40 cm above the base of the Niveau Kilian marker bed in the section SSE of the Col de Pré-Guittard, Arnayon, Drôme, France. The first occurrence of Microhedbergella renilaevis is placed within a 100-m section of argillaceous sediments with 28 secondary markers including calcareous nannofossils, planktonic foraminifera, an inoceramid bivalve, ammonites, stable carbon isotopes, and local marker beds

Physico-chemical analysis of Albian (Lower Cretaceous) amber from San Just (Spain) : implications for palaeoenvironmental and palaeoecological studies

Amber from a Lower Cretaceous outcrop at San Just, located in the Eastern Iberian Peninsula (Escucha Formation, Maestrat Basin), was investigated to evaluate its physico-chemical properties. Thermogravimetric (TG) and Differential Thermogravimetric (DTG) analyses, infra-red spectroscopy, elemental and C-isotope analyses were performed. Physico-chemical differences between the internal light nuclei and the peripheral darker portions of San Just amber can be attributed to processes of diagenetic alteration that preferentially took place in the external amber border colonized by microorganisms (fungi or bacteria) when the resin was still liquid or slightly polymerized. δ13Camber values of different pieces of the same sample, from the nucleus to the external part, are remarkably homogeneous, as are δ13Camber values of the darker peripheral portions and lighter inner parts of the same samples. Hence, neither invasive microorganisms, nor diagenetic alteration changed the bulk isotopic composition of the amber. δ13C values of different amber samples range from -21.1‰ to -24‰, as expected for C3 plant-derived material. C-isotope analysis, coupled to palaeobotanical, TG and DTG data and infra-red spectra, suggests that San Just amber was exuded by only one conifer species, belonging to either the Cheirolepidiaceae or Aracauriaceae, coniferous families probably living under stable palaeoenvironmental and palaeoecological conditions

U and Th content in the Central Apennines continental crust: a contribution to the determination of the geo-neutrinos flux at LNGS

The regional contribution to the geo-neutrino signal at Gran Sasso National Laboratory (LNGS) was determined based on a detailed geological, geochemical and geophysical study of the region. U and Th abundances of more than 50 samples representative of the main lithotypes belonging to the Mesozoic and Cenozoic sedimentary cover were analyzed. Sedimentary rocks were grouped into four main "Reservoirs" based on similar paleogeographic conditions and mineralogy. Basement rocks do not outcrop in the area. Thus U and Th in the Upper and Lower Crust of Valsugana and Ivrea-Verbano areas were analyzed. Based on geological and geophysical properties, relative abundances of the various reservoirs were calculated and used to obtain the weighted U and Th abundances for each of the three geological layers (Sedimentary Cover, Upper and Lower Crust). Using the available seismic profile as well as the stratigraphic records from a number of exploration wells, a 3D modelling was developed over an area of 2^{\circ}x2^{\circ} down to the Moho depth, for a total volume of about 1.2x10^6 km^3. This model allowed us to determine the volume of the various geological layers and eventually integrate the Th and U contents of the whole crust beneath LNGS. On this base the local contribution to the geo-neutrino flux (S) was calculated and added to the contribution given by the rest of the world, yielding a Refined Reference Model prediction for the geo-neutrino signal in the Borexino detector at LNGS: S(U) = (28.7 \pm 3.9) TNU and S(Th) = (7.5 \pm 1.0) TNU. An excess over the total flux of about 4 TNU was previously obtained by Mantovani et al. (2004) who calculated, based on general worldwide assumptions, a signal of 40.5 TNU. The considerable thickness of the sedimentary rocks, almost predominantly represented by U- and Th- poor carbonatic rocks in the area near LNGS, is responsible for this difference.Comment: 45 pages, 5 figures, 12 tables; accepted for publication in GC

A Southern Hemisphere record of global trace-metal drawdown and orbital modulation of organic-matter burial across the Cenomanian–Turonian boundary (Ocean Drilling Program Site 1138, Kerguelen Plateau)

Despite its assumed global nature, there are very few detailed stratigraphic records of the late Cenomanian to the early Turonian Oceanic Anoxic Event 2 from the Southern Hemisphere. A highly resolved record of environmental changes across the Cenomanian\u2013Turonian boundary interval is presented from Ocean Drilling Program Site 1138 on the central Kerguelen Plateau (southern Indian Ocean). The new data lead to three key observations. Firstly, detailed biostratigraphy and chemostratigraphy indicate that the record of Oceanic Anoxic Event 2 is not complete, with a hiatus spanning the onset of the event. A decrease in glauconite and highly weathered clays after the onset of Oceanic Anoxic Event 2 marks the end of the hiatus interval, which can be explained by a relative sea-level rise that increased sediment accommodation space on the Kerguelen Plateau margin. This change in depositional environment controlled the timing of the delayed peak in organic-matter burial during Oceanic Anoxic Event 2 at Site 1138 compared with other Oceanic Anoxic Event 2 locations worldwide. A second key observation is the presence of cyclic fluctuations in the quantity and composition of organic matter being buried on the central Kerguelen Plateau throughout the latter stages of Oceanic Anoxic Event 2 and the early Turonian. A close correspondence between organic matter, sedimentary elemental compositions and sediments recording sea-floor oxygenation suggests that the cycles were mainly productivity-driven phenomena. Available age-control points constrain the periodicity of the coupled changes in sedimentary parameters to ca 20 to 70 ka, suggesting a link between carbon burial and astronomically forced climatic variations (precession or obliquity) in the Southern Hemisphere mid-latitudes both during, and after, Oceanic Anoxic Event 2: fluctuations that were superimposed on the impact of global-scale processes. Finally, trace-metal data from the black-shale unit at Site 1138 provide the first evidence from outside of the proto-North Atlantic region for a global drawdown of seawater trace-metal (Mo) inventories during Oceanic Anoxic Event 2

Early Jurassic North Atlantic sea-surface temperatures from TEX86 palaeothermometry

Early Jurassic marine palaeotemperatures have been typically quantified by oxygen-isotope palaeothermometry of benthic and nektonic carbonate and phosphatic macrofossils. However, records of Early Jurassic sea-surface temperatures (SSTs) that can be directly compared with General Circulation Model (GCM) simulations of past climates are currently unavailable. The TEX86 SST proxy is based upon the relative abundance of glycerol dialkyl glycerol tetraethers (GDGTs) preserved in organic-carbon-bearing sediments. This proxy has been used extensively on Cretaceous and Cenozoic materials and, in one study, Middle and Upper Jurassic sediments. Here TEX86 is applied, for the first time, to Lower Jurassic (Sinemurian–Pliensbachian) sediments cored at Deep Sea Drilling Project Site 547 in the North Atlantic. The abundance of GDGTs in these sediments is very low, despite biomarker and Rock-Eval data suggesting that thermal maturity is, generally, low. Sea-floor oxygenation and a high input of reworked terrestrially sourced organic matter may explain the low concentrations. For samples from which it was possible to quantify the relative abundance of GDGTs, TEX86 values range from 0.78 to 0.88, equating to SSTs in excess of >28˚C. These temperatures are broadly comparable with new GCM simulations of the Sinemurian and Pliensbachian stages and support the general view of a predominantly warm climate. The new proxy data suggest that, under favourable geological conditions, it is possible to extend the record of TEX86-based SSTs back into the Early Jurassic

The Jurassic–Cretaceous depositional and tectonic evolution of the southernwestern margin of the Neotethys Ocean, Northern Oman and United Arab Emirates

The concept that the autochthonous, parautochthonous and allochthonous Permian–Cretaceous sequences in the United Arab Emirates (UAE) and Oman record the transition from platform, slope to basin sedimentation within the southern part of Neotethys has been fundamental to the interpretation of the geological history of the region. The results of a major geological mapping programme of the UAE, carried out by the British Geological Survey for the Federal Government of the UAE, coupled with the detailed examination of key sections within northern Oman has led to a re-evaluation of the geological evolution of this region. This detailed study has led to a greater appreciation of the sedimentology and depositional setting of the sediments laid down along the northeastern Arabian continental margin during the Jurassic to Cretaceous, allowing a more refined model of Neotethys Ocean basin evolution to be established. The model charts the progressive breakup of the Arabian continental margin and closure of Neotethys during the mid to late Cretaceous and is divided into three main stages: Stage 1—Initial rifting and formation of the Neotethys Ocean, followed by a prolonged period of stable, passive margin sedimentation which extended from the Permian to Late Jurassic times; Stage 2—Uplift and erosion of the shelf margin during the Late Jurassic to Early Cretaceous, coincident with increased carbonate-clastic sedimentation in the outer ramp, distal slope and basinal areas; Stage 3—Increased instability during the Late Cretaceous leading to the breakup of the platform margin and foreland basin sedimentation accompanying the obduction of the Oman-UAE ophiolite. Data obtained for the upper part of the platform and platform margin to slope successions has revealed that the topography of the “shelf”-slope-basinal margin was more subdued than previously thought, with this more gentle ramp margin morphology persisting until early to mid-Cretaceous times when the platform margin started to become unstable during ophiolite obduction. The thrust-repeated allochthonous sedimentary rocks of the Hamrat Duru Group were deposited on the outer platform margin/lower slope rise to basinal plain of this basin margin and includes the dismembered remains of two turbidite fan systems which fed carbonate-rich detritus into deeper parts of the ocean. A re-evaluation of the chert-rich sequences, previously equated with deposition on the abyssal plain of Neotethys, has led to the conclusion that they may record sedimentation at a much shallower level within a starved ocean basin, possibly in a mid-ramp (above storm wave base) to outer ramp setting. A marked change in basin dynamics occurred during the mid-Cretaceous leading to the development of a shallow ramp basin margin in Oman with terrestrial to shallow marine sedimentary rocks interdigitating with red siliceous mudstones. By contrast, the contemporaneous succession in the Dibba Zone of the UAE indicates considerable instability on a steep shelf break. This instability is recorded by the presence of several major olistostrome deposits within the Aruma Group of the UAE which are thought to have been generated in advance of the rapidly obducting Oman-UAE ophiolite