Atomic-scale combination of germanium-zinc nanofibers for structural and electrochemical evolution

Alloys are recently receiving considerable attention in the community of rechargeable batteries as possible alternatives to carbonaceous negative electrodes; however, challenges remain for the practical utilization of these materials. Herein, we report the synthesis of germanium-zinc alloy nanofibers through electrospinning and a subsequent calcination step. Evidenced by in situ transmission electron microscopy and electrochemical impedance spectroscopy characterizations, this one-dimensional design possesses unique structures. Both germanium and zinc atoms are homogenously distributed allowing for outstanding electronic conductivity and high available capacity for lithium storage. The as-prepared materials present high rate capability (capacity of similar to 50% at 20 C compared to that at 0.2 C-rate) and cycle retention (73% at 3.0 C-rate) with a retaining capacity of 546 mAh g(-1) even after 1000 cycles. When assembled in a full cell, high energy density can be maintained during 400 cycles, which indicates that the current material has the potential to be used in a large-scale energy storage system

Using an Ishikawa diagram as a tool to assist memory and retrieval of relevant medical cases from the medical literature

<p>Abstract</p> <p>Studying medical cases is an effective way to enhance clinical reasoning skills and reinforce clinical knowledge. An Ishikawa diagram, also known as a cause-and-effect diagram or fishbone diagram, is often used in quality management in manufacturing industries.</p> <p>In this report, an Ishikawa diagram is used to demonstrate how to relate potential causes of a major presenting problem in a clinical setting. This tool can be used by teams in problem-based learning or in self-directed learning settings.</p> <p>An Ishikawa diagram annotated with references to relevant medical cases and literature can be continually updated and can assist memory and retrieval of relevant medical cases and literature. It could also be used to cultivate a lifelong learning habit in medical professionals.</p

The thalamic mGluR1-PLC??4 pathway is critical in sleep architecture

The transition from wakefulness to a nonrapid eye movement (NREM) sleep state at the onset of sleep involves a transition from low-voltage, high-frequency irregular electroencephalography (EEG) waveforms to large-amplitude, low-frequency EEG waveforms accompanying synchronized oscillatory activity in the thalamocortical circuit. The thalamocortical circuit consists of reciprocal connections between the thalamus and cortex. The cortex sends strong excitatory feedback to the thalamus, however the function of which is unclear. In this study, we investigated the role of the thalamic metabotropic glutamate receptor 1 (mGluR1)-phospholipase C ??4 (PLC??4) pathway in sleep control in PLC??4-deficient (PLC??4-/-) mice. The thalamic mGluR1-PLC??4 pathway contains synapses that receive corticothalamic inputs. In PLC??4-/- mice, the transition from wakefulness to the NREM sleep state was stimulated, and the NREM sleep state was stabilized, which resulted in increased NREM sleep. The power density of delta (??) waves increased in parallel with the increased NREM sleep. These sleep phenotypes in PLC??4-/- mice were consistent in TC-restricted PLC??4 knockdown mice. Moreover, in vitro intrathalamic oscillations were greatly enhanced in the PLC??4-/- slices. The results of our study showed that thalamic mGluR1-PLC??4 pathway was critical in controlling sleep architecture.ope

The Hubbard model within the equations of motion approach

The Hubbard model has a special role in Condensed Matter Theory as it is considered as the simplest Hamiltonian model one can write in order to describe anomalous physical properties of some class of real materials. Unfortunately, this model is not exactly solved except for some limits and therefore one should resort to analytical methods, like the Equations of Motion Approach, or to numerical techniques in order to attain a description of its relevant features in the whole range of physical parameters (interaction, filling and temperature). In this manuscript, the Composite Operator Method, which exploits the above mentioned analytical technique, is presented and systematically applied in order to get information about the behavior of all relevant properties of the model (local, thermodynamic, single- and two- particle ones) in comparison with many other analytical techniques, the above cited known limits and numerical simulations. Within this approach, the Hubbard model is shown to be also capable to describe some anomalous behaviors of the cuprate superconductors.Comment: 232 pages, more than 300 figures, more than 500 reference

International Veterinary Epilepsy Task Force recommendations for systematic sampling and processing of brains from epileptic dogs and cats

Traditionally, histological investigations of the epileptic brain are required to identify epileptogenic brain lesions, to evaluate the impact of seizure activity, to search for mechanisms of drug-resistance and to look for comorbidities. For many instances, however, neuropathological studies fail to add substantial data on patients with complete clinical work-up. This may be due to sparse training in epilepsy pathology and or due to lack of neuropathological guidelines for companion animals. The protocols introduced herein shall facilitate systematic sampling and processing of epileptic brains and therefore increase the efficacy, reliability and reproducibility of morphological studies in animals suffering from seizures. Brain dissection protocols of two neuropathological centres with research focus in epilepsy have been optimised with regards to their diagnostic yield and accuracy, their practicability and their feasibility concerning clinical research requirements. The recommended guidelines allow for easy, standardised and ubiquitous collection of brain regions, relevant for seizure generation. Tissues harvested the prescribed way will increase the diagnostic efficacy and provide reliable material for scientific investigations

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

A new approach to cure and reinforce cold-cured acrylics

Purpose: The low degree of polymerization of cold-cured acrylics has resulted in inferior mechanical properties and fracture vulnerability in orthodontics removable appliances. Methods: In this study, the effect of reinforcement by various concentrations of chopped E-glass fibers (0%, 1%, 2%, 3% and 5% by weight of resin powder) and post-curing microwave irradiation (800 W for 3 min) on the flexural strength of cold-cured acrylics was evaluated at various storage conditions (at room temperature for 1 day and 7 days; at water storage for 7, 14 and 30 days). Results: The data was analyzed by using 1-way and 2-way ANOVA, and a Tukey post hoc test (α = .05). The specimens with chopped E-glass fibers treated with post-curing microwave irradiation significantly increased the flexural strength of cold-cured PMMA. The optimal concentration might be 2% fibers under irradiation. Conclusions: The exhibited reinforcement effect lasted in a consistent trend for 14 days in water storage. A new fiber-acrylic mixing method was also developed. © 2012 The Author(s).published_or_final_versio

Reduced risk of Barrett’s esophagus in statin users: case–control study and meta-analysis

Background: Use of statins has been associated with a reduced incidence of esophageal adenocarcinoma in population-based studies. However there are few studies examining statin use and the development of Barrett’s esophagus. Aim: The purpose of this study was to examine the association between statin use and the presence of Barrett’s esophagus in patients having their first gastroscopy. Methods: We have performed a case–control study comparing statin use between patients with, and without, an incident diagnosis of non-dysplastic Barrett’s esophagus. Male Barrett’s cases (134) were compared to 268 male age-matched controls in each of two control groups (erosive gastro-esophageal reflux and dyspepsia without significant upper gastrointestinal disease). Risk factor and drug exposure were established using standardised interviews. Logistic regression was used to compare statin exposure and correct for confounding factors. We performed a meta-analysis pooling our results with three other case–control studies. Results: Regular statin use was associated with a significantly lower incidence of Barrett’s esophagus compared to the combined control groups [adjusted OR 0.62 (95 % confidence intervals 0.37–0.93)]. This effect was more marked in combined statin plus aspirin users [adjusted OR 0.43 (95 % CI 0.21–0.89)]. The inverse association between statin or statin plus aspirin use and risk of Barrett’s was significantly greater with longer duration of use. Meta-analysis of pooled data (1098 Barrett’s, 2085 controls) showed that statin use was significantly associated with a reduced risk of Barrett’s esophagus [pooled adjusted OR 0.63 (95 % CI 0.51–0.77)]. Conclusions: Statin use is associated with a reduced incidence of a new diagnosis of Barrett’s esophagus

Temperature effects on an InGaP (GaInP) (55)Fe X-ray photovoltaic cell.

This paper investigates the effects of temperature on an InGaP (GaInP) (55)Fe X-ray photovoltaic cell prototype for a radioisotope microbattery (also called a nuclear microbattery). An In0.5Ga0.5P p-i-n (5 μm i-layer) mesa photodiode was illuminated by a standard 206 MBq (55)Fe radioisotope X-ray source and characterised over the temperature range -20 °C to 100 °C. The electrical power output of the device reached its maximum value of 1.5 pW at a temperature of -20 °C. An open circuit voltage and a short circuit current of 0.82 V and 2.5 pA, respectively, were obtained at -20 °C. While the electrical power output and the open circuit voltage decreased with increasing temperature, an almost flat trend was found for the short circuit current. The cell conversion efficiency decreased from 2.1% at -20 °C to 0.7% at 100 °C

Outcome of pelvic arterial embolization for postpartum hemorrhage: A retrospective review of 117 cases

Objective: The aim of this study was to evaluate indications, efficacy, and complications associated with pelvic arterial embolization (PAE) for postpartum hemorrhage (PPH). Methods: We retrospectively reviewed the medical records of 117 consecutive patients who underwent PAE for PPH between January 2006 and June 2013. Results: In our single-center study, 117 women underwent PAE to control PPH refractory to conservative management including uterine massage, use of uterotonic agents, surgical repair of genital tract lacerations, and removal of retained placental tissues. Among 117 patients, 69 had a vaginal delivery and 48 had a Cesarean section. The major indication for embolization was uterine atony (54.7%). Other causes were low genital tract lacerations (21.4%) and abnormal placentation (14.5%). The procedure showed a clinical success rate of 88.0% with 14 cases of PAE failure; there were 4 hemostatic hysterectomies and 10 re-embolizations. On univariate analysis, PAE failure was associated with overt disseminated intravascular coagulation (P=0.009), transfusion of more than 10 red blood cell units (RBCUs, P=0.002) and embolization of both uterine and ovarian arteries (P=0.003). Multivariate analysis showed that PAE failure was only associated with transfusions of more than 10 RBCUs (odds ratio, 8.011; 95% confidence interval, 1.531-41.912; P=0.014) and embolization of both uterine and ovarian arteries (odds ratio, 20.472; 95% confidence interval, 2.715-154.365; P=0.003), which were not predictive factors, but rather, were the results of longer time for PAE. Three patients showed uterine necrosis and underwent hysterectomy. Conclusion: PAE showed high success rates, mostly without procedure-related complications. Thus, it is a safe and effective adjunct or alternative to hemostatic hysterectomy, when primary management fails to control PPH