Gear Acquisition Syndrome

"Gear Acquisition Syndrome, also known as GAS, is commonly understood as the musicians’ unrelenting urge to buy and own instruments and equipment as an anticipated catalyst of creative energy and bringer of happiness. For many musicians, it involves the unavoidable compulsion to spend money one does not have on gear perhaps not even needed. The urge is directed by the belief that acquiring another instrument will make one a better player. This book pioneers research into the complex phenomenon named GAS from a variety of disciplines, including popular music studies and music technology, cultural and leisure studies, consumption research, sociology, psychology and psychiatry. The newly created theoretical framework and empirical studies of online communities and offline music stores allow the study to consider musical, social and personal motives, which influence the way musicians think about and deal with equipment. As is shown, GAS encompasses a variety of practices and psychological processes. In an often life-long endeavour, upgrading the rig is accompanied by musical learning processes in popular music.

Aeronautics Application of Direct-Detection Doppler Wind Lidar: An Adapted Design Based on a Fringe-Imaging Michelson Interferometer as Spectral Analyzer

We report on the development of a novel direct-detection Doppler wind lidar (DD-DWL) within the strong requirements of an aeronautic feed-forward control application for gust load alleviation (GLA). This DD-DWL is based on fringe imaging of the Doppler-shifted backscatter of ultraviolet laser pulses in a field-widened Michelson interferometer (FW-FIMI) using a fast linear photodetector. The double approach of detailed simulation and demonstrator development is validated by field measurements with reference wind sensing instrumentation. These experiments allow us to establish wind determination precision at a high repeat rate, short range resolution and close distance of approximately 0.5 m/s, which is in accordance with the dedicated simulations. These findings lead us to the conclusion that this FW-FIMI-based Doppler wind lidar is a pertinent development meeting the special requirements of this aeronautics application. Second, the developed simulators are well suited (given their validation) to be used in the overall and full analysis as well as the optimization of the lidar-based GLA control scheme

Bender – An Educational Game for Teaching Agile Hardware Development

Within this paper, an educational game is presented that transfers Agile principles for the development of physical systems. The training leverages elements of Learning Factories (LF) to simulate an Agile hardware development project within two days. By doing so, the challenges of applying Agile within the hardware domain are realistically reflected. The training revolves around a physical wire bending machine, which a development team of four participants needs to modify within a realistic engineering and production setting. A trial with mechanical engineering students was conducted to validate the training design. The participants showed a positive attitude towards the active learning approach. Furthermore, the students expressed that they perceived the game to improve their learning regarding Agile hardware development

Research productivity during orthopedic surgery residency correlates with pre‑planned and protected research time: a survey of German‑speaking countries

Purpose The purpose of this study was to identify modifiable factors associated with research activity among residents working in orthopedic surgery and traumatology. Methods Residents at 796 university-affiliated hospitals in Austria, Germany, and Switzerland were invited to participate. The online survey consisted of questions that ascertained 13 modifiable and 17 non-modifiable factors associated with the residents’ current research activities. Responses of 129 residents were analyzed. Univariate linear regression was used to determine the association of individual factors with the current research activity (hours per week). The impact of significant non-modifiable factors (with unadjusted p values < 0.05) was controlled for using multivariate linear regression. Results The univariate analysis demonstrated six non-modifiable factors that were significantly associated with the current research activity: a University hospital setting (p < 0.001), an A-level hospital setting (p = 0.024), Swiss residents (p = 0.0012), the completion of a dedicated research year (p = 0.007), female gender (p = 0.016), and the department’s size (p = 0.048). Multivariate regression demonstrated that the number of protected research days per year (p < 0.029) and the percentage of protected days, that were known 1 week before (p < 0.001) or the day before (p < 0.001), were significantly associated with a higher research activity. Conclusions As hypothesized, more frequent and predictable protected research days were associated with higher research activity among residents in orthopedic surgery and traumatology. Level of evidence III

Photodissociation of small carbonaceous molecules of astrophysical interest

Astronomical observations have shown that small carbonaceous molecules can persist in interstellar clouds exposed to intense ultraviolet radiation. Current astrochemical models lack quantitative information on photodissociation rates in order to interpret these data. We here present ab initio multi-reference configuration-interaction calculations of the vertical excitation energies, transition dipole moments and oscillator strengths for a number of astrophysically relevant molecules: C3, C4, C2H, l- and c-C3H, l- and c-C3H2, HC3H, l-C4H and l-C5H. Highly excited states up to the 9'th root of each symmetry are computed, and several new states with large oscillator strengths are found below the ionization potentials. These data are used to calculate upper limits on photodissociation rates in the unattenuated interstellar radiation field by assuming that all absorptions above the dissociation limit lead to dissociation.Comment: Full tables, rates and cross sections are posted at http://www.strw.leidenuniv.nl/~ewine/phot

Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment

We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing.Comment: 25 pages, 15 figures, presented at and published in the proceedings of SPIE Astronomical Telescopes and Instrumentation 202

Global maps of soil temperature

Research in global change ecology relies heavily on global climatic grids derived from estimates of air temperature in open areas at around 2 m above the ground. These climatic grids do not reflect conditions below vegetation canopies and near the ground surface, where critical ecosystem functions occur and most terrestrial species reside. Here, we provide global maps of soil temperature and bioclimatic variables at a 1-km2 resolution for 0–5 and 5–15 cm soil depth. These maps were created by calculating the difference (i.e. offset) between in situ soil temperature measurements, based on time series from over 1200 1-km2 pixels (summarized from 8519 unique temperature sensors) across all the world\u27s major terrestrial biomes, and coarse-grained air temperature estimates from ERA5-Land (an atmospheric reanalysis by the European Centre for Medium-Range Weather Forecasts). We show that mean annual soil temperature differs markedly from the corresponding gridded air temperature, by up to 10°C (mean = 3.0 ± 2.1°C), with substantial variation across biomes and seasons. Over the year, soils in cold and/or dry biomes are substantially warmer (+3.6 ± 2.3°C) than gridded air temperature, whereas soils in warm and humid environments are on average slightly cooler (−0.7 ± 2.3°C). The observed substantial and biome-specific offsets emphasize that the projected impacts of climate and climate change on near-surface biodiversity and ecosystem functioning are inaccurately assessed when air rather than soil temperature is used, especially in cold environments. The global soil-related bioclimatic variables provided here are an important step forward for any application in ecology and related disciplines. Nevertheless, we highlight the need to fill remaining geographic gaps by collecting more in situ measurements of microclimate conditions to further enhance the spatiotemporal resolution of global soil temperature products for ecological applications

Global maps of soil temperature

Research in global change ecology relies heavily on global climatic grids derived from estimates of air temperature in open areas at around 2 m above the ground. These climatic grids do not reflect conditions below vegetation canopies and near the ground surface, where critical ecosystem functions occur and most terrestrial species reside. Here, we provide global maps of soil temperature and bioclimatic variables at a 1-km² resolution for 0–5 and 5–15 cm soil depth. These maps were created by calculating the difference (i.e., offset) between in-situ soil temperature measurements, based on time series from over 1200 1-km² pixels (summarized from 8500 unique temperature sensors) across all the world’s major terrestrial biomes, and coarse-grained air temperature estimates from ERA5-Land (an atmospheric reanalysis by the European Centre for Medium-Range Weather Forecasts). We show that mean annual soil temperature differs markedly from the corresponding gridded air temperature, by up to 10°C (mean = 3.0 ± 2.1°C), with substantial variation across biomes and seasons. Over the year, soils in cold and/or dry biomes are substantially warmer (+3.6 ± 2.3°C) than gridded air temperature, whereas soils in warm and humid environments are on average slightly cooler (-0.7 ± 2.3°C). The observed substantial and biome-specific offsets emphasize that the projected impacts of climate and climate change on near-surface biodiversity and ecosystem functioning are inaccurately assessed when air rather than soil temperature is used, especially in cold environments. The global soil-related bioclimatic variables provided here are an important step forward for any application in ecology and related disciplines. Nevertheless, we highlight the need to fill remaining geographic gaps by collecting more in-situ measurements of microclimate conditions to further enhance the spatiotemporal resolution of global soil temperature products for ecological applications

Global maps of soil temperature.

Research in global change ecology relies heavily on global climatic grids derived from estimates of air temperature in open areas at around 2 m above the ground. These climatic grids do not reflect conditions below vegetation canopies and near the ground surface, where critical ecosystem functions occur and most terrestrial species reside. Here, we provide global maps of soil temperature and bioclimatic variables at a 1-km2 resolution for 0-5 and 5-15 cm soil depth. These maps were created by calculating the difference (i.e. offset) between in situ soil temperature measurements, based on time series from over 1200 1-km2 pixels (summarized from 8519 unique temperature sensors) across all the world's major terrestrial biomes, and coarse-grained air temperature estimates from ERA5-Land (an atmospheric reanalysis by the European Centre for Medium-Range Weather Forecasts). We show that mean annual soil temperature differs markedly from the corresponding gridded air temperature, by up to 10°C (mean = 3.0 ± 2.1°C), with substantial variation across biomes and seasons. Over the year, soils in cold and/or dry biomes are substantially warmer (+3.6 ± 2.3°C) than gridded air temperature, whereas soils in warm and humid environments are on average slightly cooler (-0.7 ± 2.3°C). The observed substantial and biome-specific offsets emphasize that the projected impacts of climate and climate change on near-surface biodiversity and ecosystem functioning are inaccurately assessed when air rather than soil temperature is used, especially in cold environments. The global soil-related bioclimatic variables provided here are an important step forward for any application in ecology and related disciplines. Nevertheless, we highlight the need to fill remaining geographic gaps by collecting more in situ measurements of microclimate conditions to further enhance the spatiotemporal resolution of global soil temperature products for ecological applications

31st Annual Meeting and Associated Programs of the Society for Immunotherapy of Cancer (SITC 2016) : part two

Background The immunological escape of tumors represents one of the main ob- stacles to the treatment of malignancies. The blockade of PD-1 or CTLA-4 receptors represented a milestone in the history of immunotherapy. However, immune checkpoint inhibitors seem to be effective in specific cohorts of patients. It has been proposed that their efficacy relies on the presence of an immunological response. Thus, we hypothesized that disruption of the PD-L1/PD-1 axis would synergize with our oncolytic vaccine platform PeptiCRAd. Methods We used murine B16OVA in vivo tumor models and flow cytometry analysis to investigate the immunological background. Results First, we found that high-burden B16OVA tumors were refractory to combination immunotherapy. However, with a more aggressive schedule, tumors with a lower burden were more susceptible to the combination of PeptiCRAd and PD-L1 blockade. The therapy signifi- cantly increased the median survival of mice (Fig. 7). Interestingly, the reduced growth of contralaterally injected B16F10 cells sug- gested the presence of a long lasting immunological memory also against non-targeted antigens. Concerning the functional state of tumor infiltrating lymphocytes (TILs), we found that all the immune therapies would enhance the percentage of activated (PD-1pos TIM- 3neg) T lymphocytes and reduce the amount of exhausted (PD-1pos TIM-3pos) cells compared to placebo. As expected, we found that PeptiCRAd monotherapy could increase the number of antigen spe- cific CD8+ T cells compared to other treatments. However, only the combination with PD-L1 blockade could significantly increase the ra- tio between activated and exhausted pentamer positive cells (p= 0.0058), suggesting that by disrupting the PD-1/PD-L1 axis we could decrease the amount of dysfunctional antigen specific T cells. We ob- served that the anatomical location deeply influenced the state of CD4+ and CD8+ T lymphocytes. In fact, TIM-3 expression was in- creased by 2 fold on TILs compared to splenic and lymphoid T cells. In the CD8+ compartment, the expression of PD-1 on the surface seemed to be restricted to the tumor micro-environment, while CD4 + T cells had a high expression of PD-1 also in lymphoid organs. Interestingly, we found that the levels of PD-1 were significantly higher on CD8+ T cells than on CD4+ T cells into the tumor micro- environment (p < 0.0001). Conclusions In conclusion, we demonstrated that the efficacy of immune check- point inhibitors might be strongly enhanced by their combination with cancer vaccines. PeptiCRAd was able to increase the number of antigen-specific T cells and PD-L1 blockade prevented their exhaus- tion, resulting in long-lasting immunological memory and increased median survival