Multichannel detection of acoustic emissions and localization of the source by using a hybrid programming system

The detection of acoustic emissions with multiple channels and different kind of sensors (ultrasound electronic sensors and optical fiber sensors) is presented. The source localization based on the times of arrival is also carried out and different strategies for solving the location equations are compared. The most efficient strategy in terms of computational and complexity costs versus performance has been selected and the error propagation is analyzed. The errors of the acoustic emission source location (localization process) are evaluated from the errors of the times of arrival (detection process). For that, a hybrid programming architecture is proposed. It is formed by a virtual instrumentation system for the acquisition and the detection of multiple acoustic channels and an algorithms-oriented programming system for the implementation of the localization techniques (back-propagation and multiple-source separation algorithms could also be implemented in this system). Finally the communication between both systems is performed by a packet transfer protocol that allows remote operation (e.g. a local monitoring and a remote analysis and diagnosis).This work has been supported by the Spanish National Ministry of Science and Innovation, under the R&D project No. DPI 2009-14628-C03-01 and the scholarship FPI No. BES-2010-042083

Instrumentation system for location of partial discharges using acoustic detection with piezoelectric transducers and optical fiber sensors

In this paper, a multichannel instrumentation system for the location of partial discharges (PDs) in power transformers is presented. It is based on the detection of the acoustic emissions from PDs in oil with several piezoelectric (PZT) and fiber optic sensors. An acoustic detection and location approach is proposed based on a time reference given by one fiber optic sensor installed inside the tank and the times of arrival to several PZT sensors installed outside the tank (two in front of each phase windings of a three phase transformer for a typical application). The signal processing includes digital denoising techniques and time-difference lookup table-based 3-D location algorithms; these algorithms have been implemented with virtual instrumentation. The system is tested in an acoustic experimental setup and the location accuracy is evaluated. Finally, the error propagation from the times of arrival and the influence of the number of sensors and their sites in the 3-D location algorithm were analyzed.This work was supported in part by the Spanish National Ministry of Science and Innovation under the Project DPI 2009-14628-C03-01 and in part by the scholarship FPI under Grant BES-2010-04208

Highly Enantioselective Iridium(I)-Catalyzed Hydrocarbonation of Alkenes: A Versatile Approach to Heterocyclic Systems Bearing Quaternary Stereocenters

We report a versatile, highly enantioselective intramolecular hydrocarbonation reaction that provides a direct access to heteropolycyclic systems bearing chiral quaternary carbon stereocenters. The method, which relies on an iridium(I)/bisphosphine chiral catalyst, is particularly efficient for the synthesis of five-, six- and seven-membered fused indole and pyrrole products, bearing one and two stereocenters, with enantiomeric excesses of up to >99 %. DFT computational studies allowed to obtain a detailed mechanistic profile and identify a cluster of weak non-covalent interactions as key factors to control the enantioselectivityThis work received financial support from the Spanish MINECO (SAF2016-76689-R, PID2019-108624RB-I00, CTQ2017-84767-P, PID2020-118579GB-I00), the Xunta de Galicia (ED431C 2017/19, 2015-CP082, Centro Singular de Investigación de Galicia accreditation 2019-2022, ED431G 2019/03, a predoctoral Fellowship to A. A. and M. C. and a postdoctoral Fellowship to D. F. F, ED481B-2019-005) and the ERDF, ERC (Adv. Grant No. 340055). The Orfeo-Cinqa network (CTQ2016-81797-REDC)S

Iridium(I)-Catalyzed Intramolecular Cycloisomerization of Enynes: Scope and Mechanistic Course

NOTICE: This is the peer reviewed version of the following article: David F. Fernández, Catarina A. B. Rodrigues, Martín Calvelo, Moisés Gulías, José L. Mascareñas and Fernando López (2018), Iridium(I)-Catalyzed Intramolecular Cycloisomerization of Enynes: Scope and Mechanistic Course. ACS Catalysis, 2018, 8 (8), 7397–7402 [DOI: 10.1021/acscatal.8b02139]. This article may be used for non-commercial purposes in accordance with American Chemical Society Terms and Conditions for self-archivingWe report an Ir(I)-catalyzed cycloisomerization methodology that provides access to carbocyclic systems bearing exo-alkene moieties from alkynyl-equipped acyclic precursors. The method relies on the C–H activation of olefinic and (hetero)aromatic C(sp2)–H bonds, followed by an exocyclization to a tethered alkyne, and provides interesting cyclic diene products that are amenable of further elaboration. Importantly, DFT calculations suggests that, in contrast to related hydrocarbonations of alkenes in which either migratory insertions or C–C reductive eliminations have been suggested to be rate-determining, in our reactions, the energetic barrier of these steps is lower than that of the previous C–H activationThis work received financial support from the Spanish MINECO (Nos. SAF2016-76689-R, CTQ2016-77047-P, and CTQ2017-84767-P, as well as an FPI fellowship to D.F.F.), the Xunta de Galicia (Nos. ED431C 2017/19 and 2015-CP082, as well as Centro Singular de Investigación de Galicia accreditation 2016-2019 ED431G/09 and predoctoral fellowship to M.C.), the ERDF, ERC (Adv. Grant No. 340055) and the Orfeo-Cinqa network (No. CTQ2016-81797-REDC). Dr. Rebeca García-Fandiño is acknowledged for helpful suggestions on DFT studiesS

Intermodal exchange stations in the city of Madrid

The City of Madrid is putting into operation Intermodal Exchange Stations (IESs) to make connections between urban and suburban transportation modes easier for users of public transportation. The purpose of this article is to evaluate the actual effects that the implementation of IESs in the City of Madrid has on the affected stakeholders: users, public transportation operators, infrastructure managers, the government, the abutters and other citizens. We develop a methodology intended to help assess the welfare gains and losses for each stakeholder. Then we apply this methodology to the case study of the Avenida de América IES in the city of Madrid. We found that it is indeed possible to arrive at win–win solutions for the funding of urban transportation infrastructure, as long as the cost-benefit ratio of the project is high enough. Commuters save travel time. Bus companies diminish their costs of operation. The abutters gain in quality of life. The private operator of the infrastructure makes a fair profit. And the government is able to promote these infrastructure facilities without spending more of its scarce budgetary resources

Molecular Cytogenetic Analysis of the European Hake Merluccius merluccius (Merlucciidae, Gadiformes): U1 and U2 snRNA Gene Clusters Map to the Same Location

The European hake (Merluccius merluccius) is a highly valuable and intensely fished species in which a long-term alive stock has been established in captivity for aquaculture purposes. Due to their huge economic importance, genetic studies on hakes were mostly focused on phylogenetic and phylogeographic aspects; however chromosome numbers are still not described for any of the fifteen species in the genus Merluccius. In this work we report a chromosome number of 2n = 42 and a karyotype composed of three meta/submetacentric and 18 subtelo/telocentric chromosome pairs. Telomeric sequences appear exclusively at both ends of every single chromosome. Concerning rRNA genes, this species show a single 45S rDNA cluster at an intercalary location on the long arm of subtelocentric chromosome pair 12; the single 5S rDNA cluster is also intercalary to the long arm of chromosome pair 4. While U2 snRNA gene clusters map to a single subcentromeric position on chromosome pair 13, U1 snRNA gene clusters seem to appear on almost all chromosome pairs, but showing bigger clusters on pairs 5, 13, 16, 17 and 19. The brightest signals on pair 13 are coincident with the single U2 snRNA gene cluster signals. Therefore, the use of these probes allows the unequivocal identification of at least 7 of the chromosome pairs that compose the karyotype of Merluccius merluccius thus opening the way to integrate molecular genetics and cytological data on the study of the genome of this important species.Versión del editor4,411

Phytotoxicity of alkaloids, coumarins and flavonoids isolated from 11 species belonging to the Rutaceae and Meliaceae families

Meliaceae and Rutaceae families are known for the high diversity of their secondary metabolites, which include many groups that represent a rich source of structural diversity, and are good candidates as sources of allelochemicals that could be useful in agriculture. In the work described here the bioactivity profiles were evaluated for 3 alkaloids (1–3), 12 coumarins (4–15), 2 phenylpropanoic acid derivatives (16 and 17) and 14 flavonoids (18–31) from 11 species belonging to the Meliaceae and Rutaceae families. All compounds were tested in the wheat coleoptile bioassay and those that showed the highest activities were tested on the STS (Standard Target Species) Lepidium sativum (cress), Lactuca sativa (lettuce), Lycopersicon esculentum (tomato), and Allium cepa (onion). Most of the isolated compounds showed phytotoxic activity and graveoline (3), psoralen (8), and flavone (18) were the most active, with bioactivity levels similar to that of the commercial herbicide Logran1. The results indicate that these compounds could be involved as semiochemicals in the allelopathic interactions of these plant species

The Fourteenth Data Release of the Sloan Digital Sky Survey: First Spectroscopic Data from the extended Baryon Oscillation Spectroscopic Survey and from the second phase of the Apache Point Observatory Galactic Evolution Experiment

The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since July 2014. This paper describes the second data release from this phase, and the fourteenth from SDSS overall (making this, Data Release Fourteen or DR14). This release makes public data taken by SDSS-IV in its first two years of operation (July 2014-2016). Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey (eBOSS); the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data driven machine learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS website (www.sdss.org) has been updated for this release, and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020, and will be followed by SDSS-V.Comment: SDSS-IV collaboration alphabetical author data release paper. DR14 happened on 31st July 2017. 19 pages, 5 figures. Accepted by ApJS on 28th Nov 2017 (this is the "post-print" and "post-proofs" version; minor corrections only from v1, and most of errors found in proofs corrected

The inventory of geological heritage of the state of São Paulo, Brazil: Methodological basis, results and perspectives

An inventory of geological sites based on solid and clear criteria is a first step for any geoconservation strategy. This paper describes the method used in the geoheritage inventory of the State of São Paulo, Brazil, and presents its main results. This inventory developed by the geoscientific community aimed to identify geosites with scientific value in the whole state, using a systematic approach. All 142 geosites representative of 11 geological frameworks were characterised and quantitatively evaluated according to their scientific value and risk of degradation, in order to establish priorities for their future management. An online database of the inventory is under construction, which will be available to be easily consulted and updated by the geoscientific community. All data were made available to the State Geological Institute as the backbone for the implementation of a future state geoconservation strategy.The authors acknowledge the Science Without Borders Programme, Process 075/2012, which supported this study and the São Paulo Research Foundation (FAPESP), Process 2011/17261-6. We also thanks C. Mazoca for his help with maps and figures.info:eu-repo/semantics/acceptedVersio