Designing consumer electronic products for the circular economy using recycled Acrylonitrile Butadiene Styrene (ABS): a case study

This study considers the feasibility of using 100% recycled Acrylonitrile Butadiene Styrene (rABS) in the caseworks of small consumer electronic products as a step towards more circular design and manufacturing. A Digitally Enhanced Cordless Telephone (DECT) handset was chosen as a representative example of such a product. Materials testing on the rABS demonstrated that 100% recycled ABS has similar properties to virgin ABS and can be substituted for virgin ABS as long as the product design allows for the slightly stiffer nature of the rABS and addresses issues of surface finish and ability to colour. By clearly understanding these issues at the outset of the design process, and by adapting the designs appropriately at the outset, it was possible to produce an rABS handset which was as robust and as cosmetically acceptable as one made of virgin ABS. This suggests that the recycled material could be used widely in this type of product and also at reduced cost to using virgin ABS. Furthermore, an abridged Life Cycle Analysis of the existing handset suggested that other issues associated with the environmental impact of the product could be relatively easily addressed at the design stage by considering energy use and end of life issues

Recovery and reuse of structural products from end-of-life buildings

YesBuildings and construction have been identified as having the greatest potential for circular economy value creation. One source of value creation is to recover and reuse building products from end-of-service-life buildings, rather than destructive demolition and downcycling. While there is a trade in non-structural and heritage product recovery and reuse, the largest volume, mass and value of most buildings comprise structural elements – concrete, brick and masonry, and steel – which present many challenges. A comprehensive literature review confirms limited attention to innovation and advanced techniques to address these challenges and therefore the potential reuse of the stocks of accumulated building products globally and associated environmental benefits. Potential techniques being tested in an Engineering and Physical Sciences Research Council circular economy research programme are referenced as a key building block towards circular economy building system redesign.Engineering and Physical Sciences Research Council - research project Rebuild (EPSRC EP/P008917/1