Synthetic Geopolymers for Controlled Delivery of Oxycodone: Adjustable and Nanostructured Porosity Enables Tunable and Sustained Drug Release

In this article we for the first time present a fully synthetic mesoporous geopolymer drug carrier for controlled release of opioids. Nanoparticulate precursor powders with different Al/Si-ratios were synthesized by a sol-gel route and used in the preparation of different geopolymers, which could be structurally tailored by adjusting the Al/Si-ratio and the curing temperatures. In particular, it was shown that the pore sizes of the geopolymers decreased with increasing Al/Si ratio and that completely mesoporous geopolymers could be produced from precursor particles with the Al/Si ratio 2∶1. The mesoporosity was shown to be associated with a sustained and linear in vitro release profile of the opioid oxycodone. A clinically relevant release period of about 12 h was obtained by adjusting the size of the pellets. The easily fabricated and tunable geopolymers presented in this study constitute a novel approach in the development of controlled release formulations, not only for opioids, but whenever the clinical indication is best treated with a constant supply of drugs and when the mechanical stability of the delivery vehicle is crucial

Geopolymer/PEG Hybrid Materials Synthesis and Investigation of the Polymer Influence on Microstructure and Mechanical Behavior

Geopolymers are aluminosilicate inorganic polymers, obtained from the alkali activation of powders containing SiO2+Al2O3>80wt%, mainly proposed as environmentally friendly building materials. In this work, metakaolin-based geopolymers have been prepared and a water-soluble polymer, polyethylene glycol (PEG), has been added in different percentages to obtain organic-inorganic hybrid geopolymers. The influence of both the polymer amount and aging time on the structure and the mechanical behavior of the materials were investigated. FTIR spectroscopy allowed us to follow the evolution of the aluminosilicate framework during the geopolymerization process. This analysis revealed that PEG leads to a network which is rich in Al-O-Si bonds and forms H-bonds with the inorganic phase. SEM microscope showed that the two phases are interpenetrated on micrometric scales. Traction and bending tests have been carried out on appropriate samples to investigate the mechanical behavior of the obtained hybrids, showing that both PEG content and aging time affect the material behavior

Kaolinite Defect defined material properties A soft X ray and first principles study of the band gap

By combining X ray absorption spectroscopy and first principles calculations we have determined the electronic structure of synthetic and natural kaolinite as a model system for engineered and natural clay materials. We have analyzed defect states in the band gap and find that both natural and synthetic kaolinite contain defects where oxygen replaces hydrogen in one of the Al 0 0 1 hydroxyl groups of the kaolinite clay sheets. The band gap of both synthetic and natural kaolinite is found to decrease by about 3.2 eV as this defect is forme

Geopolymer/PEG Hybrid Materials Synthesis and Investigation of the Polymer Influence on Microstructure and Mechanical Behavior

Geopolymers are aluminosilicate inorganic polymers, obtained from the alkali activation of powders containing SiO2+Al2O3>80wt%, mainly proposed as environmentally friendly building materials. In this work, metakaolin-based geopolymers have been prepared and a water-soluble polymer, polyethylene glycol (PEG), has been added in different percentages to obtain organic-inorganic hybrid geopolymers. The influence of both the polymer amount and aging time on the structure and the mechanical behavior of the materials were investigated. FTIR spectroscopy allowed us to follow the evolution of the aluminosilicate framework during the geopolymerization process. This analysis revealed that PEG leads to a network which is rich in Al-O-Si bonds and forms H-bonds with the inorganic phase. SEM microscope showed that the two phases are interpenetrated on micrometric scales. Traction and bending tests have been carried out on appropriate samples to investigate the mechanical behavior of the obtained hybrids, showing that both PEG content and aging time affect the material behavior