71 research outputs found

    Dispersion studies on multimode polymer spiral waveguides for board-level optical interconnects

    Get PDF
    Dispersion studies are conducted on 1m long multimode polymer spiral waveguides with different refractive index profiles. Bandwidth-length products >40GHzxm are obtained from such waveguides under a 50/125 um MMF, indicating the potential of this technology.The authors would like to acknowledge Dow Corning for providing the waveguide samples and EPSRC for supporting the work.This is the accepted manuscript. The final version is available at http://dx.doi.org/10.1109/OIC.2015.711567

    β-pyrophosphate: A potential biomaterial for dental applications

    Get PDF
    Tooth hypersensitivity is a growing problem affecting both the young and ageing population worldwide. Since an effective and permanent solution is not yet available, we propose a new methodology for the restoration of dental enamel using femtosecond lasers and novel calcium phosphate biomaterials. During this procedure the irradiated mineral transforms into a densified layer of acid resistant iron doped β-pyrophosphate, bonded with the surface of eroded enamel. Our aim therefore is to evaluate this densified mineral as a potential replacement material for dental hard tissue. To this end, we have tested the hardness of β-pyrophosphate pellets (sintered at 1000 °C) and its mineral precursor (brushite), the wear rate during simulated tooth-brushing trials and the cytocompatibility of these minerals in powder form. It was found that the hardness of the β-pyrophosphate pellets is comparable with that of dental enamel and significantly higher than dentine while, the brushing trials prove that the wear rate of β-pyrophosphate is much slower than that of natural enamel. Finally, cytotoxicity and genotoxicity tests suggest that iron doped β-pyrophosphate is cytocompatible and therefore could be used in dental applications. Taken together and with the previously reported results on laser irradiation of these materials we conclude that iron doped β-pyrophosphate may be a promising material for restoring acid eroded and worn enamel

    High-Bandwidth and Large Coupling Tolerance Graded-Index Multimode Polymer Waveguides for On-Board High-Speed Optical Interconnects

    Get PDF
    Optical interconnects have attracted significant research interest for use in short-reach board-level optical communication links in supercomputers and data centres. Multimode polymer waveguides in particular constitute an attractive technology for on-board optical interconnects as they provide high bandwidth, offer relaxed alignment tolerances, and can be cost-effectively integrated onto standard printed circuit boards (PCBs). However, the continuing improvements in bandwidth performance of optical sources make it important to investigate approaches to develop high bandwidth polymer waveguides. In this paper, we present dispersion studies on a graded-index (GI) waveguide in siloxane materials designed to deliver high bandwidth over a range of launch conditions. Bandwidth-length products of >70 GHzxm and ~65 GHzxm are observed using a 50/125 um multimode fibre (MMF) launch for input offsets of +/- 10 um without and with the use of a mode mixer respectively; and enhanced values of >100 GHzxm are found under a 10x microscope objective launch for input offsets of ~18 x 20 um^2. The large range of offsets is within the -1 dB alignment tolerances. A theoretical model is developed using the measured refractive index profile of the waveguide, and general agreement is found with experimental bandwidth measurements. The reported results clearly demonstrate the potential of this technology for use in high-speed board-level optical links, and indicate that data transmission of 100 Gb/s over a multimode polymer waveguide is feasible with appropriate refractive index engineering.The authors would like to acknowledge Dow Corning for providing the waveguide samples and EPSRC via the Complex Photonic Systems II (COPOS II) project for supporting the work.This is the author accepted manuscript. The final version is available from IEEE via http://dx.doi.org/10.1109/JLT.2015.250061

    GREENER pharmaceuticals for more sustainable healthcare

    Get PDF
    This is the final version. Available on open access from the American Chemical Society via the DOI in this record. Medicines are essential to human health but can also impact the aquatic and terrestrial environment after use by patients and release via excreta into wastewater. We highlight the need for a GREENER approach to identify and meet important environmental criteria, which will help reduce the impact of medicinal residues on the environment. These criteria include effect reduction by avoiding nontarget effects or undesirable moieties, exposure reduction via lower emissions or environmental (bio)degradability, no PBT (persistent, bioaccumulative, and toxic) substances, and risk mitigation. With all of these criteria, however, patient health is of primary importance as medicines are required to be safe and efficacious for treating diseases. We discuss the feasibility of including these criteria for green by design active pharmaceutical ingredients in the process of drug discovery and development and which tools or assays are needed to accomplish this. The integrated GREENER approach can be used to accelerate discussions about future innovations in drug discovery and development.Innovative Medicines Initiative 2 Joint Undertakin

    2-D Electronic Spectroscopy on the light-dependent enzyme protochlorophyllide oxidoreductase

    Get PDF
    In photosynthesis, quantum coherence in light harvesting complexes could form the basis for the highly efficient propagation of excited states within the photosynthetic membranes of bacteria and plants. Recent studies on Photosystem II reaction centres extends the possible relevance of electronic coherence to the photochemical steps of photosynthesis; it was shown that coherent states are sufficiently long-lived, at room temperature, to persist during the initial steps of electron transfer. This extension of quantum coherence, from the energy transfer to the energy trapping steps of photosynthesis, made it timely to investigate if quantum coherence also plays a role in the formation of product states in enzyme catalysis. Given the short timescales involved it was necessary to study an enzyme where the catalytic cycle can be triggered by femtosecond light pulses, so protochlorophyllide oxidoreductase (POR) was selected as an ideal model system. 2-dimensional electronic spectroscopy (2DES) was used to investigate the presence of quantum coherence in the intermediates of the light-dependent reduction of protochlorophyllide (Pchlide) to chlorophyllide (Chlide) catalysed by POR

    Exogenous mineralization of hard tissues using photo-absorptive minerals and femto-second lasers; the case of dental enamel

    Get PDF
    A radical new methodology for the exogenous mineralization of hard tissues is demonstrated in the context of laser-biomaterials interaction. The proposed approach is based on the use of femtosecond pulsed lasers (fs) and Fe³⁺-doped calcium phosphate minerals (specifically in this work fluorapatite powder containing Fe₂O₃ nanoparticles (NP)). A layer of the synthetic powder is applied to the surface of eroded bovine enamel and is irradiated with a fs laser (1040 nm wavelength, 1 GHz repetition rate, 150 fs pulse duration and 0.4 W average power). The Fe₂O₃ NPs absorb the light and may act as thermal antennae, dissipating energy to the vicinal mineral phase. Such a photothermal process triggers the sintering and densification of the surrounding calcium phosphate crystals thereby forming a new, dense layer of typically 20 μm in thickness, which is bonded to the underlying surface of the natural enamel. The dispersed iron oxide NPs, ensure the localization of temperature excursion, minimizing collateral thermal damage to the surrounding natural tissue during laser irradiation. Simulated brushing trials (pH cycle and mechanical force) on the synthetic layer show that the sintered material is more acid resistant than the natural mineral of enamel. Furthermore, nano-indentation confirms that the hardness and Young’s modulus of the new layers are significantly more closely matched to enamel than current restorative materials used in clinical dentistry. Although the results presented herein are exemplified in the context of bovine enamel restoration, the methodology may be more widely applicable to human enamel and other hard-tissue regenerative engineering

    Probing extreme environments with the Cherenkov Telescope Array

    Full text link
    The physics of the non-thermal Universe provides information on the acceleration mechanisms in extreme environments, such as black holes and relativistic jets, neutron stars, supernovae or clusters of galaxies. In the presence of magnetic fields, particles can be accelerated towards relativistic energies. As a consequence, radiation along the entire electromagnetic spectrum can be observed, and extreme environments are also the most likely sources of multi-messenger emission. The most energetic part of the electromagnetic spectrum corresponds to the very-high-energy (VHE, E>100 GeV) gamma-ray regime, which can be extensively studied with ground based Imaging Atmospheric Cherenkov Telescopes (IACTs). The results obtained by the current generation of IACTs, such as H.E.S.S., MAGIC, and VERITAS, demonstrate the crucial importance of the VHE band in understanding the non-thermal emission of extreme environments in our Universe. In some objects, the energy output in gamma rays can even outshine the rest of the broadband spectrum. The Cherenkov Telescope Array (CTA) is the next generation of IACTs, which, with cutting edge technology and a strategic configuration of ~100 telescopes distributed in two observing sites, in the northern and southern hemispheres, will reach better sensitivity, angular and energy resolution, and broader energy coverage than currently operational IACTs. With CTA we can probe the most extreme environments and considerably boost our knowledge of the non-thermal Universe.Comment: Submitted as input to ASTRONET Science Vision and Infrastructure roadmap on behalf of the CTA consortiu

    Unos L-alanil-L-glutamina tijekom kratkotrajne visokointenzivne vježbe u uvjetima blagoga hidracijskoga stresa

    Get PDF
    The effect of acute L-alanyl-L-glutamine (AG) ingestion on selected hormonal and electrolyte measures was examined during repetitive, short duration, high intensity exercise with mild hypohydration. Subjects (20.3±1.1 yrs; 180.3±10.4 cm; 83.1±14.0 kg; 11.6±3.6% body fat) reported to the Human Performance Laboratory on four occasions. During each trial subjects were hypohydrated to -2.5% of their baseline body mass. During one trial (DHY) subjects rested in a recumbent position for 45 minutes before commencing the exercise session. During the other three trials subjects were rehydrated to 1.5% of their baseline body mass, before exercise, by drinking water only (W), or with two different doses of AG – a low dose (LDAG: 0.05 g�kg-1) and a high dose (HDAG: 0.2 g�kg-1). The exercise protocol consisted of ten 10-second sprints on a cycle ergometer with a 1-min rest between each sprint. Blood draws were collected once the subject achieved the desired level of hypohydration, immediately pre-exercise, immediately post-exercise, and 24 hrs postexercise. Blood samples were analyzed for glutamine, potassium, sodium, aldosterone, arginine vasopressin, C-reactive protein, interleukin-6, malondialdehyde, testosterone, cortisol, ACTH, and growth hormone. The area under the curve (AUC) analysis demonstrated significantly greater sodium concentrations for DHY compared to all other trials. The AUC analysis for aldosterone showed significantly lower concentrations at LDAG compared to DHY. No other differences between trials were observed in any other hormonal or biochemical responses. AG ingestion during a short duration, anaerobic exercise and mild hypohydration stress had a limited effect on selected hormonal and biochemical measures.Učinci akutnoga, trenutačnoga uzimanja L-alanil-L-glutamina (AG) na odabrane hormonske i elektrolitne pokazatelje ispitani su tijekom ponavljajuće kratkotrajne visokointenzivne aktivnosti u uvjetima blage hipohidracije ispitanika. Ispitanici (20,3±1,1 godina; 180,3±10,4 cm; 83,1±14,0 kg; 11,6±3,6% tjelesne masti) bili su testirani u Human Performance Laboratory u četiri navrata. Tijekom svakoga pojedinačnoga mjerenja ispitanici su bili hipohidrirani do -2,5% svoje početne, osnovne tjelesne mase. Tijekom prvoga testiranja (DHY) ispitanici su se odmarali ležeći 45 minuta prije no što su počeli provoditi protokol vježbanja. Tijekom sljedeća tri mjerenja ispitanici su rehidrirani do 1,5% njihove početne tjelesne mase prije vježbanja, i to: pijenjem samo vode (W) te unosom dviju različitih doza AG - male doze (LDAG: 0,05 g∙kg-1) i velike doze (HDAG: 0,2 g∙kg-1). Protokol vježbanja sastojao se od po deset sprintova na bicikl-ergometru u trajanju od 10 sekunda s jednominutnim odmorom između svakoga sprinta. Uzorci krvi vađeni su odmah nakon što je ispitanik dosegao željenu razinu hipohidracije, neposredno prije početka vježbanja, neposredno nakon završetka vježbanja i 24 sata nakon vježbanja. U uzorcima krvi analizirana je koncentracija glutamina, kalija, natrija, aldosterona, arginin vazopresina, C-reaktivnoga proteina, interleukina-6, malondialdehida, testosterona, kortizola, ACTH-a i hormona rasta. Analiza površine ispod krivulje pokazala je statistički značajno veću razinu koncentracije natrija u ispitanika u prvom testu (DHY) u odnosu na sva ostala mjerenja. Analiza površine ispod krivulje za aldosteron je pokazala značajno nižu koncentraciju u testu LDAG u odnosu na test DHY. Nisu zapažene značajne razlike između pojedinih mjerenja ni u jednoj drugoj hormonskoj i biokemijskoj reakciji na protokol vježbanja. Uzimanje AG tijekom kratkotrajne anaerobne aktivnosti i u stanju blagoga hipohidracijskoga stresa pokazalo je ograničene učinke na odabrane hormonske i biokemijske pokazatelje
    corecore