Aluminium-doped zinc oxide thin film contacts for use in dye-sensitized solar cells

Aluminium-doped zinc oxide films are deposited for use in dye-sensitized solar cells. High temperature stability is achieved by varying the sputtering conditions, whilst maintaining high transmission. The most stable film of the set deposited increased to only 9.4 Ω/sq after heating in air at 400°C from 5.1 Ω/sq. Initial solar cells are made with encouraging efficiencies of 8.2% reported

Zinc oxide-doped indium oxide (IZO): an amorphous transparent conducting oxide for use in tandem solar cells

Zinc oxide-doped indium oxide (IZO) is an amorphous transparent conducting oxide (TCO) exhibiting excellent properties for use in tandem solar cells. Similar to high mobility TCOs, it has a reduced absorption of near IR photons leading to an increased transmission to the bottom cell in a tandem stack. As a result, IZO is a potential replacement of traditional TCOs used as the top contact in the Cu(In,Ga)Se2 cell when used in a tandem solar cell. A monolithically fabricated dye-sensitized|Cu(In,Ga)Se2 tandem solar cell suffers from corrosion of the Cu(In,Ga)Se2 absorber by the DSC electrolyte. This paper reports the successful use of IZO to reduce the rate of etching compared to AZO of similar thickness, when used to prevent the etching of an Au substrate

Supporting antidepressant discontinuation: the development and optimisation of a digital intervention for patients in UK primary care using a theory, evidence and person-based approach.

OBJECTIVES: We aimed to develop a digital intervention to support antidepressant discontinuation in UK primary care that is scalable, accessible, safe and feasible. In this paper, we describe the development using a theory, evidence and person-based approach. DESIGN: Intervention development using a theory, evidence and person-based approach. SETTING: Primary Care in the South of England. PARTICIPANTS: Fifteen participants with a range of antidepressant experience took part in 'think aloud' interviews for intervention optimisation. INTERVENTION: Our digital intervention prototype (called 'ADvisor') was developed on the basis of a planning phase consisting of qualitative and quantitative reviews, an in-depth qualitative study, the development of guiding principles and a theory-based behavioural analysis. Our optimisation phase consisted of 'think aloud' interviews where the intervention was iteratively refined. RESULTS: The qualitative systematic review and in-depth qualitative study highlighted the centrality of fear of depression relapse as a key barrier to discontinuation. The quantitative systematic review showed that psychologically informed approaches such as cognitive-behavioural therapy were associated with greater rates of discontinuation than simple advice to reduce. Following a behavioural diagnosis based on the behaviour change wheel, social cognitive theory provided a theoretical basis for the intervention. The intervention was optimised on the basis of think aloud interviews, where participants suggested they like the flexibility of the system and found it reassuring. Changes were made to the tone of the material and the structure was adjusted based on this qualitative feedback. CONCLUSIONS: 'ADvisor' is a theory, evidence and person-based digital intervention designed to support antidepressant discontinuation. The intervention was perceived as helpful and reassuring in optimisation interviews. Trials are now needed to determine the feasibility, clinical and cost-effectiveness of this approach

Novel Mutations in PTH1R Associated with Primary Failure of Eruption and Osteoarthritis

Autosomal dominant mutations in PTH1R segregate with primary failure of eruption (PFE), marked by clinical eruption failure of adult teeth without mechanical obstruction. While the diagnosis of PFE conveys a poor dental prognosis, there are no reports of PFE patients who carry PTH1R mutations and exhibit any other skeletal problems. We performed polymerase chain reaction–based mutational analysis of the PTH1R gene to determine the genetic contribution of PTH1R in 10 families with PFE. Sequence analysis of the coding regions and intron-exon boundaries of the PTH1R gene in 10 families (n = 54) and 7 isolated individuals revealed 2 novel autosomal dominant mutations in PTH1R (c.996_997insC and C.572delA) that occur in the coding region and result in a truncated protein. One family showed incomplete penetrance. Of 10 families diagnosed with PFE, 8 did not reveal functional (nonsynonymous) mutations in PTH1R; furthermore, 4 families and 1 sporadic case carried synonymous single-nucleotide polymorphisms. Five PFE patients in 2 families carried PTH1R mutations and presented with osteoarthritis. We propose that the autosomal dominant mutations of PTH1R that cause PFE may also be associated with osteoarthritis; a dose-dependent model may explain isolated PFE and osteoarthritis in the absence of other known symptoms in the skeletal system

An unusual cause of gastrointestinal bleeding: duodenal lipoma.

‘The final, published version of this article is available at http://www.karger.com/ 10.1159/000327219Common causes of chronic upper gastrointestinal bleeding include oesophageal varices, gastroduodenal ulcers and malignancy, and patients mostly present with iron deficiency type anaemia. We present the case of a 60-year-old lady who presented with iron deficiency anaemia and on investigation was found to have a large duodenal polyp requiring surgical excision. On histological examination, the polyp was revealed to be a lipoma. We review the recent literature and formulate a management plan for this rare entity

Crop Updates 2007 - Lupins, Pulses and Oilseeds

This session covers forty eight papers from different authors: 2006 REGIONAL ROUNDUP 1. South east agricultural region, Mark Seymour1 and Jacinta Falconer2, 1Department of Agriculture and Food, 2Cooperative Bulk Handling Group 2. Central agricultural region, Ian Pritchard, Department of Agriculture and Food 3. Great Southern and Lakes region, Rodger Beermier, Department of Agriculture and Food 4. Northern agricultural region, Wayne Parker and Martin Harries, Department of Agriculture and Food LUPINS 5. Development of anthracnose resistant and early flowering albus lupins (Lupinus albus L) in Western Australia, Kedar Adhikari and Geoff Thomas, Department of Agriculture and Food 6. New lupins adapted to the south coast, Peter White, Bevan Buirchell and Mike Baker, Department of Agriculture and Food 7. Lupin species and row spacing interactions by environment, Martin Harries, Peter White, Bob French, Jo Walker, Mike Baker and Laurie Maiolo, Department of Agriculture and Food 8. The interaction of lupin species row spacing and soil type, Martin Harries, Bob French, Laurie Maiolo and Jo Walker, Department of Agriculture and Food 9. The effects of row spacing and crop density on competitiveness of lupins with wild radish, Bob French and Laurie Maiolo, Department of Agriculture and Food 10. The effect of time of sowing and radish weed density on lupin yield, Martin Harries and Jo Walker, Department of Agriculture and Food 11. Interaction of time of sowing and weed management in lupins, Martin Harries and Jo Walker, Department of Agriculture and Food 12. Delayed sowing as a strategy to manage annual ryegrass, Bob French and Laurie Maiolo, Department of Agriculture and Food 13. Is delayed sowing a good strategy for weed management in lupins? Bob French, Department of Agriculture and Food 14. Lupins aren’t lupins when it comes to simazine, Peter White and Leigh Smith, Department of Agriculture and Food 15. Seed yield and anthracnose resistance of Tanjil mutants tolerant to metribuzin, Ping Si1, Bevan Buirchell1,2 and Mark Sweetingham1,2, 1Centre for Legumes in Mediterranean Agriculture, Australia; 2Department of Agriculture and Food 16. The effect of herbicides on nodulation in lupins, Lorne Mills1, Harmohinder Dhammu2 and Beng Tan1, 1Curtin University of Technology and 2Department of Agriculture and Food 17. Effect of fertiliser placements and watering regimes on lupin growth and seed yield in the central grain belt of Western Australia, Qifu Ma1, Zed Rengel1, Bill Bowden2, Ross Brennan2, Reg Lunt2 and Tim Hilder2, 1Soil Science & Plant Nutrition UWA, 2Department of Agriculture and Food 18. Development of a forecasting model for Bean Yellow Mosaic Virus in lupins, T. Maling1,2, A. Diggle1, D. Thackray1,2, R.A.C. Jones2, and K.H.M. Siddique1, 1Centre for Legumes in Mediterranean Agriculture, The University of Western Australia; 2Department of Agriculture and Food 19. Manufacturing of lupin tempe,Vijay Jayasena1,4, Leonardus Kardono2,4, Ken Quail3,4 and Ranil Coorey1,4, 1Curtin University of Technology, Perth, Australia, 2Indonesian Institute of Sciences (LIPI), Indonesia, 3BRI Australia Ltd, Sydney, Australia, 4Grain Foods CRC, Sydney, Australia 20. The impact of lupin based ingredients in ice-cream, Hannah Williams, Lee Sheer Yap and Vijay Jayasena, Curtin University of Technology, Perth WA 21. The acceptability of muffins substituted with varying concentrations of lupin flour, Anthony James, Don Elani Jayawardena and Vijay Jayasena, Curtin University of Technology, PerthWA PULSES 22. Chickpea variety evaluation, Kerry Regan1, Rod Hunter1, Tanveer Khan1,2and Jenny Garlinge1, 1Department of Agriculture and Food, 2CLIMA, The University of Western Australia 23. Advanced breeding trials of desi chickpea, Khan, T.N.1, Siddique, K.H.M.3, Clarke, H.2, Turner, N.C.2, MacLeod, W.1, Morgan, S.1, and Harris, A.1, 1Department of Agriculture and Food, 2Centre for Legumes in Mediterranean Agriculture, 3TheUniversity of Western Australia 24. Ascochyta resistance in chickpea lines in Crop Variety Testing (CVT) of 2006, Tanveer Khan1 2, Bill MacLeod1, Alan Harris1, Stuart Morgan1and Kerry Regan1, 1Department of Agriculture and Food, 2CLIMA, The University of Western Australia 25. Yield evaluation of ascochyta blight resistant Kabuli chickpeas, Kerry Regan1and Kadambot Siddique2, 1Department of Agriculture and Food, 2Institute of Agriculture, The University of Western Australia 26. Pulse WA Chickpea Industry Survey 2006, Mark Seymour1, Ian Pritchard1, Wayne Parker1and Alan Meldrum2, 1Department of Agriculture and Food, 2Pulse Australia 27. Genes from the wild as a valuable genetic resource for chickpea improvement, Heather Clarke1, Helen Bowers1and Kadambot Siddique2, 1Centre for Legumes in Mediterranean Agriculture, 2Institute of Agriculture, The University of Western Australia 28. International screening of chickpea for resistance to Botrytis grey mould, B. MacLeod1, Dr T. Khan1, Prof. K.H.M. Siddique2and Dr A. Bakr3, 1Department of Agriculture and Food, 2The University of Western Australia, 3Bangladesh Agricultural Research Institute 29. Balance® in chickpea is safest applied post sowing to a level seed bed, Wayne Parker, Department of Agriculture and Food, 30. Demonstrations of Genesis 510 chickpea, Wayne Parker, Department of Agriculture and Food 31. Field pea 2006, Ian Pritchard, Department of Agriculture and Food 32. Field pea variety evaluation, Kerry Regan1, Rod Hunter1, Tanveer Khan1,2 and Jenny Garlinge1, 1Department of Agriculture and Food, 2CLIMA, The University of Western Australia 33. Breeding highlights of the Australian Field Pea Improvement Program (AFPIP),Kerry Regan1, Tanveer Khan1,2, Phillip Chambers1, Chris Veitch1, Stuart Morgan1 , Alan Harris1and Tony Leonforte3, 1Department of Agriculture and Food, 2CLIMA, The University of Western Australia, 3Department of Primary Industries, Victoria 34. Field pea germplasm enhancement for black spot resistance, Tanveer Khan, Kerry Regan, Stuart Morgan, Alan Harris and Phillip Chambers, Department of Agriculture and Food 35. Validation of Blackspot spore release model and testing moderately resistant field pea line, Mark Seymour, Ian Pritchard, Rodger Beermier, Pam Burgess and Leanne Young, Department of Agriculture and Food 36. Yield losses from sowing field pea seed infected with Pea Seed-borne Mosaic Virus, Brenda Coutts, Donna O’Keefe, Rhonda Pearce, Monica Kehoe and Roger Jones, Department of Agriculture and Food 37. Faba bean in 2006, Mark Seymour, Department of Agriculture and Food 38. Germplasm evaluation – faba bean, Mark Seymour1, Terri Jasper1, Ian Pritchard1, Mike Baker1 and Tim Pope1,2, 1Department of Agriculture and Food, , 2CLIMA, The University of Western Australia 39. Breeding highlights of the Coordinated Improvement Program for Australian Lentils (CIPAL), Kerry Regan1, Chris Veitch1, Phillip Chambers1 and Michael Materne2, 1Department of Agriculture and Food, 2Department of Primary Industries, Victoria 40. Screening pulse lentil germplasm for tolerance to alternate herbicides, Ping Si1, Mike Walsh2 and Mark Sweetingham1,3, 1Centre for Legumes in Mediterranean Agriculture, 2West Australian Herbicide Resistance Initiative, 3Department of Agriculture and Food 41. Genomic synteny in legumes: Application to crop breeding, Phan, H.T.T.1, Ellwood, S.R.1, Hane, J.1, Williams, A.1, Ford, R.2, Thomas, S.3 and Oliver R1, 1Australian Centre of Necrotrophic Plant Pathogens, Murdoch University, 2BioMarka, University of Melbourne, 3NSW Department of Primary Industries 42. Tolerance of lupins, chickpeas and canola to Balanceâ(Isoxaflutole) and Galleryâ (Isoxaben), Leigh Smith and Peter White, Department of Agriculture and Food CANOLA AND OILSEEDS 43. The performance of TT Canola varieties in the National Variety Test (NVT),WA,2006,Katie Robinson, Research Agronomist, Agritech Crop Research 44. Evaluation of Brassica crops for biodiesel in Western Australia, Mohammad Amjad, Graham Walton, Pat Fels and Andy Sutherland, Department of Agriculture and Food 45. Production risk of canola in different rainfall zones in Western Australia, Imma Farré1, Michael Robertson2 and Senthold Asseng3, 1Department of Agriculture and Food, 2CSIRO Sustainable Ecosystems, 3CSIRO Plant Industry 46. Future directions of blackleg management – dynamics of blackleg susceptibility in canola varieties, Ravjit Khangura, Moin Salam and Bill MacLeod, Department of Agriculture and Food 47. Appendix 1: Contributors 48. Appendix 2: List of common acronym

A global spectral library to characterize the world's soil

Soil provides ecosystem services, supports human health and habitation, stores carbon and regulates emissions of greenhouse gases. Unprecedented pressures on soil from degradation and urbanization are threatening agro-ecological balances and food security. It is important that we learn more about soil to sustainably manage and preserve it for future generations. To this end, we developed and analyzed a global soil visible-near infrared (vis-NIR) spectral library. It is currently the largest and most diverse database of its kind. We show that the information encoded in the spectra can describe soil composition and be associated to land cover and its global geographic distribution, which acts as a surrogate for global climate variability. We also show the usefulness of the global spectra for predicting soil attributes such as soil organic and inorganic carbon, clay, silt, sand and iron contents, cation exchange capacity, and pH. Using wavelets to treat the spectra, which were recorded in different laboratories using different spectrometers and methods, helped to improve the spectroscopic modelling. We found that modelling a diverse set of spectra with a machine learning algorithm can find the local relationships in the data to produce accurate predictions of soil properties. The spectroscopic models that we derived are parsimonious and robust, and using them we derived a harmonized global soil attribute dataset, which might serve to facilitate research on soil at the global scale. This spectroscopic approach should help to deal with the shortage of data on soil to better understand it and to meet the growing demand for information to assess and monitor soil at scales ranging from regional to global. New contributions to the library are encouraged so that this work and our collaboration might progress to develop a dynamic and easily updatable database with better global coverage. We hope that this work will reinvigorate our community's discussion towards larger, more coordinated collaborations. We also hope that use of the database will deepen our understanding of soil so that we might sustainably manage it and extend the research outcomes of the soil, earth and environmental sciences towards applications that we have not yet dreamed of

New insights into the genetic etiology of Alzheimer's disease and related dementias

Characterization of the genetic landscape of Alzheimer's disease (AD) and related dementias (ADD) provides a unique opportunity for a better understanding of the associated pathophysiological processes. We performed a two-stage genome-wide association study totaling 111,326 clinically diagnosed/'proxy' AD cases and 677,663 controls. We found 75 risk loci, of which 42 were new at the time of analysis. Pathway enrichment analyses confirmed the involvement of amyloid/tau pathways and highlighted microglia implication. Gene prioritization in the new loci identified 31 genes that were suggestive of new genetically associated processes, including the tumor necrosis factor alpha pathway through the linear ubiquitin chain assembly complex. We also built a new genetic risk score associated with the risk of future AD/dementia or progression from mild cognitive impairment to AD/dementia. The improvement in prediction led to a 1.6- to 1.9-fold increase in AD risk from the lowest to the highest decile, in addition to effects of age and the APOE ε4 allele

A study of gas-solids flows at very high speed

An investigation of the flow of suspensions of solids particles in gases at high flow velocities has been carried out. A literature survey into gas-solids flow at both low and high speeds has revealed that most of the existing work on high speed flows is of a theoretical nature and has been stimulated as a result of the presence of solids particles in the exhaust gases of solid-fuelled rocket engines. In this project theoretical approaches are presented for both idealised flows where the solids and gas are in equilibrium or maintaining constant fractional lag and also for the more realistic case of variable gas-solids velocity and temperature ratios where solutions require numerical integration by a digital computer. The experimental approach has been limited to the flow of polystyrene solids particles in air through a long 1 in. nominal bore pipe at flows ranging from almost incompressible to choked flows. Measurements of air and solids mass flow rates, air velocity profiles and solids velocities have been obtained. The indications are that provided an estimation of the frictional drag due to the gas skin friction and the solids particle to particle and particle to duct wall interaction can be obtained, the numerical solution gives good results. The constant fractional lag theory gives indications of providing a Mach number expression capable of predicting the choked flow of gas-solids suspensions