Effects of vertical loading on lateral screw pile performance

The offshore wind energy sector faces new challenges as it moves into deeper water deployment. To meet these challenges, new and efficient foundation solutions are required. One potential solution is to upscale onshore screw piles but they require verification of performance for new geometries and demanding loading regimes. This paper presents a three-dimensional finite-element analysis investigation of screw pile behaviour when subjected to combined vertical and lateral loading in sand. In the investigation, the screw pile length and helical plate diameter were varied on piles with a fixed core diameter while subjecting the piles to combined axial and lateral loading. The results were compared with results from straight shafted piles with the same core diameter. The results of the analysis revealed that vertical compression loads increased the lateral capacity of the screw piles whereas vertical uplift loads marginally reduced the lateral capacity. The downside of this enhanced lateral capacity is that the screw piles experience higher bending moments. This suggests that, when using screw piles for offshore foundation applications, structures should be designed to maintain axial compressive loads on the piles and induced bending moments need to be adequately assessed when deciding on appropriate structural sections. </jats:p

On chip interconnects for multiprocessor turbo decoding architectures

International audienc

One-Dimension Finite Element Modeling of Grouted Ground Anchor

In the present research work, a one-dimension finite element model has been developed to simulate both compression and tension types of grouted ground anchors. The steel tendon-grout interface has been modeled by using the local bond-slip model, while the soil-grout interface has been modeled with a series of perfectly elastic plastic springs. The verification of the proposed one-dimension finite element model has been made by comparison of the model results with a three-dimension finite element model developed by commercial finite element software PLAXIS, and with the results of field tests of tension-type grouted ground anchor. A parametric study has been made to study the load-transfer mechanism for both types of anchors, compression, and tension. The compression-type anchor exhibits less displacement than the tension one under the same applied load. The developed strain in the grouted body of the compression-type anchor is much smaller than the tension-type one, regardless of the type of strain

Irreversible Aging Dynamics and Generic Phase Behavior of Aqueous Suspensions of Laponite

In this work we study the aging behavior of aqueous suspension of Laponite having 2.8 weight % concentration using rheological tools. At various salt concentration all the samples demonstrate orientational order when observed using crossed polarizers. In rheological experiments we observe inherent irreversibility in the aging dynamics which forces the system not to rejuvenate to the same state in the shear melting experiment carried out at a later date since preparation. The extensive rheological experiments carried out as a function of time elapsed since preparation demonstrate the self similar trend in the aging behavior irrespective of the concentration of salt. We observe that the exploration of the low energy states as a function of aging time is only kinetically affected by the presence of salt. We estimate that the energy barrier to attain the low energy states decreases linearly with increase in the concentration of salt. The observed superposition of all the elapsed time and the salt concentration dependent data suggests that the aging that occurs in low salt concentration systems over a very long period is qualitatively similar to the aging behavior observed in systems with high salt concentration over a shorter period.Comment: 27 pages, 8 figures. Langmuir, in pres

Melting and differentiation of early-formed asteroids: The perspective from high precision oxygen isotope studies

A number of distinct methodologies are available for determining the oxygen isotope composition of minerals and rocks, these include laser-assisted fluorination, secondary ion mass spectrometry (SIMS)and UV laser ablation. In this review we focus on laser-assisted fluorination, which currently achieves the highest levels of precision available for oxygen isotope analysis. In particular, we examine how results using this method have furthered our understanding of early-formed differentiated meteorites. Due to its rapid reaction times and low blank levels, laser-assisted fluorination has now largely superseded the conventional externally-heated Ni “bomb” technique for bulk analysis. Unlike UV laser ablation and SIMS analysis, laser-assisted fluorination is not capable of focused spot analysis. While laser fluorination is now a mature technology, further analytical improvements are possible via refinements to the construction of sample chambers, clean-up lines and the use of ultra-high resolution mass spectrometers. High-precision oxygen isotope analysis has proved to be a particularly powerful technique for investigating the formation and evolution of early-formed differentiated asteroids and has provided unique insights into the interrelationships between various groups of achondrites. A clear example of this is seenin samples that lie close to the terrestrial fractionation line (TFL). Based on the data from conventional oxygen isotope analysis, it was suggested that the main-group pallasites, the howardite eucrite diogenite suite (HEDs) and mesosiderites could all be derived from a single common parent body. However,high precision analysis demonstrates that main-group pallasites have a Δ17O composition that is fully resolvable from that of the HEDs and mesosiderites, indicating the involvement of at least two parent bodies. The range of Δ17O values exhibited by an achondrite group provides a useful means of assessing the extent to which their parent body underwent melting and isotopic homogenization. Oxygen isotope analysis can also highlight relationships between ungrouped achondrites and the more well-populated groups. A clear example of this is the proposed link between the evolved GRA 06128/9 meteorites and the brachinites. The evidence from oxygen isotopes, in conjunction with that from other techniques, indicates that we have samples from approximately 110 asteroidal parent bodies (∼60 irons, ∼35 achondrites and stony-iron, and ∼15 chondrites) in our global meteorite collection. However, compared to the likely size of the original protoplanetary asteroid population, this is an extremely low value. In addition, almost all of the differentiated samples (achondrites, stony-iron and irons) are derived from parent bodies that were highly disrupted early in their evolution. High-precision oxygen isotope analysis of achondrites provides some important insights into the origin of mass-independent variation in the early Solar System. In particular, the evidence from various primitive achondrite groups indicates that both the slope 1 (Y&R) and CCAM lines are of primordial significance. Δ17O differences between water ice and silicate-rich solids were probably the initial source of the slope 1 anomaly. These phases most likely acquired their isotopic composition as a result of UV photo-dissociation of CO that took place either in the early solar nebula or precursor giant molecular cloud. Such small-scale isotopic heterogeneities were propagated into larger-sized bodies, such as asteroids and planets, as a result of early Solar System processes, including dehydration, aqueous alteration,melting and collisional interactions

Exploring Takfir, Its Origins and Contemporary Use: The Case of Takfiri Approach in Daesh’s Media

Muslims have been the primary targets of Daesh’s attacks since 2014 in different countries such as Afghanistan, Iraq, and Syria. These attacks were based on its takfiri ideology. As Daesh official media and documents indicate, kufr (unbelief, infidelity) in Daesh’s approach is not limited to non-Muslims (original disbelievers), but Muslims are the most significant parts of kuffar (unbelievers) in its view and defined as incidental disbelievers. Through studying Daesh’s official documents and various Arabic, English, and Persian media productions, in an explanatory research, this article attempts to display Daesh’s takfiri approach toward Muslims and explains its historical and ideological roots, difference with Al-Qaeda’s takfiri approach, different approaches to takfir inside Daesh, main targets of Daesh’s takfir, and the reasons behinds its takfiri view. This article displays that for Daesh, the Muslims are limited only to Sunni Muslims who are accepting and following its approach. Other Sunni and non-Sunni Muslims are thus kuffar. This study also shows that the assertion of takfir has become a method for Daesh to discredit its opponents, such as Shi’a Muslims and other Muslim groups

Determinants of consumers’ intentions to share knowledge and intentions to purchase on s-commerce sites: incorporating attitudes toward persuasion attempts into a social exchange model

This research explores s-commerce users’ intentions to purchase and to share knowledge by incorporating ‘attitudes toward persuasion attempts,’ ‘ease of use,’ and ‘perceived usefulness’ into a social exchange theory model. A survey using an on-site purposive sampling technique was used to recruit the respondents, and an interception technique was used to approach the consumers. A total of 471 Korean consumers participated in this research. Based on 471 Korean social-commerce users, our results reveal that social exchange belief factors and a site’s usability affect user satisfaction, which subsequently affects users’ intentions to purchase and to share knowledge. In addition, attitudes toward persuasion attempts moderate the effect of satisfaction on users’ purchase intentions. Keywords: social exchange theory, attitudes toward persuasion attempts, intention to share knowledge, social exchange belief