Measurement of the Forward-Backward Asymmetry in the B -> K(*) mu+ mu- Decay and First Observation of the Bs -> phi mu+ mu- Decay

We reconstruct the rare decays $B^+ \to K^+\mu^+\mu^-$, $B^0 \to K^{*}(892)^0\mu^+\mu^-$, and $B^0_s \to \phi(1020)\mu^+\mu^-$ in a data sample corresponding to $4.4 {\rm fb^{-1}}$ collected in $p\bar{p}$ collisions at $\sqrt{s}=1.96 {\rm TeV}$ by the CDF II detector at the Fermilab Tevatron Collider. Using $121 \pm 16$ $B^+ \to K^+\mu^+\mu^-$ and $101 \pm 12$ $B^0 \to K^{*0}\mu^+\mu^-$ decays we report the branching ratios. In addition, we report the measurement of the differential branching ratio and the muon forward-backward asymmetry in the $B^+$ and $B^0$ decay modes, and the $K^{*0}$ longitudinal polarization in the $B^0$ decay mode with respect to the squared dimuon mass. These are consistent with the theoretical prediction from the standard model, and most recent determinations from other experiments and of comparable accuracy. We also report the first observation of the $B^0_s \to \phi\mu^+\mu^- decay and measure its branching ratio${\mathcal{B}}(B^0_s \to \phi\mu^+\mu^-) = [1.44 \pm 0.33 \pm 0.46] \times 10^{-6}$using$27 \pm 6$signal events. This is currently the most rare$B^0_s$ decay observed.Comment: 7 pages, 2 figures, 3 tables. Submitted to Phys. Rev. Let

Measurements of the properties of Lambda_c(2595), Lambda_c(2625), Sigma_c(2455), and Sigma_c(2520) baryons

We report measurements of the resonance properties of Lambda_c(2595)+ and Lambda_c(2625)+ baryons in their decays to Lambda_c+ pi+ pi- as well as Sigma_c(2455)++,0 and Sigma_c(2520)++,0 baryons in their decays to Lambda_c+ pi+/- final states. These measurements are performed using data corresponding to 5.2/fb of integrated luminosity from ppbar collisions at sqrt(s) = 1.96 TeV, collected with the CDF II detector at the Fermilab Tevatron. Exploiting the largest available charmed baryon sample, we measure masses and decay widths with uncertainties comparable to the world averages for Sigma_c states, and significantly smaller uncertainties than the world averages for excited Lambda_c+ states.Comment: added one reference and one table, changed order of figures, 17 pages, 15 figure

Search for a New Heavy Gauge Boson Wprime with Electron + missing ET Event Signature in ppbar collisions at sqrt(s)=1.96 TeV

We present a search for a new heavy charged vector boson $W^\prime$ decaying to an electron-neutrino pair in $p\bar{p}$ collisions at a center-of-mass energy of 1.96\unit{TeV}. The data were collected with the CDF II detector and correspond to an integrated luminosity of 5.3\unit{fb}^{-1}. No significant excess above the standard model expectation is observed and we set upper limits on $\sigma\cdot{\cal B}(W^\prime\to e\nu)$. Assuming standard model couplings to fermions and the neutrino from the $W^\prime$ boson decay to be light, we exclude a $W^\prime$ boson with mass less than 1.12\unit{TeV/}c^2 at the 95\unit{%} confidence level.Comment: 7 pages, 2 figures Submitted to PR

Prototype ATLAS IBL Modules using the FE-I4A Front-End Readout Chip

The ATLAS Collaboration will upgrade its semiconductor pixel tracking detector with a new Insertable B-layer (IBL) between the existing pixel detector and the vacuum pipe of the Large Hadron Collider. The extreme operating conditions at this location have necessitated the development of new radiation hard pixel sensor technologies and a new front-end readout chip, called the FE-I4. Planar pixel sensors and 3D pixel sensors have been investigated to equip this new pixel layer, and prototype modules using the FE-I4A have been fabricated and characterized using 120 GeV pions at the CERN SPS and 4 GeV positrons at DESY, before and after module irradiation. Beam test results are presented, including charge collection efficiency, tracking efficiency and charge sharing.Comment: 45 pages, 30 figures, submitted to JINS

L1pred: A Sequence-Based Prediction Tool for Catalytic Residues in Enzymes with the L1-logreg Classifier

To understand enzyme functions, identifying the catalytic residues is a usual first step. Moreover, knowledge about catalytic residues is also useful for protein engineering and drug-design. However, to experimentally identify catalytic residues remains challenging for reasons of time and cost. Therefore, computational methods have been explored to predict catalytic residues. Here, we developed a new algorithm, L1pred, for catalytic residue prediction, by using the L1-logreg classifier to integrate eight sequence-based scoring functions. We tested L1pred and compared it against several existing sequence-based methods on carefully designed datasets Data604 and Data63. With ten-fold cross-validation, L1pred showed the area under precision-recall curve (AUPR) and the area under ROC curve (AUC) of 0.2198 and 0.9494 on the training dataset, Data604, respectively. In addition, on the independent test dataset, Data63, it showed the AUPR and AUC values of 0.2636 and 0.9375, respectively. Compared with other sequence-based methods, L1pred showed the best performance on both datasets. We also analyzed the importance of each attribute in the algorithm, and found that all the scores contributed more or less equally to the L1pred performance

Complex Product Architecture Analysis using an Integrated Approach

yesProduct design decomposition and synthesis is a constant challenge with its continuously increasing complexity at each level of abstraction. Currently, design decomposition and synthesis analytical tasks are mostly accomplished via functional and structural methods. These methods are useful in different phases of design process for product definition and architecture but limited in a way that they tend to focus more on ‘what’ and less on ‘how’ and vice versa. This paper combines a functional representation tool known as System State Flow Diagram (a solution independent approach), a solution search tool referred as Morphology Table, and Design Structure Matrix (mainly a solution dependent tool). The proposed approach incorporates Multiple Domain Matrix (MDM) to integrate the knowledge of both solution independent and dependent analyses. The approach is illustrated with a case study of solar robot toy, followed by its limitations, future work and discussion

Reconstructing Native American Population History

The peopling of the Americas has been the subject of extensive genetic, archaeological and linguistic research; however, central questions remain unresolved1–5. One contentious issue is whether the settlement occurred via a single6–8 or multiple streams of migration from Siberia9–15. The pattern of dispersals within the Americas is also poorly understood. To address these questions at higher resolution than was previously possible, we assembled data from 52 Native American and 17 Siberian groups genotyped at 364,470 single nucleotide polymorphisms. We show that Native Americans descend from at least three streams of Asian gene flow. Most descend entirely from a single ancestral population that we call “First American”. However, speakers of Eskimo-Aleut languages from the Arctic inherit almost half their ancestry from a second stream of Asian gene flow, and the Na-Dene-speaking Chipewyan from Canada inherit roughly one-tenth of their ancestry from a third stream. We show that the initial peopling followed a southward expansion facilitated by the coast, with sequential population splits and little gene flow after divergence, especially in South America. A major exception is in Chibchan-speakers on both sides of the Panama Isthmus, who have ancestry from both North and South America

Complex Product Architecture Analysis using an Integrated Approach

yesProduct design decomposition and synthesis is a constant challenge with its continuously increasing complexity at each level of abstraction. Currently, design decomposition and synthesis analytical tasks are mostly accomplished via functional and structural methods. These methods are useful in different phases of design process for product definition and architecture but limited in a way that they tend to focus more on ‘what’ and less on ‘how’ and vice versa. This paper combines a functional representation tool known as System State Flow Diagram (a solution independent approach), a solution search tool referred as Morphology Table, and Design Structure Matrix (mainly a solution dependent tool). The proposed approach incorporates Multiple Domain Matrix (MDM) to integrate the knowledge of both solution independent and dependent analyses. The approach is illustrated with a case study of solar robot toy, followed by its limitations, future work and discussion

Mechanisms of stretch-mediated skin expansion at single-cell resolution.

The ability of the skin to grow in response to stretching has been exploited in reconstructive surgery1. Although the response of epidermal cells to stretching has been studied in vitro2,3, it remains unclear how mechanical forces affect their behaviour in vivo. Here we develop a mouse model in which the consequences of stretching on skin epidermis can be studied at single-cell resolution. Using a multidisciplinary approach that combines clonal analysis with quantitative modelling and single-cell RNA sequencing, we show that stretching induces skin expansion by creating a transient bias in the renewal activity of epidermal stem cells, while a second subpopulation of basal progenitors remains committed to differentiation. Transcriptional and chromatin profiling identifies how cell states and gene-regulatory networks are modulated by stretching. Using pharmacological inhibitors and mouse mutants, we define the step-by-step mechanisms that control stretch-mediated tissue expansion at single-cell resolution in vivo.Wellcome Trust Royal Societ