Environmental application for GIS: assessing Iskandar Malaysia's (IM) sewage sludge for potential biomass resource

The low carbon scenario could be achieved through the identification of major sectors contributing to the emission of high greenhouse gases (GHG) into the atmosphere. Sewage treatment plant (STP) was ranked as one of the major sectors that emits methane gas (CH4) during treatment processes, including sludge treatment. Sludge treatment is also capital extensive with high operational cost. Thus, sewage sludge has been accepted as a nuisance in STP. However, many has claimed that, sludge produced contain organic matter that has the potential for biomass resource. Thus, it would be such a waste? if sludge are directly disposed of into the landfill without utilizing them at its full potential. In order to do so, it is vital to be able to determine the amount of sludge production. This research was implemented in Iskandar Malaysia regions in the state of Johor. By using GIS tool, the regions that produced the most sewage sludge can be determined, and can be group as critical area. Result shows that Nusajaya produces the most, compared to other regions, which indicated Nusajaya as a densely populated region

Distribution Voltage in DC Micro-grid System based Solar PV Topologies Configuration in Sarawak, Malaysia

In the past few decade, longhouse communities in the rural area of Sarawak has been experienced the limitation of electricity supplies. Due to geographic of Sarawak, supply electricity to these rural areas from utility grid through transmission lines also will only results in many losses, the initiation of utilize solar as prime sources is favourable solution. The implementation of DC microgrid system for this area will achieved, as the solar PV system is a DC source to generate electrical supply for appliances in longhouse communities. However, the tropical climate and geographical in Sarawak such as the inconsistent solar radiation, changing temperatures, high humidity and heavy rainfall will be the main restrain to implement solar DC microgrid system. Thus, this paper proposes a comprehensive study about the voltage distribution of DC microgrid configuration in order to investigate system the reliability and efficiency. The configuration of DC micro-grid model has been designed using MATLAB Simulink and an experimental presenting the Simulink also has been developed for validation purposes. The obtained simulation and experimental results confirm that the proposed configuration of the ring system with multiple-sources is more reliable and efficient than radial system with multiple-source configuration in terms of DC voltage distribution at different buses. Thus, the proposed configuration is more reliable according to voltage distribution at each buses

Enhancing the decolorization of methylene blue using a low-cost super-absorbent aided by response surface methodology

The presence of organic dyes from industrial wastewater can cause pollution and exacerbate environmental problems; therefore, in the present work, activated carbon was synthesized from locally available oil palm trunk (OPT) biomass as a low-cost adsorbent to remove synthetic dye from aqueous media. The physical properties of the synthesized oil palm trunk activated carbon (OPTAC) were analyzed by SEM, FTIR-ATR, and XRD. The concurrent effects of the process variables (adsorbent dosage (g), methylene blue (MB) concentration (mg/L), and contact time (h)) on the MB removal percentage from aqueous solution were studied using a three-factor three-level Box–Behnken design (BBD) of response surface methodology (RSM), followed by the optimization of MB adsorption using OPTAC as the adsorbent. Based on the results of the analysis of variance (ANOVA) for the three parameters considered, adsorbent dosage (X1) is the most crucial parameter, with an F-value of 1857.43, followed by MB concentration (X2) and contact time (X3) with the F-values of 95.60 and 29.48, respectively. Furthermore, the highest MB removal efficiency of 97.9% was achieved at the optimum X1, X2, and X3 of 1.5 g, 200 mg/L, and 2 h, respectivel

Structural crack detection system using internet of things (IoT) for structural health monitoring (SHM): a review

Monitoring the state of civil engineering infrastructure is critical for a country’s economic development since structures with long service life and timely maintenance have lower reconstruction costs. Crack occurrence is the most important element that influences the performance and lifespan of civil infrastructures like bridges and pipelines. As a result, several fracture detection and characterization approaches have been explored and developed in the domains of Structural Health Monitoring (SHM) throughout the last few decades. The major goal of implementing the Internet of Things (IoT) paradigm is to enable the Internet-based connectivity extension of various typical SHM devices. As a result, connected devices can communicate and process data, opening new possibilities in the design of acquisition systems in various disciplines of research and engineering. The researchers have extended the application of the IoT paradigm to the SHM crack detection because of the advances, ensuring that the tests done in this framework can produce good results with promising future improvements. Thus, this paper reviews structural crack detection based IoT for SHM as reported by previous research in the literature. The strengths and limitations of current systems are discussed. This paper is aimed to serve as a reference for crack detection and characterisation researchers as well as others who are interested in SHM in general. In addition, several case studies on real structures, as well as laboratory experiments for monitoring structural crack health of civil engineering structures, are also presented

Generation Y employees and their perceptions of work-life balance practices

The objective of this study is to identify the perceptions of Generation Y employees regarding work-life balance practices. As increasing numbers of Generation Y enter the workforce, questions regarding how they perceive work, family and self-related issues, challenges and coping strategies in balancing personal and professional commitments became issues of interests for employers. This study uses interviews to collect data from six informants in Generation Y and the data were analyzed through content analysis. The results indicate that Generation Y employees do indeed have issues and challenges with balancing work and family. However, unlike the older generation of employees, Generation Y employees perceive managing work-life balance only through segmentation or separation strategies. This particular finding indicates that if organizations want to attract and retain these employees they should adapt a strategy specifically designed to target this employee group

A Review of Antennas for Picosatellite Applications

Cube Satellite (CubeSat) technology is an attractive emerging alternative to conventional satellites in radio astronomy, earth observation, weather forecasting, space research, and communications. Its size, however, poses a more challenging restriction on the circuitry and components as they are expected to be closely spaced and very power efficient. One of the main components that will require careful design for CubeSats is their antennas, as they are needed to be lightweight, small in size, and compact or deployable for larger antennas. This paper presents a review of antennas suitable for picosatellite applications. An overview of the applications of picosatellites will first be explained, prior to a discussion on their antenna requirements. Material and antenna topologies which have been used will be subsequently discussed prior to the presentation of several deployable configurations. Finally, a perspective and future research work on CubeSat antennas will be discussed in the conclusion

The future of Malay–Chinese relations in Malaysia

In this chapter, the Malay–Chinese relation is examined by considering the history and nature of the relationship, the ensuing intergroup conflict, and the steps taken by the government and civil society groups to address the conflict. Finally, a psychocultural approach to building peace between the two groups is proposed

The elite's collective subjectivities of the history of ethnic politics in Malaysia

Malaysia is one of the multi-ethnic, multi-cultural and multi-religious countries in Southeast Asia. Due to the pluralistic nature of Malaysia, it has a political structure based on ethnic politics. The ethnic preferential policies affected most domains of this country. The objective of this article is to examine the origin and background of ethnic politics in Malaysia. Findings of this study indicate that, ethnic politics originated during the British colonial period, it became a tool used by the Barisan Nasional for the legitimacy of regime. Moreover, ethnic politics in Malaysia today is intertwined with religion. Besides, there is the dilemma of the choice between the interest of certain ethnic group and national interests. However, with the opposition coalition Pakatan Harapan won the election in 9th May, UMNO-led BN lost power and interrupted its 61 years control, which leaves us an interesting topic to think about the future of Malaysian ethnic politics

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London